|
21-11-2011, 04:02 PM | #1 |
Junior Member
Join Date: Nov 2011
Location: Wellington, New Zealand
Car: Ford Laser tx3i 1991
Posts: 13
|
Blodgertrons bg tx3
Just got me a new tx3. Has no motor though.
Will post proper pics when it arrives Last edited by blodgertron; 21-11-2011 at 09:01 PM. |
Sponsored Links |
24-11-2011, 05:38 PM | #2 |
AstinaGT Regular
Join Date: Sep 2008
Location: New Zealand
Car: 1989 Astina GLX
Posts: 288
|
ah you get back to your amazd forum haha
so whats the haps with this one and is this the project now?
__________________
crazy ant |
26-11-2011, 07:11 PM | #3 |
Junior Member
Join Date: Nov 2011
Location: Wellington, New Zealand
Car: Ford Laser tx3i 1991
Posts: 13
|
Yup red ones the new project
Slowly been cleaning nearly 500k worth of dirt and grime from the engine bay and finally got an engine to fill the hole with fe3....... Shouldnt be too long till its in
__________________
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement - Henry Ford |
16-12-2011, 08:45 PM | #4 |
Junior Member
Join Date: Nov 2011
Location: Wellington, New Zealand
Car: Ford Laser tx3i 1991
Posts: 13
|
Motor is now in
__________________
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement - Henry Ford |
17-12-2011, 12:20 AM | #5 |
Senior Member
Join Date: May 2005
Location: Sydney Lakemba
Car: mx-6 626 Gs300 Maz2 was 95 KF BA-HT
Posts: 2,024
|
is that a local or import FE DOHC. ? Clearly a early model with the 2.0L injection label. but ? what cams are inside
|
17-12-2011, 03:13 PM | #6 |
Junior Member
Join Date: Nov 2011
Location: Wellington, New Zealand
Car: Ford Laser tx3i 1991
Posts: 13
|
Its a local one out of a tx5
Has fe5a cams. Not sure what compression it is
__________________
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement - Henry Ford |
08-01-2012, 08:14 PM | #7 |
Junior Member
Join Date: Jul 2009
Location: New Zealand
Car: Mazda 323
Posts: 238
|
just looking at it, it will be High comp if it had no cat mine is the same NZ new tho
__________________
FE3 POWER
1985 Mazda 323 BF5P - FE3T powered 1988 Mazda Familia BFMP XG-I FE3 Powered |
26-01-2012, 11:06 PM | #8 |
Junior Member
Join Date: Nov 2011
Location: Wellington, New Zealand
Car: Ford Laser tx3i 1991
Posts: 13
|
Welll my other tx3 finally broke so ive got my ass into action and started working onthe red car again
Started stripping and labeling the loom off it All nicely stripped and labled and just to top it off my strut brace wont fit anymore... red tx3 as it sits now
__________________
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement - Henry Ford |
12-02-2012, 12:36 PM | #9 |
Junior Member
Join Date: Nov 2011
Location: Wellington, New Zealand
Car: Ford Laser tx3i 1991
Posts: 13
|
upgrades
So close to getting it going now. just driveshafts and a few other bits and pieces left to do
__________________
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement - Henry Ford |
|
|