Sp20 ECU flash
 

Hi guys. I can't remember where, but I recall something saying that the BJ 323 ECU can't be re-flashed. Is this true?

I think I'm up to that stage in my build to do something with the computer side of it now

Sub'd. Very interested to know too.

Found a company in Singapore, PowerChip, that has this...

http://www.powerchipgroup.com/datasheets/5/MAZ0058.pdf

Not sure if still available. Might contact them for more info.
Note, not sure if Singapore got the 'Ford' ECU or Australian 'Mazda' ECU.

Edit: Found contact info for PowerChip based in VIC Australia..

http://www.powerchipgroup.com/interact/contact.asp

Price: $990.00plus postage.

Powerchip? Don't walk away, run away.

Google 'Powerchip' and get some popcorn out.

Yep... Noted. Running away.




So... SP20 ECU flash?

Oldish post but heres my 2c.

you cant get the ecu reflashed but can wire up piggy back ecu's. In term's of performance, you would definitely need to have intake/header/exhaust mod before you decide to get the tuning done.

With respect to the powerchip, I think its more of a fuel controller. I vaguely recall having a look at the ecu and it just tricks the fuelling based on crank/cam sensors. I'd recommend the E manage ultimate as I've wired up two so far and it controls +/- fuel and ignition timing. In terms of performance you get quicker response and better fuel economy. Also the redline can be increased. The mazda engines arent renoun for top end power mainly focusing on bottom end and mid range. To compensate, I have offset the cams on an SP20 which shifts the powerband from 1-4.5k to 5-7k rpm.

you can not Flash the ECU

Adaptronic has a Plug in ECU for the BJ series 323's

I know I'm a few years late but would an adaptronic ecu work with a 1.8 fp?

Toasty, yes they do.

I have one in mine. Works perfectly.

I just seen you were from wollongong also, where abouts, and what colour is your 323 ??