EOI [QLD] dynamat extreme bulk - Page 2

phildough · 26-07-2012, 06:39 PM

Buy too much for your car and I will steal the left overs.
I just need enough for the front doors to start off.

Rupewrecht · 26-07-2012, 07:24 PM

Tempting. How much does 35sqft do?As i want to do the doors/boot/rear wheel arches of the Slowtege.

Clean_Cookie · 26-07-2012, 07:33 PM

depends HOW you do it. if you do it like drift thorpey then you'd probably use close to a pack (boot, doors etc)

The way that I will be doing it, i still have no idea, but 100% on the roof (for max heat), some on all panels to reduce the resonace but maybe 30-50% of the panel. covering engine side of firewall completely.

I may use the full 72sq ft but I have no idea. how about I order it and sell the leftovers accordingly? Dan, its not worth shipping it to you as you can get it off ebay cheaper than paying shipping twice unfortunately...

Rupewrecht · 26-07-2012, 07:44 PM

Yea, figured that might be the case. No worries.

Clean_Cookie · 26-07-2012, 07:45 PM

I will order a large pack now and customs better not rape me this time!

Clean_Cookie · 26-07-2012, 08:12 PM

worked out to be $390 AU for two 36 ft packs and two rollers delivered. just to wait now. hopefully I can spend next weekend attacking the car

Drift Thorpey · 27-07-2012, 01:32 PM

If anyone has questions as to how much square feet or square metres will cover I can usually give you a good idea.
Like Cookie wrote, you do not need to go as obsessive as I have in my boot to make a difference. I know installers who do a layer of Extreme over the honeycomb on doors, then a whole sheet creating another inner skin to nearly completely block out road noise through doors.
I can give retail prices on any Dynamat product you are after also, including their Roller, tape (highly handy as the cut aluminium top layer can cut/rip carpet) or anything of that nature.
Subscribing to this thread now that I've found it so I'll see when anyone replies

Not trying to rain on Cookies parade, but the below link is a customer of mine who regularly stock Dynamat products (Bulk Packs in particular) and offers free freight when you order over $50
http://www.ebay.com.au/itm/Dynamat-X...item4167eb7a23

Mad Mat · 27-07-2012, 01:47 PM

dam it.. i wanted some.. where did u order it from???

Clean_Cookie · 27-07-2012, 02:22 PM

Matt, if you transfer 215 VIA paypal right now I will add yet another to the list. But it may coat more due to shipping size. So far I've got three lots. You'll only save $10, which is the petrol for you to come abs get it from me. Cheapest is Australia is from sa above.

Clean_Cookie · 27-07-2012, 02:23 PM

Asking the guys at work about buying a carton of tape. I'll update on price for that.

Mad Mat · 27-07-2012, 02:30 PM

Quote:

Originally Posted by Clean_Cookie

Asking the guys at work about buying a carton of tape. I'll update on price for that.

i can get tape for u if u need it

pm me ur paypal account. p.s. i have a amp in my car for u too...

Clean_Cookie · 14-08-2012, 02:58 PM

anyone else interested, Orion, I can get hoodliner for $100 shipped.

I will be buying another box/better roller. $210 delivered.

26-07-2012, 07:24 PM	#22
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Tempting. How much does 35sqft do?As i want to do the doors/boot/rear wheel arches of the Slowtege. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

26-07-2012, 07:33 PM	#23
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	depends HOW you do it. if you do it like drift thorpey then you'd probably use close to a pack (boot, doors etc) The way that I will be doing it, i still have no idea, but 100% on the roof (for max heat), some on all panels to reduce the resonace but maybe 30-50% of the panel. covering engine side of firewall completely. I may use the full 72sq ft but I have no idea. how about I order it and sell the leftovers accordingly? Dan, its not worth shipping it to you as you can get it off ebay cheaper than paying shipping twice unfortunately... __________________ Worklog

26-07-2012, 07:44 PM	#24
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Yea, figured that might be the case. No worries. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

26-07-2012, 07:45 PM	#25
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	I will order a large pack now and customs better not rape me this time! __________________ Worklog

26-07-2012, 08:12 PM	#26
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	worked out to be $390 AU for two 36 ft packs and two rollers delivered. just to wait now. hopefully I can spend next weekend attacking the car __________________ Worklog

26-07-2012, 06:39 PM	#21
phildough Banned Join Date: May 2006 Location: Brisneyland, Queensland Car: 2002 Mazda Frankenstina Posts: 2,868 View Photos By: phildough	Buy too much for your car and I will steal the left overs. I just need enough for the front doors to start off.

27-07-2012, 01:32 PM	#27
Drift Thorpey Junior Member Join Date: Aug 2011 Location: Radelaide's WestSide Car: 89 Astina BG DOHC Posts: 172	If anyone has questions as to how much square feet or square metres will cover I can usually give you a good idea. Like Cookie wrote, you do not need to go as obsessive as I have in my boot to make a difference. I know installers who do a layer of Extreme over the honeycomb on doors, then a whole sheet creating another inner skin to nearly completely block out road noise through doors. I can give retail prices on any Dynamat product you are after also, including their Roller, tape (highly handy as the cut aluminium top layer can cut/rip carpet) or anything of that nature. Subscribing to this thread now that I've found it so I'll see when anyone replies Not trying to rain on Cookies parade, but the below link is a customer of mine who regularly stock Dynamat products (Bulk Packs in particular) and offers free freight when you order over $50 http://www.ebay.com.au/itm/Dynamat-X...item4167eb7a23 __________________ Ashlee The White

27-07-2012, 01:47 PM	#28
Mad Mat HONEYWELL REPRESENT Join Date: Aug 2005 Location: Salisbury - Inner City Car: 1997 BA Hardtop - Had a 2003 BJii J48 Sport20, and 2x bg SOHC astina hatches Posts: 5,011 View Photos By: Mad Mat	dam it.. i wanted some.. where did u order it from??? __________________ PROJECT "Catalina" 1994 323 BG Hatch 2005-2007 Crashed into truck 1991 323 BG Hatch 2007-2008/9 SOLD 2003 BJ SP20 J48 Hatch 2008-2011 Regretfully SOLD 1997 BA I4 Sedan 2012-CURRENT 1985 BF 323 Hatch 2014-2015SOLD 1989 MX5 2015-2015

27-07-2012, 02:22 PM	#29
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	Matt, if you transfer 215 VIA paypal right now I will add yet another to the list. But it may coat more due to shipping size. So far I've got three lots. You'll only save $10, which is the petrol for you to come abs get it from me. Cheapest is Australia is from sa above. __________________ Worklog

27-07-2012, 02:23 PM	#30
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	Asking the guys at work about buying a carton of tape. I'll update on price for that. __________________ Worklog

14-08-2012, 02:58 PM	#32
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	anyone else interested, Orion, I can get hoodliner for $100 shipped. I will be buying another box/better roller. $210 delivered. __________________ Worklog

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode