AstinaGT Forums

AstinaGT Forums (http://www.astinagt.com/forums/index.php)
-   Interior & Electrics (http://www.astinagt.com/forums/forumdisplay.php?f=9)
-   -   SP20 Door Lock (http://www.astinagt.com/forums/showthread.php?t=18285)

holmesy 22-08-2011 12:26 PM

SP20 Door Lock
 
Got a 2003 SP20 Hatch, my rear door lock is grinding when i open and close the door via remote. It does not unlock the door. Any ideas? is it possible to fix yourself?

Mad Mat 22-08-2011 12:58 PM

pull the inside trim off and have a look and see where the noise is coming from.... thats all u can do.. might be just the actuator but pull the trim off and see first ;)

comical_imbalance 29-11-2011 06:44 PM

I have this same problem, and it has been driving me mad for months. The Rear-Right door will not lock or unlock with the central locking, but a grinding noise can be heard, as if the motor is trying to work, but can't.

I have taken the trim off, and can tell that the noise is coming from the top right of the door, as pictured. If you rest a hand on the wire that travels between the locking motor and either the door handle or the locking knob, you can feel the motor moving.

Has anyone had this before?
How do you go about removing the black plastic guard in the picture? It is impossible to even get a hand in there as it is!

http://i138.photobucket.com/albums/q...ock/photo7.jpg

Any help appreciated, as this has been doing my head in!

chicaboo 29-11-2011 08:23 PM

Until you get a replacement unit, just disconnect the wiring so it doesn't struggle and drive you nuts. On the odd occasion you use the door you will need to open it manually, not a big deal.

phildough 29-11-2011 08:40 PM

I have had the same issue, I swapped the whole lock mechanism out of another door.

JDM323 29-11-2011 09:12 PM

Quote:

Originally Posted by comical_imbalance (Post 277744)
I have this same problem, and it has been driving me mad for months. The Rear-Right door will not lock or unlock with the central locking, but a grinding noise can be heard, as if the motor is trying to work, but can't.

I have taken the trim off, and can tell that the noise is coming from the top right of the door, as pictured. If you rest a hand on the wire that travels between the locking motor and either the door handle or the locking knob, you can feel the motor moving.

Has anyone had this before?
How do you go about removing the black plastic guard in the picture? It is impossible to even get a hand in there as it is!

http://i138.photobucket.com/albums/q...ock/photo7.jpg

Any help appreciated, as this has been doing my head in!

you simply pull up at the rear as they are not an enclosed hole
can't remember if the thing comes all the way off or just swings aside
then you remove the main latch from the door
the actuator is attached to it
will have stripped the gears inside

Rhys 30-11-2011 08:20 PM

I had this problem too. It's the actuator cog. You can buy another actuator from the wreckers or try and find another cog on ebay or the likes. I bought a cog off ebay but sadly it doesn't look like the guys I bought mine off sell them at the moment..

Clean_Cookie 30-11-2011 08:23 PM

I remember at a coffee meet this year we all had failed locks on the same door!

z100 30-11-2011 08:25 PM

I have the exact same problem, passenger door on the drivers side. Looks like a trip to the wreckers for me. Maybe we should get a poll going, see which door lock fails most! :p

Rhys 30-11-2011 08:34 PM

Quote:

Originally Posted by tc3_racer_001 (Post 277868)
I remember at a coffee meet this year we all had failed locks on the same door!

Hahaha except me! because I'm clever and did it before =D

speaking of coffee meets, we should catch up again soon.


I think it was all rear left hand doors for us wasn't it?

phildough 30-11-2011 08:43 PM

It was my passengers side rear that failed.

Ben 30-11-2011 08:51 PM

Simple change of the actuator isn't it? Everywhere sells them...

no_good_with_cars 16-09-2015 04:06 PM

They want to charge me $785
 
Hi,

I am experiencing the same problem as all of you below.

It has occurred in 3 out of the 4 doors.

A Mazda dealer has quoted me $785 to fix. Can i buy these off ebay or through anywhere else and if so where?

Regards,
John


All times are GMT +10. The time now is 09:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT