FS: B3M Exedy Deal Struck!

twilightprotege · 06-03-2007, 03:16 PM

B3Motorsports has recently taken exedy on board as a supplier. Prices will be up on the website shortly, but here are some ones relative to us to get the ball rolling...

BJ 1.6L & 1.8L and BG 1.8L SOHC
Heavy Duty - $275
Button - $340
Cushion Button - $615

BJ 2L
Heavy Duty - $355
Button - $445

BA V6
Cushion Button - $525

BA 1.8L, BH 1.6L and Mazda 2 (same as late model BA prices)
Heavy Duty - $295 (225mm - early) or $255 (200mm - late)
Button - (200mm only) - $435
Cushion Button - (200mm only) - $505

BG 1.8L DOHC
Heavy Duty - $245
Button - $295
Cushion Button - $515

any other requests for prices let us know.

driver101 · 06-03-2007, 05:05 PM

How much for a GMK7495 shipped to 3150?

goodfella · 06-03-2007, 07:15 PM

i have a badly slipping clutch, so timing is good, i might take you up... . i havea '97 [late ba] asty....just gotta get the car back from repairs after its drivers door was kissed by a ute...
whats your lead time on supply... and what do u charge for delivery.

323_mazdabator · 06-03-2007, 10:04 PM

hey i'm guesing these prices are for the clutch plate only? no pressure plate? can you get pressure plates aswell? prices?

boostedbatman · 07-03-2007, 06:13 AM

Prices are for clutch plate and pressure plate
Come a a set from Exedy

twilightprotege · 07-03-2007, 09:51 AM

driver - geting a price now.

goodfella - depends on the version you're after. just a HD or more? and i assume you're 1.8L too?

timmy - full kit yo!

goodfella · 07-03-2007, 10:03 AM

Twilight,
yes I have a 1.8, it the last version of the BA model, so it has the F series, 200mm clutch. Does the kit also include Spiggot and thrust bearings?At this stage that is all, so can u work out a price for delivery to postcode 2046, Five Dock, Syd.
Thanks

chicaboo · 07-03-2007, 10:30 AM

HD kits include the thrust bearing, but not the spiggot bearing. Dunno about the higher spec kits.

Gav.

twilightprotege · 07-03-2007, 11:28 AM

all kits should include everything (thrust bearng and spiggot)

goodfella - post will be $20 (registered of course). lead time - we'll be placing an order by the end of the week (we're trying to get them to make a cushion button clutch kit available for the BJ SP20 - they have never been made before, but i gave them good info on how to put a kit together using other bits). you'd think most if not all clutches would be in stock at any given point in time

chicaboo · 07-03-2007, 11:37 AM

Quote:

Originally Posted by twilightprotege

all kits should include everything (thrust bearng and spiggot)

Yes, they should include everything hey...

bourbon · 07-03-2007, 11:37 AM

Quote:

Originally Posted by twilightprotege

should

can you confirm this please?

Astro Boy · 07-03-2007, 11:43 AM

They shouldn't include spigot...

chicaboo · 07-03-2007, 12:00 PM

Quote:

Originally Posted by Astro Boy

They shouldn't include spigot...

Well I know they don't in the HD kit...

twilightprotege · 07-03-2007, 12:09 PM

just confirmed - no spiggot in the kit

goodfella · 07-03-2007, 12:21 PM

No probs, I'm in ... If you can supply the spiggot bearing anyway, that would be gr8, just let me know what i owe you ..

i'll pm u my details.

chipa · 07-03-2007, 02:31 PM

Just checking it out (and yes I know I don't need one) but the Exedy online catalog doesn't list a button clutch for the BJ 2.0L. Whats the go there?

http://www.exedy.com.au/catalogue-de...sp?id=38999298

twilightprotege · 07-03-2007, 02:35 PM

yeah it doesnt list one, but it is available.

the cushion is definately not available, but we're working on that (should be a B3M only deal - ie they wont sell it as a kit)

chicaboo · 07-03-2007, 03:25 PM

Meaning Exedy just take a 225mm clutch plate from another kit with the same tolerances. ie: Probably the same as most other G series gearboxes that don't use the 215 or 235mm...

323_mazdabator · 07-03-2007, 06:47 PM

so andy do you know the clamping force on the hd clutch? can you get a clutch kit to suit the familia flywheel? $$$?

driver101 · 08-03-2007, 12:31 AM

Quote:

Originally Posted by twilightprotege

driver - geting a price now.

Any luck?

06-03-2007, 03:16 PM	#1
twilightprotege Driving a faster car now! Join Date: Oct 2003 Location: Work, always at bloody work... Car: Lotus ....... . Posts: 5,217 View Photos By: twilightprotege	FS: B3M Exedy Deal Struck! B3Motorsports has recently taken exedy on board as a supplier. Prices will be up on the website shortly, but here are some ones relative to us to get the ball rolling... BJ 1.6L & 1.8L and BG 1.8L SOHC Heavy Duty - $275 Button - $340 Cushion Button - $615 BJ 2L Heavy Duty - $355 Button - $445 BA V6 Cushion Button - $525 BA 1.8L, BH 1.6L and Mazda 2 (same as late model BA prices) Heavy Duty - $295 (225mm - early) or $255 (200mm - late) Button - (200mm only) - $435 Cushion Button - (200mm only) - $505 BG 1.8L DOHC Heavy Duty - $245 Button - $295 Cushion Button - $515 any other requests for prices let us know.

06-03-2007, 05:05 PM	#2
driver101 Junior Member Join Date: Feb 2004 Posts: 13	How much for a GMK7495 shipped to 3150? Last edited by driver101; 06-03-2007 at 05:08 PM.

