ABOUT: Astina Clutch Sizes
Just putting this up as a reference to anyone looking at new clutches.
======================================= Make Year OD x ID X Splines ======================================= BG / BG Astina 89-3/91 200 x 22.2 x 20 BG / BG Astina 4/91-94 200 x 22.2 x 20 BG Astina SP 3/91-94 215 x 24.5 x 22 BH Protege (1.6) 6/94-98 200 x 22.2 x 20 BA Astina / BH Protege ( 1.8 ) 7/94-8/95 225 x 24.5 x 22 BA Astina / BH Protege ( 1.8 ) 9/95-9/98 200 x 22.2 x 20 BA Astina ( V6 ) 7/94-98 225 x 24.5 x 22 ======================================= |
So have you found the Daiken HD clutch yet for your car ???
Can you also post up the sizes for the other 323 models gtx etc etc. Ta Mal |
No dice on daikin clutch. As far as they are concerened, it doesnt exist and no-one has been able to tell me otherwise.
GTX runs a 230mm clutch plate. Dont know anymore about it untill we pull the engine out. |
But you can tell by the spline if it will fit your gearbox as a first point of
checking. Mal |
Jimbo you have to post up the details for the guy in brissy as I will need the same
clutch as you when I change over gearboxes. Has the motor and gearboxes been delivered yet ?? Mal |
Basically the guys are providing a standard daikin upgrade kit (full face organic plate with ~400kg pressure plate) and replacing the diaphram spring with a HD item from i believe a holden of some description which will give the pressure plate a clamp load of about 1900pounds (~800kg). Cost is about $370 delivered to the door.
|
Nicks Performance Clutches
Unit 1/594 Boundary Rd, Archerfield QLD 4108 Ph: (07) 3277 9403 Fax: (07) 3277 9478 Exert from my last email to them: "If you were to run 800kg of clamp pressure your clutch should be capable of holding approx 225 kw at the flyheel @5000rpms or 320 ft lb of torque.Cost of a full faced organic kit with 800kg of clamp would cost $315 inc gst+ freight" |
Hallo all!
This may be my first post out of many in the future here! I'm living in (sunny) England here, and I have a 1.8ltr DOHC 98 323f(BA) with what seem's to be a slippery clutch which has lasted me only 12000 miles/ 19,300 Kms!!! :cry: Not good at all, it was changed less than 10 months ago! I reckon it was the dodgy garage I used, false economy. Up on this thread you've listed the: BA Astina / BH Protege ( 1.8 ) 9/95-9/98 200 x 22.2 x 20 -and you also mentioned the Daikin clutches. Daikin seem to have re-branded themselves to "Exedy" and in their website they have a PDF file with their full product listing: http://www.exedy.com.au/data/clutch_..._catalogue.pdf -on page 27 of that PDF, would the clutch for our cars be the: "Astina BA11P, Protege BH, 1.8 Ltr 16v DOHC" product code: MZK-6547HD (the HD bit stands for Heavy Duty :D ) If this is the one, I'll be ordering one tomorrow! Any ideas chaps?! Thank you!!!!! |
Daikin is owned by exedy and yes thats the part number for the late model BA astinas.
Expect to pay around $350 for it |
Woah! Speeeedy response! $350 ozzy dollars? Thats around £150! Velly good! :lol: It seems a UK arm of Exedy exists in UK, gonna give em a call as soon as it's day light.
Thank you again! |
Yeah i have just ordered a Exedy Extreme Clutch kit (heavy duty)has cost me $365.been told good things about these clutches :wink:
|
Yes I have used the 730kg pressure plate HD Daiken clutch on my turbo and after 3 years
had heaps of meat left in it and only needed replacing as a broken diff in the gearbox spewed oil all over it. The current one has been flawless again for the last year am really happy with it for a 8" clutch handling a tiurbo motor. Mal |
Does any1 happen to know what type of clutch the astinas come standard with?The reason im asking is because the clutch that was pulled out of my car while the gearbox was out was an exedy clutch :?
Either thats what they were rolled of the factory floor with,or my clutch was replaced b4 i bought the car which had 50,000kms on it at the time,if this clutch wasnt a factory item that means my car is on its 3rd clutch at 95,000kms :? Can any1 confirm whether the BA Astina came with an exedy clutch standard? |
323F BA 1.5l engine
Hi there,
I'm a proud owner of a Lantis . At the moment I am fitting a turbo on my 1.5l engine. I need to change the clutch/pressure plate to hold on 180bhp. can anyone help ? I need to know the size and splines . Cheers :wink: |
i have a daiken exeddy HD clutch kit sitting on my floor MKZ-6890HD. your box the same theo??
$280 from rank rotary, mentone, vic on that note......are the S1 BA astina and the V6 BA astina clutches the same?????? if so would the gearboxes be interchangable????? maybe some wishful thinking but still some food for thought :P cheers mike |
Re: 323F BA 1.5l engine
Quote:
|
And for those (like me) with a BG 1.6L SOHC, the following data was available from exedy:
Size & Spline OD x No of Teeth: 190X22.75X20 Standard Clutch Kit Clutch Kit: MZK-6881 Cover Assembly: MZC528 Clutch Disc: MZD004U Release Bearing: BRG2237 Sports Tough Clutch Kits Heavy Duty Kit: MZK-6881HD Heavy Duty Button Kit: MZK-6881HDB |
i have just bought a diaken/exeddy heavy duty clutch , it is 30% more clamping power then the standard , i can get them for $280 full kit
|
BA V6 Astina '94 Heavy Duty Clutch Kit
G'day,
I have been getting some quotes from different mobs around Brisvegas/Gold Coast for a new clutch for the V6 Astina. Getting about the same price for the clutch kit but they don't give me the part number so that I can check that it is the same clutch I am being quoted on. Anyone know what the part number is for a Daikin heavy duty clutch for the Astina?? I checked the Exedy site and came up with the following: MZK-6540HDCB Does anyone know if this is the one I need? Cheers Doug |
How can you adjust the hydraulic clutch of a BA astina ?
|
All times are GMT +10. The time now is 03:43 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT