AstinaGT Forums

AstinaGT Forums (http://www.astinagt.com/forums/index.php)
-   Interior & Electrics (http://www.astinagt.com/forums/forumdisplay.php?f=9)
-   -   JDM folding side mirrors install ? 2 wires ? (http://www.astinagt.com/forums/showthread.php?t=22187)

Noble323 09-04-2017 06:10 AM

JDM folding side mirrors install ? 2 wires ?
 
Hey all.

Thought I'd start a thread because I couldn't find it anywhere here.

With the 2 wires people are talking about that's needed so the passenger one will work.

Is it just simply the red and white wire from the drivers side mirror running these across to the passenger side mirror and connecting them and that's it ? The connecting is on the little electrical loom on the actual mirrors not car loom (hope that makes sense) :)

Thanks.

JDM323 17-04-2017 09:40 PM

From A-pillar plug to A-pillar plug, details in my build, link below.

Noble323 19-04-2017 02:20 AM

Cool.
Just went through your build thread :)

My first post was with the incorrect colour of wires was meant to say red and grey (not red and white)

Okay I understand what you did but won't it work as well if I ran 2 wires from the drivers side mirror loom that's the red and grey wires and run that to the passenger side connecting it to the passenger mirror loom of the grey and red ?

That should still work that way ? Not as neat as yours but a quicker way for them to communicate.

JDM323 20-04-2017 02:12 AM

yes you can, but if you pick those up at the inner pillar plugs it leaves the ability to remove door easily still.

Noble323 20-04-2017 08:32 AM

Thanks for that.
Yeah I'll figure something out, just wanted to double check with those wires. But might actually do it like the way yours is. Now let's hope I don't get lazy and leave it for a long time before I do it.


All times are GMT +10. The time now is 09:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT