AstinaGT Forums - View Single Post

BigMal · 27-10-2003, 09:13 PM

Obzelite,
That solenoid on the AFM is for the factory boost switch for
low boost under 5500 and up to 11psi after 5500. Most people
with GTX/TX3's bypass it I know with my setup its not connected
at all and is all ok. Only other wiring thing is the Pin M which needs
to be cut otherwise the motor wont rev passed 5500.

regards

Mal

27-10-2003, 09:13 PM	#11
BigMal 1ST BA TURBO MEMBER Join Date: Mar 2002 Location: Sydney Car: BA Astina Turbo Posts: 4,195	Obzelite, That solenoid on the AFM is for the factory boost switch for low boost under 5500 and up to 11psi after 5500. Most people with GTX/TX3's bypass it I know with my setup its not connected at all and is all ok. Only other wiring thing is the Pin M which needs to be cut otherwise the motor wont rev passed 5500. regards Mal __________________ If you want wind in your hair add a Hairdryer !!!