Go Back   AstinaGT Forums > Performance & Technical > Performance & General Maintenance

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 25-03-2016, 09:40 AM   #38
vkrules
Junior Member
 
Join Date: Mar 2016
Location: brisbane
Car: 2003 sp-20 (safety vest yellow)
Posts: 23
Old thread I know ,but I just have to post What a nice little mod this is.
I have a 2001 laser sr with the 1.8 engine and a 2003 Mazda Sp-20.
I started with the laser, deleted the Resonator and the waffle and opened the grill panel. cut the front and sides and bent the panel down as suggested by an earlier poster, this I believe is the best way to do this mod. more on that later.
I have been working at Yatala A 30 min commute . 10 min at 60kph and a 20min run on the freeway.Right from the first trip you could tell the car was breathing better, revs rise (and fall ?) faster.Soon as I hit the freeway the engine temp drops noticeably didn't do that before! and remember i make this trip twice a day right through summer.
So summing up better engine response , runs cooler, slightly better fuel economy with a very slight increase in induction noise.
The sp-20 went with the same mods except this time drilled out in between the honeycomb grill segments only and didn't cut the panel. Real neat you can hardly notice the mod.
I've got similar results but not as noticeable . So I have to say cut the panel and bend for that ram effect.
Thanks guys for the mod

Last edited by vkrules; 25-03-2016 at 09:51 AM.
vkrules is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS : [SYD] Simota Cold Air Intake - SP20 arden For Sale/Wanted 4 15-05-2006 08:24 PM
WTB: [QLD] SP20 or Jspec Intake cam chicaboo For Sale/Wanted 3 09-12-2004 06:32 PM
dba brake rotors - sp20 twilightprotege Performance & General Maintenance 50 23-08-2004 01:38 PM
SP20 VS SP23 WASP20 General Automotive Talk 10 15-03-2004 11:38 PM
SP20 Custom Polished Cold Air Intake wiredone For Sale/Wanted 0 04-10-2003 08:35 PM


All times are GMT +10. The time now is 10:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT