|
18-09-2006, 04:51 AM | #1 |
Junior Member
Join Date: Jul 2006
Location: Dk
Car: 323F KLZE
Posts: 62
|
I need pic of fuel preassure regulator and where the vacum lines go.
I need pic of fuel preassure regulator and where the vacum lines go... I need this BAD.....(v6 engine)
thank you |
Sponsored Links |
18-09-2006, 07:37 AM | #2 |
Senior Member
Join Date: Mar 2002
Location: Melb, Aus
Car: Mazda 323 BA BPT transplant
Posts: 3,459
|
you'll be fine with any vacuum line from the plenum.
From the factory, it probably uses solenoid inline, which allows the computer to refine the pressure a bit - but its not needed. |
18-09-2006, 02:06 PM | #3 |
Senior Member
|
Does this help at all?
I am unsure if this will help you or not....
download the 01-14 bit and have a look. http://protege5.ugly.net/ J |
18-09-2006, 02:51 PM | #4 |
Crazy Member
|
That unfortunately is the online manual for the US BJ model.
__________________
King Spring Lows, TWM short shifter, split eardrums, blah blah blah and a little voice saying "I wish I had a turbo" Updated 2007-03-19: Readers Rides Finally upgraded from the stock headunit |
18-09-2006, 03:15 PM | #5 |
Manpink Crusader
Join Date: Jun 2004
Location: Stafford, Brisbane
Car: 1990 GD mx6 F2T, and soon I might drive the batmoobile once again
Posts: 2,280
|
I dont understand what you want pics for
Your regulator goes to the stock location (you will need an adapter) and then you have fuel line out and the vacuum line goes to the front right intake manifold runner at the bottom and thats it Different if you wish to do a dual feed setup then you will need to shop for lots more bits and lots more hose |
18-09-2006, 07:55 PM | #6 |
Junior Member
Join Date: Jul 2006
Location: Dk
Car: 323F KLZE
Posts: 62
|
emh I made vacuum after 2.5 diagram and now I don't know where they go anymore..
Pictures tell allot.. And it's easier.. |
|
|