|
1. Reduce total toe-in to the following specification.
o Front total toe-in (-1.0 +1.0 mm, -0.04 + 0.04 in, -0°6' + 6')
o Rear total toe-in (-1.0 +1.0 mm, -0.04 + 0.04 in, -0°6' + 6')
I guess it is how you read it also though. Toe in would be +X.X, but the specs show to out ie -X.X. It also says to reduce toe in by the follow specs. So it that whatever spec it came from the factory, then remove 1mm? Is it 1mm total, ie 0.5mm each side?
What are the normal BJ specs? +0.7mm per side on front, +0.2mm per side on rear?
|