[JDM] Mazdaspeed Gearknobs & Handbrakes
 

MS gearknobs. See below for SAMPLE PICS

http://rupewrecht.com/forsale/fs_ms_...b_cflookx2.jpg
http://rupewrecht.com/forsale/fs_ms_...ob_leather.jpg
http://rupewrecht.com/forsale/fs_ms_...alushortx2.jpg
http://rupewrecht.com/forsale/fs_ms_..._mttapered.jpg
http://rupewrecht.com/forsale/fs_ms_...andmagenta.jpg
http://rupewrecht.com/forsale/fs_ms_..._rubberrx8.jpg
http://rupewrecht.com/forsale/fs_ms_gearknobround.jpg
http://rupewrecht.com/forsale/fs_ms_gearknob_wood.jpg

Various types and finishes:
- Simulated Woodgrain,
- Carbon Fibre-look
- Leather/Perforated Leather
- Aluminium/Carbon Fibre (real) in a few sizes.

All knobs are screw on using the standard Mazda M10x1.25 thread - no grub screws!
Gearknobs weight from 200g to 500g depending on style.

The trouble is that you can't buy either those knobs or handbrakes new anymore, as all the older MS stuff has been discontinued - so they're only going to get more expensive.

There is a specific spacer plug thing that Mazdaspeed sell to keep the leather boot up, as per below pic

http://rupewrecht.com/astina/interio...uned_badge.jpg

They're just very rare.

Any gear knobs available (preferably CF MS)?

How do the handbrake covers fit on?

if its the same as my sisters car then you slide the stocko rubber cover off and these slide over and then scew on. (i could be completely wrong as hers was an old civic ahaha)

I've got an RX8 rubber one and a CF/Aluminium (2nd pic at top) one arriving in the next few containers. And i've added some CF-Look ones below. They generally sell for around 5000yen

Force! ;) The metal of the handbrake frame holds them tight on, as the frame gets fatter closer to the base. You need a bit of muscle to get them on.

The leather one i put on mine recently is held on the same way, and I'd need to use a rubber to remove it.

What i've got in stock:

Handbrakes:

http://rupewrecht.com/forsale/fs_ms_cfhandbrakes.jpg

http://rupewrecht.com/forsale/fs_ms_cfhandbrake_mx5.jpg


Gearknobs:

http://rupewrecht.com/forsale/fs_ms_...tgearknobs.jpg

http://rupewrecht.com/forsale/fs_ms_gearknobsCFWood.jpg

Click here for more info: http://www.astinagt.com/forums/showthread.php?t=10668

Do they come in 6 speed configuration?

None of them do specifically, but there is a few of the newer ones that don't have a shift pattern on the top so can be used with a 6 speed - they just have 'Mazdaspeed' across the top instead

Any mazdaspeed automatic shifter's with matching Handbrake handle?

Automatic Mazdaspeed handles don't exist. Mazdaspeed ones for the JDM Tiptronic shifters do, and they're a narrower thread than the regular Mazda manual shifter thread size.

bugger.. thanks Rupe

would you have any gear knobs in stock for the FD? Thanks.

Sure do, have a look at the top of this post:
http://www.astinagt.com/forums/showp...42&postcount=2

Late-era handbrake

http://page14.auctions.yahoo.co.jp/j...ion/s322446835

http://auctions.c.yimg.jp/f17batchim...3030200108.jpg

79¥/$1, 4 days. BIN of 39900¥

How much do you think that will go for Dan?

Already sold - someone used the Buy It Now! Not too surprising though for this style.

holy crap!

It's ostensibly for FD - and FD stuff has been going for stupid prices lately