Ecotek CB-26P - Page 2

ezin · 02-08-2003, 06:48 PM

MMM! The product should do well if marketed properly! + it would need to be cheap! Cause it doesnt provide much power, it just smooths out power deliverly! Not up for the additional sound though! Whatz the going price! i will keep one eye open on this product! :wink:

Cosmo Dude · 02-08-2003, 06:54 PM

Quote:

Originally Posted by globalautomotive

ECU adaptation.
A closed loop system will not compensate for this air altering product. Idle is where an ECU takes it's reading and makes its adjustments. At idle this product is not operating.

Regards,
Adam

Closed loop takes its readings all the time and updates continuasly. As you know the O2 sensor is not up to temp at idle.

I don't have enough info to evaluate this product, it is obvious you don't sell it

Rod

ezin · 02-08-2003, 06:57 PM

Yes i agree with that aswell Rod!!

I would like 2 see test results! :?:

brc · 07-09-2006, 01:42 AM

Howzit everyone,

I stumbled onto this thread by mistake. Let me introduce myself: My name is Bryan and I run BRC Developments and I import the Ecotek valves and other products directly from Ecotek under sole agency.

The products do work very well. On a dyno you won't see any differences in the car as there is no vacuum in the manifold under wide open throttle. In terms of performance, the valve can reduce your 0-100 time by up to a second simply by increasing your throttle response.

Our website will be up shortly and it will be www.ecotek.co.za We will also have an online shop for it. Our products are also advertised on www.maxmyride.co.za.

The valve is currently on special for R700 inclding VAT and postage if necessary. At the end of September they will go back to the normal price of R970.00 We also have the Piper-X filters for them at R300. They are easy to fit and we will help out wherever possible.

You can email me directly on bryan@ecotek.co.za

02-08-2003, 06:48 PM	#21
ezin AstinaGT Regular Join Date: Jul 2003 Location: melb Posts: 416 View Photos By: ezin	MMM! The product should do well if marketed properly! + it would need to be cheap! Cause it doesnt provide much power, it just smooths out power deliverly! Not up for the additional sound though! Whatz the going price! i will keep one eye open on this product! :wink:

02-08-2003, 06:57 PM	#23
ezin AstinaGT Regular Join Date: Jul 2003 Location: melb Posts: 416 View Photos By: ezin	Yes i agree with that aswell Rod!! I would like 2 see test results! :?:

07-09-2006, 01:42 AM	#24
brc Junior Member Join Date: Sep 2006 Posts: 1	Howzit everyone, I stumbled onto this thread by mistake. Let me introduce myself: My name is Bryan and I run BRC Developments and I import the Ecotek valves and other products directly from Ecotek under sole agency. The products do work very well. On a dyno you won't see any differences in the car as there is no vacuum in the manifold under wide open throttle. In terms of performance, the valve can reduce your 0-100 time by up to a second simply by increasing your throttle response. Our website will be up shortly and it will be www.ecotek.co.za We will also have an online shop for it. Our products are also advertised on www.maxmyride.co.za. The valve is currently on special for R700 inclding VAT and postage if necessary. At the end of September they will go back to the normal price of R970.00 We also have the Piper-X filters for them at R300. They are easy to fit and we will help out wherever possible. You can email me directly on bryan@ecotek.co.za