Catalina
Hey guys,
Updated 2-01-2014 Engine: original STAGE 1 - GTX intake mani - BP NA Crank - GTX injectors (sitting in work car) - GTX ECU - Mtuned fuel rail - ARB head bolts - FMIC (sitting in shed) - CP 9.0:1 forged Pistons - Manely forged rods - GTX head with BP series 3 NA internals (cams, shims, ect) - MX5 oil pump - mazda waterpump - VJ20 turbo and manifold - HPC coated 3 inch exhaust & high flow cat NEW STAGE 1 - GTX intake mani - BP NA Crank - Mtuned fuel rail - ARB head bolts - FMIC (sitting in shed) - CP 9.0:1 forged Pistons - Manely forged rods - GTX head with BP series 3 NA internals (cams, shims, ect) - MX5 oil pump - mazda waterpump - HPC coated 3 inch exhaust & high flow cat - EVO 8.5 turbo - Adaptronic 420c - 1000cc injectors STAGE 2 - Custom Turbo cams - E85 Fuel pump and fuel lines Gearbox: - SW20 toyota Hybrid box - Custom selection of longer ratio gears from multiple toyota boxes - Quafe LSD - 1st to 4th GT4 rally 3 piece syncros - Extra 3rd and 4th gear oil squiters - Full bearing kit - steal 3rd to 4th selector Fork (still have the Ally 1st to 2nd Fork) - Recondisioned Toyota levin superchaged Drive shafts (much thinker than the corolla shafts) Exterior: - JDM front bar + indicator relocation - Type-R mini-skirts - Mazda front lip - Smoked side indicators - Driving lights - MS01's 17x8 +35 - KU36's 235x45r/R17 - 17x7" Osaka G-TEK OLD Suspension: - Yellow Speed coilovers 8kg fronts and 5kg rears - Cusco adjustable strut tops - Cusco A-arm brace - full nolathane bush kit - Whiteline rear swaybar - v6 hub swap - Eunos 800m front 2 spot calipers - DBA rear slotted T2 disc and QFM pads Interior, ICE & Electrics - pioneer Bluetooth mp3 player - Eclipse 6 inch Component splits - eclipse 6x9"s - Kenwood 4ch amp - 2x Eclipse 12 inch subs - 7" Dash screen (removed) - SAAS pedals - RX7 steering wheel - Polished Gauge Rings - Polished Lantis Sills - indaglow gauges (voltage, oil pressure, and Air Fuel ratio, boost) Other: - Remote central locking - Center console cupholders [COLOR="Orange"][SIZE="4"]Future:- Old Engine - Custom CAI (POO) - K&N Panel Filter - 2.25" Cat back > Straight through > Twin tip sexy muffler :D - Polished cam cover and exhaust shield - Replace dump tip with small twin tips I thought I should write up a project thread now seeing as I now am a part of the Mazda family again. So I am the now proud owner of a ba sedan that I bought off “Austdave” about two weeks ago. Since buying it I also got some spares with it too including a nice low km motor, so the first thing on my list was to swap out the old motor for the low km one. Well after 5 days of working on it, multiple cuts and scars but it’s now running much better than the old engine, which had a little valve stem seal issue. Before putting the engine in I stripped it down (it was already half way stripped already) to just the block and head and replaced all the seals i.e., cam shaft seals, crack seal, intake, exhaust, dizzy ring, the water pump was replaced, new thermostat, new rear main oil seal, new timing belt and tensioner’s. The only thing I didn’t swap was the head gasket. http://i1174.photobucket.com/albums/...a%20ha/529.jpg http://i1174.photobucket.com/albums/...a%20ha/528.jpg http://i1174.photobucket.com/albums/...a%20ha/527.jpg http://i1174.photobucket.com/albums/...a%20ha/517.jpg http://i1174.photobucket.com/albums/...a%20ha/516.jpg http://i1174.photobucket.com/albums/...a%20ha/515.jpg can anyone see what i did here??? lucky i had a spare ;) http://i1174.photobucket.com/albums/...a%20ha/510.jpg http://i1174.photobucket.com/albums/...a%20ha/509.jpg http://i1174.photobucket.com/albums/...a%20ha/508.jpg http://i1174.photobucket.com/albums/...a%20ha/507.jpg http://i1174.photobucket.com/albums/...a%20ha/506.jpg Here’s were I’m at so far with the build, there was a little issue with the rear muffler that somehow got a massive hole in it after Dave touch the car hoist lol ;) but it’s ok as I didn’t like the light truck muffler anyway and was going to replace it with a new twin tip muffler. I had some issues with a rattle gun as well, itself combusted in my hands when I was trying to remove the rear wheels off the car :o ow well http://i1174.photobucket.com/albums/...a%20ha/519.jpg As you can see here the original after market muffler was made pretty averagely with this nice chunk of metal in the way. The air grinder and air dermal too quick care of that http://i1174.photobucket.com/albums/...a%20ha/543.jpg http://i1174.photobucket.com/albums/...a%20ha/544.jpg Due to the rear muffler being broken I removed and the exhaust flange off it to use on the new muffler. http://i1174.photobucket.com/albums/...a%20ha/540.jpg and this is the first start of the engine after i got the timing right http://i1174.photobucket.com/albums/...0ha/th_530.jpg |
Hey mate, where did you have access to those tools! Did you hire it or is it at a friends place. Uber keen once I start doing my engine swaps.
|
Quote:
|
I found a set of shifter linkage bushes that I bought for my old Mazda but never got around to installing along with my old short shifter so I thought why not, and put those suckers in :)
As you can see i have heaps of clearance between the exhaust and the short shifter. I thought this was going to be an issue as it has been in the past, but due to the exhaust hanging just that little bit lower its a perfect fit :) http://i1174.photobucket.com/albums/...a%20ha/531.jpg http://i1174.photobucket.com/albums/...a%20ha/538.jpg http://i1174.photobucket.com/albums/...a%20ha/537.jpg http://i1174.photobucket.com/albums/...a%20ha/535.jpg http://i1174.photobucket.com/albums/...a%20ha/534.jpg The best job of all was the rear engine mount... even with the engine out it was a pig to remove. I had to drop the sub frame, steering rack, and bend a 17mm opened spanner to get the angle right to undo the nuts. Don’t know how people do it with the engine still it :eek: http://i1174.photobucket.com/albums/...a%20ha/518.jpg Along with all the spare parts I also scored a set of japspec front and rear bumpers which will be painted to suit the car when I get back from the UK in may :) |
holly crap its not red or blue lol!! looks good, so when is the maiden voyage??
|
Quote:
|
Going v6 brakes? And you should bring it on Saturday for us to inspect your dodgy work :p
|
Quote:
|
Did you have solid or HLA lifters?
|
Quote:
And white thunder? Duddddeeee. That sounds like a porn name :p |
Well he couldn't go with White Lightning as people would think he loves Grease.
|
White chunder???
|
You really need an exhaust like my V6 if you're going to call it thunder :D
|
Quote:
|
so the car is now working and is sitting a my house awaiting a good clean :) here is what i got done last night.
i recieved my new exhaust to replace the one that self combusted (or thats what dave told me lol) yesterday :) so after some carefull fiddeling i installed her and i think it turned out 10x better than i imagined :) http://i1174.photobucket.com/albums/...a/IMG_9865.jpg the old light truck muffler that was on the car http://i1174.photobucket.com/albums/...a/IMG_5422.jpg http://i1174.photobucket.com/albums/...a/IMG_4490.jpg http://i1174.photobucket.com/albums/...a/IMG_2026.jpg now what does everyone think????? look ok?? http://i1174.photobucket.com/albums/...a/IMG_1581.jpg i also ot the timing done at 7 degrees advanced, installed my HU quickly as i needed TUNES for the 60km drive home, and put the new tires on the front. :) over all im one happy camper :) |
What is it set at Matt? 7 or 7 over the stock 10?
|
Quote:
|
Why so low? On the bonnet it will tell you stock timing, I've got mine around 11 degrees i think?
|
Quote:
|
Quote:
|
All times are GMT +10. The time now is 09:08 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT