Go Back   AstinaGT Forums > Performance & Technical > Performance & General Maintenance

Reply
 
Thread Tools Display Modes
Old 13-03-2017, 05:48 PM   #1
Pattio123
Junior Member
 
Join Date: Nov 2016
Location: Sydney
Car: Mazda Astina 1997
Posts: 3
BA Ticking Lifters

G'day, I recently did an oil change hoping to soften the noise of my ticking lifters. However, this made it kinda worse. I know it doesn't do much damage, if any, to the engine. It just drives me nuts. Also put in Liqui Moly Tappet noise stop which worked only for a few days. Should I look at getting the lifters adjusted/replaced or is there something else I could try?
Pattio123 is offline   Reply With Quote
Sponsored Links
Old 13-03-2017, 07:21 PM   #2
HMT
Junior Member
 
HMT's Avatar
 
Join Date: Apr 2004
Location: Germany
Car: '94 Astina hatch, '93 Astina, '94 NA8C Roadster
Posts: 147
Lifters can be refurbed/cleaned.
Did this with 2 sets so far. You can pull them apart, clean them out, reassemble and refill them. Better than cheapo crap quality repro parts (which can break).
__________________
HMT is offline   Reply With Quote
Old 15-03-2017, 06:14 PM   #3
Noble323
E74A
 
Noble323's Avatar
 
Join Date: Nov 2004
Location: Sydney
Car: SP20
Posts: 1,237
Sometimes (I know its not ideal) but with older engine if you use a thicker oil it helps.
What brand oil did you use ? 15/40 ? 20/50 ?
Noble323 is offline   Reply With Quote
Old 15-03-2017, 09:01 PM   #4
Cosmo Dude
コスモ
 
Cosmo Dude's Avatar
 
Join Date: Dec 2002
Location: Location: Vic
Car: Mazda '95 Astina I4, '86 B2K and '10 3 MZR-CD
Posts: 7,881
Couple of options depending on how deep your pockets are.
You could strip them out and clean them then put new cams in when reassembling.
or
Replace with Mx5 solid lifters and put in new cams
__________________
My 'stina Hatch
Cosmo Dude is offline   Reply With Quote
Old 16-03-2017, 12:48 PM   #5
project.r.racing
Senior Member
 
project.r.racing's Avatar
 
Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,920
If you have a 1997 Astina as per you profile. You have solid lifters, not HLAs. So nothing you do oil wise or cleaning will stock the ticking. You need to open up the engine and check tolerances between the camshaft and the lifter shim.
project.r.racing is offline   Reply With Quote
Old 08-08-2017, 05:12 PM   #6
Promaster
Junior Member
 
Join Date: Aug 2017
Location: Australia
Car: Mazda Astina
Posts: 6
Best option is to take out 1/4 oil from your sump and top up with a 1/4 of oil of diesel. Then start and run your engine for two minutes do not rev the engine. Then drain your oil with and replace with fresh oil and hope fully the noise should go away.
Promaster is offline   Reply With Quote
Reply

Tags
astina, bp-, lifters, tappets, ticking

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 01:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
2001- 2010 AstinaGT