View Single Post
Old 28-09-2007, 01:21 PM   #12
DavoAust
Senior Member
 
DavoAust's Avatar
 
Join Date: Mar 2007
Location: Brisbane
Car: Red '93 3000GT / Black '08 Ninja 250R
Posts: 2,930
Send a message via MSN to DavoAust
dunno what department the bracket things were in. but they were with the hinges and latches if that helps. they are a strip of galvanized metal with notches and pre drilled holes. you can bend them in a vice and cut them with a hack saw. its perfect for making a bracket to attach to the bolt from the resonator.

the piping i got from supercheap was $30 so expensive but its that expandable stuff so you can route if around corners and it'll hold its shape. its like asangag's red one but you don't need the pvc corners to hold it there, it'll do it itself (has metal ribbing). if you're gonna spend more than $40 on the piping just got to super cheap and get the stuff. you just need the pipe and the reducer
__________________
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you.

'97 1.8L Hardtop
'93 3.0L TT 3000GT
DavoAust is offline   Reply With Quote