|
|
Register | Readers Rides | Gallery | FAQ | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
02-03-2015, 10:13 PM | #1 |
Junior Member
Join Date: Jun 2014
Location: sydney
Car: bj astina 1.8
Posts: 14
|
track alignment spec
hey all
im heading out to wakefield again and was just wondering what ur thoughts on wheel alignment specs last time i had fronts 1.5 degree negative camber and 1mm total toe out and rears 1 degree negative camber and 0 toe, and the handling felt pretty neutral, maybe just abit understeering and turning is abit unresponsive i have now added a rear sway bar and sp20 strut brace. tyres are the same 195s hankook rs3s i was going to go for more front camber and abit more front toe out. would this make the back more twitchy since i have that rear sway bar? would abit of rear toe out help with rear traction? thanks |
Sponsored Links |
03-03-2015, 06:16 PM | #2 |
Senior Member
Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,929
|
why so much toe out on the fronts?
rears would be good as is. |
05-03-2015, 05:42 PM | #3 |
Junior Member
Join Date: Jun 2014
Location: sydney
Car: bj astina 1.8
Posts: 14
|
i didnt think 1mm toe out was alot. from what i read toe out improves turn in response and might help abit with understeer
|
06-03-2015, 04:40 AM | #4 |
Senior Member
|
0.5 total toe up front and 1mm total toe rear, stiffer rear sway bar will reduce understeer.
__________________
http://www.astinagt.com/forums/showthread.php?t=18798 WORKLOG |
Thread Tools | |
Display Modes | |
|
|