EOI : Microtech GB and tune
well kiddies, some of you already know that a few people are interested in getting a microtech ecu and getting it tuned. so why not GB it? cheaper to buy the units and cheaper to install and tune as it should take less time to tune 5 cars (etc) than 1 car individually.
I dont have prices yet, but i am going to contact mazfix at springwood, kp performance at salisbury and dyson rotary at labrador. i'd like to be able to go to them in around 3-4 weeks with definate numbers. kiddies this WILL require atleast a $50-$100 initial deposit each before i go to them so i can show them we're serious, coz getting a quote for 8 people, having them order in the ecu's then only going through with 3 would really really suck for us and them. i'm really really hoping we could get them installed and tuned for a decent amount under $1500. gav was quoted (over the phone) $2k, but i'm sure that was a top price and seeing them in person with cash to fork over and confirming a few cars will get the price well down. so far those who are interested are myself, chicaboo, puppa snert and boostedbatperson. gav and I will be getting the LT-8s model (used for the 4's) and pete will be getting the LT-12s (used for the 6's). for info see www.microtechefi.com so who's in? |
We need to talk to Archie again from Mazfix, he actually quoted me standard price of $1900 for manuals and $2100 for autos (tuned in 3d matrix mode). But now the auto is no more we'll be pressing them down on the $1900, so I think $1500 is pretty doable.
This is a very good mod peoples, my whole exhaust would've been close to $1400 by the time it was finished, so a technical item like this would be well worth it. I don't know if people will all be able to do it in 3-4 weeks, we can ask them what spread of time the group buy can run over for the agreed price. They can't tune 8 cars all at once afterall. Ummm, I dunno if I'd have my cams done by then too, and I don't wanna pay another $300-400 every time I make a change on my car and need new tuning.... |
I wish I could afford this right now... how much would it cost for the ecu alone in this GB? (no tuning since i'm in sydney).
Can't wait to see some dyno numbers! |
LT-8S costs $1050rrp.
|
Would the ecu be much cheaper due to the group buy, or is the savings mainly on the tuning side? Cheers.
|
what exactly needs to be setup... if you had a 1.8 a 2.0 and a 1.6 (talking BJ here) tuned up then couldn't you save the settings, and transfer them around?
|
The new engine wont be complete for a while yet Andy as you are aware due to my job placement since leaving my old firm but I will definately be in on the purchase and get it tuned later so if other southerners want a cheaper purchase they should be able to also sort out a purchase price with the GB.
Quote:
|
yeah i knew that much, i was thinking adjust the ecu a lil bit, as it would be close enough to run i'd think...
|
dur, i just realised that i didnt say "we'll go to them in 3-4 weeks, then arrange everything for 8 weeks". woops.
savings will be on everything, purchase, install and tune |
I have a microtech in my BA... The microtech guys should have it pre-programmed before you get it. Then it should go in and be ready to go. But will not go prefectly until u put it on a dyno.
I live on the Sunshine Coast and had to go to Maxfix to go it dynoed. By the time we were half way down we had the thing pretty much turned. It was funny running down the Bruce Highway between speeds of 40kmph and 160kpmh. It took 35minutes on the dyno and we were finished. What I'm trying to say is that the dyno time should be minimal for you guys as it should be pregrommed and someone will have had their car done before yours on the dynos. The mapping points will only need minor tweeking as Pete pointed out in the previous post. All up it costed me $1300.00. Any more over $1500.00 would be a total rip off. Ryan |
yeah it's just a matter of going to them and waiving the cash in front of them and say gimme gimme gimme
|
What kind of gains am i expected to achieve with the Microtech?
Is it worthwhile for me for the mods i got?Or should i also upgrade cams?? |
That is a very good question!!!
Depends on what sort of gains that ur looking for. The computer is the most exspensive mod for any car. Some people think that a new ECU is a waste of money for your car because the money can be spent elsewhere on cheaper mods. I have had words over this issue before with a fellow AGT member. Anywayz, back to your question:- U have a larger diameter exhaust/extractor and ram intake system. Your car is now sucking/exhaling more air than standard and you have gained some kW's. Your car is still thinking that it is sucking the same amount of air because the ECU tells you it is. Some things a programmable ECU can do for you:- More BHP/kW's (depends on engine/mods/etc) Better fuel comsumpion (I gained 50km per tank) Smoother running (reaches redline quicker) If you had a fully programable computer then you can change the settings and uterlise the extra air better than the standard computer does. This is only one example of what a ECU can do. I hope I didn't go too rocket-sciencetist on you. I tried to explain it as best I could. Ryan P.S. Yeah, do the cams also if you got the cash. |
Quote:
For my next question would this be worth looking into also for a smidgen more as an option and would the gains be worth it as an addition. I am not so knowledgable in this area so I will leave it up to someone else to figure it out |
Just like Coil Packs:-
Smoother idle Bigger spark Smoother accel Ryan |
arden - atleast, and this is an absolute least, 15whp at the wheels. i expect to get somewhere above 20-25whp. i might even get 30whp increase.
it is commonly reckognised as the single best power mod per dollar of any mod for an NA car. but also, since gav will be wanting an exhaust cam very very soon, maybe we should think of a GB for them too? the program i use (dyno2003) to check cam specs say the stock intake cam is pretty close to right (a tiny bit small) for max area under the power curve from 3500rpm-7000rpm, but the exhaust cam is very weak. bat - i guess what means we need to get them since the new models dont have internal igniters? |
Yeah and you know what kind of cams I will be getting so I need all the help I can get
|
Andrew, can I buy your old exhaust cam and have it reground? I wouldn't mind doing that if it's ok with you, this way I will still have a clean set of 1.8 cams if I ever boost and need to remove the lumpy cams...
|
Are you guys still doing that GB? If so i'll be interested in getting the Microtech too.
|
absolutely!
|
All times are GMT +10. The time now is 01:19 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT