Cannons mufflers, tips - For sale, new

sik astina · 16-04-2003, 06:01 PM

[color=#0000FF

ost_uid2]Aright guys, girls.

at the rotary shop these mufflers and tips aint doing any good on the display shelf.

there all new. never been fitted.

$270 for the cannons muffler each..

tips havnt been priced yet. can get all sorts too.

these are Made by 3ARacing.

im from Wollongong as most of u's already know.

Cannons and tips pics

-Mick[/color

ost_uid2]

SehnKhan · 16-04-2003, 07:32 PM

[color=#000000

ost_uid0]The 3ARacing muffler pictured in cannon_1.jpg is the one I have. Not a bad item.
Just a note - I paid quite a bit more for the muffler then what Mick has quoted, and I am very impressed with the quality.[/color

ost_uid0]

Dogo · 17-04-2003, 09:34 AM

[color=#000000

ost_uid0]sik, do u know how much it would be to ship to Melb ?

and if there are any problems fitting these to the astina ?[/color

ost_uid0]

sik astina · 17-04-2003, 10:10 AM

[color=#0000FF

ost_uid0]Dont know how much it will be to send. u might have to find that out... I couldnt put one on coz i wanted it Fully sideways (Ezzystyle) coz of the spare tyre comes down to low it will sit very low to the floor. but if u put it like theos shouldnt be a prob.

theos

will let u know today *

if it will fit

-Mick[/color

ost_uid0]

Provo · 17-04-2003, 10:24 AM

[color=#000000

ost_uid0]Hey Sik...installed for $295 hey?
What size are they? Def interested!By any chance do you guys do springs as well? Cause i'd like to get them both done at the same time...

Cheers,
Joe[/color

ost_uid0]

mrpayner · 17-04-2003, 10:37 AM

[color=#000000

ost_uid0][quote

ost_uid0="sik astina"]but if u put it like theos shouldnt be a prob.[/quote

ost_uid0]
Cool! I was going to ask if it's any problem to whack the exhaust onto the other side....

Theo, was there much fiddling to get it to fit?? [ie the pipe leading into the muffler itself]. *

One other thing i want to know, how loud is it?? I want one that is extremely quite [ie can't hear it inside] as I hate the droning noise of exhausts like this. I'm assuming that you can get "silencers" [if you want to call them that] that you can put into these mufflers to reduce noise... And you guys have also mentioned a thing called a "hotdog", as i understand it this device takes out the high pitched "raspy" noise created by the Astina setup when you fit an exhaust such as this, am I right??

Adam[/color

ost_uid0]

kyra · 17-04-2003, 02:15 PM

[color=#000000

ost_uid0]great mufflers guys... i had one on my rolla sx... twin 3.5" DTM style tips...f'n loud!!! i actually got it cost price from autobarn $190 (chick who worked there was fond of me!)...
only problem was the size of the muffler, too long!! tips stuck out too far... hopefully they have fixed this problem.

top value for the mufflers though!![/color

ost_uid0]

Toyboy · 17-04-2003, 04:07 PM

[color=#000000

ost_uid0]Yeah mine was very fiddly to get under there,the exhaust shop had to weld a few bits of angled pipe together to get it to mate up to the muffler cause of how tight a fit it was :O
My pipe work hits the camber rod(if thats what you call it) on big bumps

*I had to also get the smallest cannon muffler made by turbosmart to make it fit

Here is a close up :

:
http://www.fordlaser.com/showpic.php?image_id=478
*Catch ya[/color

ost_uid0]

sik astina · 17-04-2003, 04:55 PM

[color=#0000FF

ost_uid0]Hi Joe, yup its $295 installed. and we dont do springs. only go fast bits *:

: *turbos, etc

Dave - they said it shouldnt be a problem if u put it like how theo has it.[/color

ost_uid0]

Provo · 18-04-2003, 11:54 AM

[color=#000000

ost_uid0]Well we've actually got a cruise up there in a little while for my Uni club...so I may be up there anyways!
What size are they? Cause i'm after the ricey 4"...i just dont know if its going to be to loud....
Joe[/color

ost_uid0]

Critter · 19-04-2003, 08:52 AM

[color=#000000

ost_uid0]Like MrPayner my interest goes with "if it ain't real loud" ie not louder than what I have.....which is kinda middle-y.....

Cannons have a rep for "loud" and I have an SQ stereo to consider.[/color

ost_uid0]

BigMal · 19-04-2003, 09:39 AM

[color=#000000

ost_uid1]I thought thats what the volume control was for... To
drown out the exhaust noise !! *Your boot critter would
have sound deadening all through it wouldn't it so the
drone problems of others/me wouldn't be as much a
problem I would have thought ??

Regards

Mal[/color

ost_uid1]

Edited By BigMal on 1050709295

mrpayner · 19-04-2003, 02:03 PM

[quote

ost_uid0="BigMal"][color=#000000

ost_uid0]I thought thats what the volume control was for...[/color

ost_uid0][/quote

ost_uid0]
[color=#000000

ost_uid0]LOL, i always thought it was a funny idea to put on a loud exhaust, then have to upgrade the stereo so you couldn't hear it. Sort of defeats the purpose... :

:

Adam[/color

ost_uid0]

Provo · 19-04-2003, 06:39 PM

[color=#000000

ost_uid0]hey...Sik...what size are you offering?
Cause i'm just wondering...what are the differences between a 4" and 3" tip? Obviously the 4" will be a lot louder...but does the extra size warrent the power increase? Cause like critter (but not to the same extent), I have a SQ system to worry about...
Cheers,
Joe[/color

ost_uid0]

sik astina · 24-04-2003, 01:47 PM

Well i updated the page with the sizes on it.

http://www.geocities.com/da_sik_asti...tsforsale.html

Shouldnt be much differences between the two. what cannon muffler are you looking at provo?

-Mick

Provo · 25-04-2003, 02:09 AM

Not too much of an idea...but i'm not sure atm... I'm just looking at a change in scenery...

ops: (ie...maybe a prelude...) :?
I'll let you know either way!
Cheers,
Joe

SehnKhan · 27-04-2003, 10:23 PM

We are looking to retain and gain members, not push them away. Consider a "change of scenery" with new rims or something :P

Or, do what you feel happy with

For those who were interested in the 3A Racing mufflers and attended the Melb CAI day - you heard 2 in action (one on my Accent, and one on the SSS Pulsar <Gaz?? Or Something? I forgot>).

Dogo · 28-04-2003, 12:19 PM

Gareth.

Hey Sik, just want to confirm ...

the "2 & 1/2" inlet to a 3 & 1/2" tip" ( top right pic )
looks like it has 2 tips, is the label wrong, Or am i just seeing the picture wrong ?

i've sparked my interest in these again.

must ... save ... money ....
must ... save ... money ....

:lol:

Dogo · 28-04-2003, 12:21 PM

and can sum1 please just confirm for me ...

the v6 allready has 2.5" pipes down the car, yeh ?

16-04-2003, 06:01 PM	#1
sik astina Senior Member Join Date: Mar 2002 Location: Wollongong , N.S.W , Australia Car: Ba 1.8L Turbo astina Posts: 1,739 View Photos By: sik astina	[color=#0000FFost_uid2]Aright guys, girls. at the rotary shop these mufflers and tips aint doing any good on the display shelf. there all new. never been fitted. $270 for the cannons muffler each.. tips havnt been priced yet. can get all sorts too. these are Made by 3ARacing. im from Wollongong as most of u's already know. Cannons and tips pics -Mick[/colorost_uid2] __________________ [UNL35H] CANDY BA 1.8L Turbo - with the Twotone spread with the loco paint 2sus custom resprays

16-04-2003, 07:32 PM	#2
SehnKhan Senior Member Join Date: Jul 2002 Location: . Car: . Posts: 1,789	[color=#000000ost_uid0]The 3ARacing muffler pictured in cannon_1.jpg is the one I have. Not a bad item. Just a note - I paid quite a bit more for the muffler then what Mick has quoted, and I am very impressed with the quality.[/colorost_uid0]

17-04-2003, 09:34 AM	#3
Dogo Senior Member Join Date: Mar 2002 Location: Melb, Aus Car: Mazda 323 BA BPT transplant Posts: 3,459 View Photos By: Dogo	[color=#000000ost_uid0]sik, do u know how much it would be to ship to Melb ? and if there are any problems fitting these to the astina ?[/colorost_uid0] __________________ [ Turbo BA ] see my readers ride

17-04-2003, 10:10 AM	#4
sik astina Senior Member Join Date: Mar 2002 Location: Wollongong , N.S.W , Australia Car: Ba 1.8L Turbo astina Posts: 1,739 View Photos By: sik astina	[color=#0000FFost_uid0]Dont know how much it will be to send. u might have to find that out... I couldnt put one on coz i wanted it Fully sideways (Ezzystyle) coz of the spare tyre comes down to low it will sit very low to the floor. but if u put it like theos shouldnt be a prob. theos will let u know today * if it will fit -Mick[/colorost_uid0] __________________ [UNL35H] CANDY BA 1.8L Turbo - with the Twotone spread with the loco paint 2sus custom resprays

17-04-2003, 10:24 AM	#5
Provo Junior Member Join Date: Aug 2002 Location: Sydney Posts: 58	[color=#000000ost_uid0]Hey Sik...installed for $295 hey? What size are they? Def interested!By any chance do you guys do springs as well? Cause i'd like to get them both done at the same time... Cheers, Joe[/colorost_uid0]

17-04-2003, 10:37 AM	#6
mrpayner Senior Member Join Date: Mar 2002 Location: -37.561609, 143.854814 Car: 2013 Mazda 6 GT Sedan - Soul Red Posts: 3,517 View Photos By: mrpayner	[color=#000000ost_uid0][quoteost_uid0="sik astina"]but if u put it like theos shouldnt be a prob.[/quoteost_uid0] Cool! I was going to ask if it's any problem to whack the exhaust onto the other side.... Theo, was there much fiddling to get it to fit?? [ie the pipe leading into the muffler itself]. * One other thing i want to know, how loud is it?? I want one that is extremely quite [ie can't hear it inside] as I hate the droning noise of exhausts like this. I'm assuming that you can get "silencers" [if you want to call them that] that you can put into these mufflers to reduce noise... And you guys have also mentioned a thing called a "hotdog", as i understand it this device takes out the high pitched "raspy" noise created by the Astina setup when you fit an exhaust such as this, am I right?? Adam[/colorost_uid0] __________________ 2013 Mazda6 Diesel GT ------------------------------------------------------------------------------------------------------------------------------[Formerly] 2004 Mazda6 Luxury Sport

17-04-2003, 02:15 PM	#7
kyra AstinaGT Regular Join Date: Jul 2002 Location: East Doncaster, Victoria Posts: 485	[color=#000000ost_uid0]great mufflers guys... i had one on my rolla sx... twin 3.5" DTM style tips...f'n loud!!! i actually got it cost price from autobarn $190 (chick who worked there was fond of me!)... only problem was the size of the muffler, too long!! tips stuck out too far... hopefully they have fixed this problem. top value for the mufflers though!![/colorost_uid0] __________________ and THAT. http://www.astinagt.com/readers/ride.php?userid=kyra

17-04-2003, 04:07 PM	#8
Toyboy Senior Member Join Date: Jul 2002 Location: nsw Car: Ba Astina Posts: 1,113	[color=#000000ost_uid0]Yeah mine was very fiddly to get under there,the exhaust shop had to weld a few bits of angled pipe together to get it to mate up to the muffler cause of how tight a fit it was :O My pipe work hits the camber rod(if thats what you call it) on big bumps I had to also get the smallest cannon muffler made by turbosmart to make it fit Here is a close up :: http://www.fordlaser.com/showpic.php?image_id=478 Catch ya[/colorost_uid0] __________________ "Man who drop watch in toilet have ****ty time."

17-04-2003, 04:55 PM	#9
sik astina Senior Member Join Date: Mar 2002 Location: Wollongong , N.S.W , Australia Car: Ba 1.8L Turbo astina Posts: 1,739 View Photos By: sik astina	[color=#0000FFost_uid0]Hi Joe, yup its $295 installed. and we dont do springs. only go fast bits :: turbos, etc Dave - they said it shouldnt be a problem if u put it like how theo has it.[/colorost_uid0] __________________ [UNL35H] CANDY BA 1.8L Turbo - with the Twotone spread with the loco paint 2sus custom resprays

18-04-2003, 11:54 AM	#10
Provo Junior Member Join Date: Aug 2002 Location: Sydney Posts: 58	[color=#000000ost_uid0]Well we've actually got a cruise up there in a little while for my Uni club...so I may be up there anyways! What size are they? Cause i'm after the ricey 4"...i just dont know if its going to be to loud.... Joe[/colorost_uid0]

19-04-2003, 08:52 AM	#11
Critter Senior Member Join Date: Aug 2002 Location: Winmalee NSW Car: SP20 Posts: 690 View Photos By: Critter	[color=#000000ost_uid0]Like MrPayner my interest goes with "if it ain't real loud" ie not louder than what I have.....which is kinda middle-y..... Cannons have a rep for "loud" and I have an SQ stereo to consider.[/colorost_uid0] __________________ 2001 Astina SP20 Precision Power / Pioneer P9 sound system with Directed widescreen video Custom graphics and leather interior Adjustable lowered suspension with monster brakes

19-04-2003, 09:39 AM	#12
BigMal 1ST BA TURBO MEMBER Join Date: Mar 2002 Location: Sydney Car: BA Astina Turbo Posts: 4,195 View Photos By: BigMal	[color=#000000ost_uid1]I thought thats what the volume control was for... To drown out the exhaust noise !! *Your boot critter would have sound deadening all through it wouldn't it so the drone problems of others/me wouldn't be as much a problem I would have thought ?? Regards Mal[/colorost_uid1] Edited By BigMal on 1050709295 __________________ If you want wind in your hair add a Hairdryer !!!

19-04-2003, 02:03 PM	#13
mrpayner Senior Member Join Date: Mar 2002 Location: -37.561609, 143.854814 Car: 2013 Mazda 6 GT Sedan - Soul Red Posts: 3,517 View Photos By: mrpayner	[quoteost_uid0="BigMal"][color=#000000ost_uid0]I thought thats what the volume control was for...[/colorost_uid0][/quoteost_uid0] [color=#000000ost_uid0]LOL, i always thought it was a funny idea to put on a loud exhaust, then have to upgrade the stereo so you couldn't hear it. Sort of defeats the purpose... :: Adam[/colorost_uid0] __________________ 2013 Mazda6 Diesel GT ------------------------------------------------------------------------------------------------------------------------------[Formerly] 2004 Mazda6 Luxury Sport

19-04-2003, 06:39 PM	#14
Provo Junior Member Join Date: Aug 2002 Location: Sydney Posts: 58	[color=#000000ost_uid0]hey...Sik...what size are you offering? Cause i'm just wondering...what are the differences between a 4" and 3" tip? Obviously the 4" will be a lot louder...but does the extra size warrent the power increase? Cause like critter (but not to the same extent), I have a SQ system to worry about... Cheers, Joe[/colorost_uid0]

24-04-2003, 01:47 PM	#15
sik astina Senior Member Join Date: Mar 2002 Location: Wollongong , N.S.W , Australia Car: Ba 1.8L Turbo astina Posts: 1,739 View Photos By: sik astina	Well i updated the page with the sizes on it. http://www.geocities.com/da_sik_asti...tsforsale.html Shouldnt be much differences between the two. what cannon muffler are you looking at provo? -Mick __________________ [UNL35H] CANDY BA 1.8L Turbo - with the Twotone spread with the loco paint 2sus custom resprays

25-04-2003, 02:09 AM	#16
Provo Junior Member Join Date: Aug 2002 Location: Sydney Posts: 58	Not too much of an idea...but i'm not sure atm... I'm just looking at a change in scenery... ops: (ie...maybe a prelude...) :? I'll let you know either way! Cheers, Joe

27-04-2003, 10:23 PM	#17
SehnKhan Senior Member Join Date: Jul 2002 Location: . Car: . Posts: 1,789	We are looking to retain and gain members, not push them away. Consider a "change of scenery" with new rims or something :P Or, do what you feel happy with For those who were interested in the 3A Racing mufflers and attended the Melb CAI day - you heard 2 in action (one on my Accent, and one on the SSS Pulsar <Gaz?? Or Something? I forgot>).

28-04-2003, 12:19 PM	#18
Dogo Senior Member Join Date: Mar 2002 Location: Melb, Aus Car: Mazda 323 BA BPT transplant Posts: 3,459 View Photos By: Dogo	Gareth. Hey Sik, just want to confirm ... the "2 & 1/2" inlet to a 3 & 1/2" tip" ( top right pic ) looks like it has 2 tips, is the label wrong, Or am i just seeing the picture wrong ? i've sparked my interest in these again. must ... save ... money .... must ... save ... money .... :lol:

28-04-2003, 12:21 PM	#19
Dogo Senior Member Join Date: Mar 2002 Location: Melb, Aus Car: Mazda 323 BA BPT transplant Posts: 3,459 View Photos By: Dogo	and can sum1 please just confirm for me ... the v6 allready has 2.5" pipes down the car, yeh ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sp20 perry mufflers	mybjsp	Performance & General Maintenance	4	30-08-2006 08:28 PM
Sound Deadening Materials + Tips	MarkyMark	Audio Hi-fi	5	30-04-2004 09:11 AM