06-03-2007, 07:15 PM	#3
goodfella Junior Member Join Date: Jun 2006 Location: Sydney Car: BA ASTINA hardtop Posts: 44 View Photos By: goodfella	i have a badly slipping clutch, so timing is good, i might take you up... . i havea '97 [late ba] asty....just gotta get the car back from repairs after its drivers door was kissed by a ute... whats your lead time on supply... and what do u charge for delivery. Last edited by goodfella; 06-03-2007 at 07:19 PM.

06-03-2007, 10:04 PM	#4
323_mazdabator Junior Member Join Date: Aug 2004 Location: Brisbane nth side Car: 1990 BG astina Posts: 97	hey i'm guesing these prices are for the clutch plate only? no pressure plate? can you get pressure plates aswell? prices? __________________ lowered on king spring superlows (50mm), k&n air filter, 17" wheels, sports exhaust and induction.

07-03-2007, 06:13 AM	#5
boostedbatman Manpink Crusader Join Date: Jun 2004 Location: Stafford, Brisbane Car: 1990 GD mx6 F2T, and soon I might drive the batmoobile once again Posts: 2,280 View Photos By: boostedbatman	Prices are for clutch plate and pressure plate Come a a set from Exedy __________________ The Batmobile as she used to be and now she hangs from a chain in the garage

07-03-2007, 09:51 AM	#6
twilightprotege Driving a faster car now! Join Date: Oct 2003 Location: Work, always at bloody work... Car: Lotus ....... . Posts: 5,217 View Photos By: twilightprotege	driver - geting a price now. goodfella - depends on the version you're after. just a HD or more? and i assume you're 1.8L too? timmy - full kit yo!

07-03-2007, 10:03 AM	#7
goodfella Junior Member Join Date: Jun 2006 Location: Sydney Car: BA ASTINA hardtop Posts: 44 View Photos By: goodfella	Twilight, yes I have a 1.8, it the last version of the BA model, so it has the F series, 200mm clutch. Does the kit also include Spiggot and thrust bearings?At this stage that is all, so can u work out a price for delivery to postcode 2046, Five Dock, Syd. Thanks Last edited by goodfella; 07-03-2007 at 10:16 AM.

07-03-2007, 10:30 AM	#8
chicaboo Senior Member Join Date: Sep 2004 Location: Logan prefecture Car: Touge monster Posts: 7,585	HD kits include the thrust bearing, but not the spiggot bearing. Dunno about the higher spec kits. Gav.

07-03-2007, 11:28 AM	#9
twilightprotege Driving a faster car now! Join Date: Oct 2003 Location: Work, always at bloody work... Car: Lotus ....... . Posts: 5,217 View Photos By: twilightprotege	all kits should include everything (thrust bearng and spiggot) goodfella - post will be $20 (registered of course). lead time - we'll be placing an order by the end of the week (we're trying to get them to make a cushion button clutch kit available for the BJ SP20 - they have never been made before, but i gave them good info on how to put a kit together using other bits). you'd think most if not all clutches would be in stock at any given point in time

07-03-2007, 11:43 AM	#12
Astro Boy GSL RallySport Join Date: Mar 2004 Location: Brendale QLD!!! Car: Cross 6 Posts: 1,835	They shouldn't include spigot... __________________ - GSL RallySport - Ph: 1300 884 836 - Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear? - QFM Performance Brake Pads - Also specialising in - DMS High Performance Shock Absorbers - Monit Rally Computers -

07-03-2007, 12:09 PM	#14
twilightprotege Driving a faster car now! Join Date: Oct 2003 Location: Work, always at bloody work... Car: Lotus ....... . Posts: 5,217 View Photos By: twilightprotege	just confirmed - no spiggot in the kit

07-03-2007, 12:21 PM	#15
goodfella Junior Member Join Date: Jun 2006 Location: Sydney Car: BA ASTINA hardtop Posts: 44 View Photos By: goodfella	No probs, I'm in ... If you can supply the spiggot bearing anyway, that would be gr8, just let me know what i owe you .. i'll pm u my details.

07-03-2007, 02:31 PM	#16
chipa Crazy Member Join Date: Nov 2003 Location: Sydney Car: FPV F6 Typhoon Posts: 1,372 View Photos By: chipa	Just checking it out (and yes I know I don't need one) but the Exedy online catalog doesn't list a button clutch for the BJ 2.0L. Whats the go there? http://www.exedy.com.au/catalogue-de...sp?id=38999298 __________________ King Spring Lows, TWM short shifter, split eardrums, blah blah blah and a little voice saying "I wish I had a turbo" Updated 2007-03-19: Readers Rides Finally upgraded from the stock headunit

07-03-2007, 02:35 PM	#17
twilightprotege Driving a faster car now! Join Date: Oct 2003 Location: Work, always at bloody work... Car: Lotus ....... . Posts: 5,217 View Photos By: twilightprotege	yeah it doesnt list one, but it is available. the cushion is definately not available, but we're working on that (should be a B3M only deal - ie they wont sell it as a kit)

07-03-2007, 03:25 PM	#18
chicaboo Senior Member Join Date: Sep 2004 Location: Logan prefecture Car: Touge monster Posts: 7,585	Meaning Exedy just take a 225mm clutch plate from another kit with the same tolerances. ie: Probably the same as most other G series gearboxes that don't use the 215 or 235mm...

07-03-2007, 06:47 PM	#19
323_mazdabator Junior Member Join Date: Aug 2004 Location: Brisbane nth side Car: 1990 BG astina Posts: 97	so andy do you know the clamping force on the hd clutch? can you get a clutch kit to suit the familia flywheel? $$$? __________________ lowered on king spring superlows (50mm), k&n air filter, 17" wheels, sports exhaust and induction.