mazda 323 bj 1999

harryboo · 12-03-2013, 03:02 PM

hey guys i need some help i cant get my stereo out

its a factory one

xeon8 · 12-03-2013, 05:15 PM

There are two plastic tabs on either side of the radio that just lift off. Under those tabs are two holes on each side in which you need to stick something like coathanger wire in to unclip the radio. Push the wire in until you hear a slight click, and then the radio will become loose. With the wires still pushed into the holes, the radio can then be removed.

Instead of using coathanger wire, you can use this type of tool (which is essentially bent coathanger wire anyway)

12-03-2013, 03:02 PM	#1
harryboo Junior Member Join Date: Mar 2013 Location: auckland Car: mazda Posts: 2	mazda 323 bj 1999 hey guys i need some help i cant get my stereo out its a factory one

12-03-2013, 05:15 PM	#2
xeon8 Senior Member Join Date: Dec 2011 Location: Adelaide Car: 2000 Mazda BJI Protege Posts: 878	There are two plastic tabs on either side of the radio that just lift off. Under those tabs are two holes on each side in which you need to stick something like coathanger wire in to unclip the radio. Push the wire in until you hear a slight click, and then the radio will become loose. With the wires still pushed into the holes, the radio can then be removed. Instead of using coathanger wire, you can use this type of tool (which is essentially bent coathanger wire anyway) __________________ 2010-2014: 2000 Mazda 323 Protege 2014 - 2016: 1991 Toyota MR2 SW20 2016 - Err, 2016: 2002 Mazda 323 Astina SP20 2016 - Err, uh, 2016: 1991 Mazda MX5 NA 2016 - 2017: 2000 Alfa 916 Spider 2017 - 2018: 2007 Alfa Brera 2018 - Current: 2018 Mazda 3 SP25

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode