AGT Mod Day - October 2011 - Page 6

phildough · 15-10-2011, 06:45 PM

We can have it here at my place, my flatmate has no problem the others aren't here so I made the decision for them.
There is enough room for 4-6 cars up the drive way at a time., I have basic limited tools (spanners, socket set, screw drivers etc but no jacks, stands or ramps sorry) so bring what you need/
We have a BBQ here or the waterfront for fush and chups is 5 min away and i'll park my scooter out the front as supercheap or repco is 5 min away if we need an emergency parts run.
Rhys if your painting calipers goes make sure you have enough time and are first up the drive as you may be last to leave, btw do you have enough paint for two cars???

maztech · 15-10-2011, 06:53 PM

I got no problem bringing jack n 4 stands but I will prob leave before it is all done so I will leave them in your care Phil. Would suggest to clean em with spray carbie clean as it doesn't wet the calipers , just don't get it on the dust boots .

Ice88 · 15-10-2011, 06:54 PM

I *might* be there. Im neck deep in assignment work atm :/

If I can finish this UML Diagram and get a decent way into my BPMN model ill be there. Will let you know though!

Rhys · 15-10-2011, 07:05 PM

I've got a can of blue and a can of clear- I'm happy to get another can of colour if you want to do yours too- as a thank you for letting us use your place.

Alternatively I could just prep em for painting tomorrow and do the actual painting next weekend.

Samsara · 15-10-2011, 07:18 PM

I have a jack, but no stands.

how much do those wiring loom adapters cost? and what do they look like?

maztech · 15-10-2011, 07:20 PM

You can bring the jack then as mine is workshop size , I will bring 4 stands for people to use. Make sure you bring heaps of newspaper.

DavoAust · 15-10-2011, 07:58 PM

I'll bring a couple of stands too. And a whole bunch of tools.

maztech · 15-10-2011, 08:12 PM

Hey Davo , let us know what we need , let's organize this now , how many stands you got , and are we doin front an rear on how many cars , cause my stuff in my workshop and is about 10 min away but I need to know tonight what I need to get . Hey guys I don't mind getting my stuff just need to know whats happening .

Rhys · 15-10-2011, 08:14 PM

I've decided I'll just go and buy a pair of stands and a jack tomorrow- I'll need them in future anyways so I should be right. Is there a chat thing for AGT?

Ice88 · 15-10-2011, 08:18 PM

I would love to borrow a breaker bar or a long socket set arm thingy to get more leverage to undo the spring nuts on my exhaust. (Have sockets just need more leverage to get the nuts off that or muscles

)

Unless there's a special tool for getting the O2 sensor I'm all good

Ill be bringing tomorrow:
Socket Set
Jack Stands
Jack
AutoExe Header
Some Spanners
Ajustable Spanner

maztech · 15-10-2011, 08:23 PM

Hey Phil can ya PM me ya address please?
Rhys don't rush in and buy a rubbish jack just for tomorrow cause those super cheap and autobahn jacks are not worth the money , just don't want Ya to be ripped off ( they are ok for light stuff but if ya want it for years have a look at Transquip web site.)
Times like this I wish I had my own workshop!

maztech · 15-10-2011, 08:28 PM

Quote:

Originally Posted by Ice88

I would love to borrow a breaker bar or a long socket set arm thingy to get more leverage to undo the spring nuts on my exhaust. (Have sockets just need more leverage to get the nuts off that or muscles

)

Unless there's a special tool for getting the O2 sensor I'm all good

Ill be bringing tomorrow:
Socket Set
Jack Stands
Jack
AutoExe Header
Some Spanners
Ajustable Spanner

Get some CRC and I have a long 14mm spanner that will do it.
Gee I will have to check this thread in the morning cause after my bottle of bourbon I won't remember anything !!!!!!!

Ice88 · 15-10-2011, 08:40 PM

That similar to liquid wrench?

Rhys · 15-10-2011, 08:43 PM

hahaha will you remember to check the thread though??

I thought a supercheap jack would be OK for occasional use but I'll take your word for it, thanks mate.

I guess we can talk about brands and such tomorrow.

phildough · 15-10-2011, 08:45 PM

Cool I will get the petrol skateboards out of the shed and fix them tomorrow.
Maybe we can get one working so we can play on it.
Marc, I might set up a camera so you can log in and watch

Ice88 · 15-10-2011, 08:47 PM

I also need your address Phil

Rhys · 15-10-2011, 08:49 PM

Me too please! also, what time do you want us cool cats to rock up?

phildough · 15-10-2011, 09:09 PM

I was thinking maybe 9:30-10, give me a chance to sleep in a bit then get a coffee and breakfast.
I also have my 1.8 if anyone wants to pull it apart to see what failed, I dont think its that bad. I still have the loom, starter, ECU and alternator.

Rhys · 15-10-2011, 09:18 PM

OK I'll see you guys around 10. Thanks Phil!

Ice88 · 15-10-2011, 10:03 PM

So early :P

But yeah ill be there about 10:30-11 most likely. Ill aim for earlier but shall see!

15-10-2011, 06:54 PM	#103
Ice88 Senior Member Join Date: Jun 2008 Location: Auchenflower, Brisbane Car: Blue SP20 Posts: 2,782	I might be there. Im neck deep in assignment work atm :/ If I can finish this UML Diagram and get a decent way into my BPMN model ill be there. Will let you know though! __________________

15-10-2011, 07:58 PM	#107
DavoAust Senior Member Join Date: Mar 2007 Location: Brisbane Car: Red '93 3000GT / Black '08 Ninja 250R Posts: 2,930 View Photos By: DavoAust	I'll bring a couple of stands too. And a whole bunch of tools. __________________ Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT

15-10-2011, 08:18 PM	#110
Ice88 Senior Member Join Date: Jun 2008 Location: Auchenflower, Brisbane Car: Blue SP20 Posts: 2,782	I would love to borrow a breaker bar or a long socket set arm thingy to get more leverage to undo the spring nuts on my exhaust. (Have sockets just need more leverage to get the nuts off that or muscles ) Unless there's a special tool for getting the O2 sensor I'm all good Ill be bringing tomorrow: Socket Set Jack Stands Jack AutoExe Header Some Spanners Ajustable Spanner __________________

15-10-2011, 08:40 PM	#113
Ice88 Senior Member Join Date: Jun 2008 Location: Auchenflower, Brisbane Car: Blue SP20 Posts: 2,782	That similar to liquid wrench? __________________

15-10-2011, 08:47 PM	#116
Ice88 Senior Member Join Date: Jun 2008 Location: Auchenflower, Brisbane Car: Blue SP20 Posts: 2,782	I also need your address Phil __________________

15-10-2011, 06:45 PM	#101
phildough Banned Join Date: May 2006 Location: Brisneyland, Queensland Car: 2002 Mazda Frankenstina Posts: 2,868 View Photos By: phildough	We can have it here at my place, my flatmate has no problem the others aren't here so I made the decision for them. There is enough room for 4-6 cars up the drive way at a time., I have basic limited tools (spanners, socket set, screw drivers etc but no jacks, stands or ramps sorry) so bring what you need/ We have a BBQ here or the waterfront for fush and chups is 5 min away and i'll park my scooter out the front as supercheap or repco is 5 min away if we need an emergency parts run. Rhys if your painting calipers goes make sure you have enough time and are first up the drive as you may be last to leave, btw do you have enough paint for two cars???

15-10-2011, 06:53 PM	#102
maztech Senior Member Join Date: Aug 2009 Location: QLD Car: ...... Posts: 952	I got no problem bringing jack n 4 stands but I will prob leave before it is all done so I will leave them in your care Phil. Would suggest to clean em with spray carbie clean as it doesn't wet the calipers , just don't get it on the dust boots .

15-10-2011, 07:05 PM	#104
Rhys Senior Member Join Date: Apr 2011 Location: Brisbane, QLD Car: 2000 BJ Protege Posts: 714	I've got a can of blue and a can of clear- I'm happy to get another can of colour if you want to do yours too- as a thank you for letting us use your place. Alternatively I could just prep em for painting tomorrow and do the actual painting next weekend.

15-10-2011, 07:18 PM	#105
Samsara Senior Member Join Date: Jun 2011 Location: Brisbane, QLD Car: 2003 BJ-II 323 Astina Hatch Posts: 588	I have a jack, but no stands. how much do those wiring loom adapters cost? and what do they look like?

15-10-2011, 07:20 PM	#106
maztech Senior Member Join Date: Aug 2009 Location: QLD Car: ...... Posts: 952	You can bring the jack then as mine is workshop size , I will bring 4 stands for people to use. Make sure you bring heaps of newspaper.

15-10-2011, 08:12 PM	#108
maztech Senior Member Join Date: Aug 2009 Location: QLD Car: ...... Posts: 952	Hey Davo , let us know what we need , let's organize this now , how many stands you got , and are we doin front an rear on how many cars , cause my stuff in my workshop and is about 10 min away but I need to know tonight what I need to get . Hey guys I don't mind getting my stuff just need to know whats happening .

15-10-2011, 08:14 PM	#109
Rhys Senior Member Join Date: Apr 2011 Location: Brisbane, QLD Car: 2000 BJ Protege Posts: 714	I've decided I'll just go and buy a pair of stands and a jack tomorrow- I'll need them in future anyways so I should be right. Is there a chat thing for AGT?

15-10-2011, 08:23 PM	#111
maztech Senior Member Join Date: Aug 2009 Location: QLD Car: ...... Posts: 952	Hey Phil can ya PM me ya address please? Rhys don't rush in and buy a rubbish jack just for tomorrow cause those super cheap and autobahn jacks are not worth the money , just don't want Ya to be ripped off ( they are ok for light stuff but if ya want it for years have a look at Transquip web site.) Times like this I wish I had my own workshop!

15-10-2011, 08:43 PM	#114
Rhys Senior Member Join Date: Apr 2011 Location: Brisbane, QLD Car: 2000 BJ Protege Posts: 714	hahaha will you remember to check the thread though?? I thought a supercheap jack would be OK for occasional use but I'll take your word for it, thanks mate. I guess we can talk about brands and such tomorrow.

15-10-2011, 08:45 PM	#115
phildough Banned Join Date: May 2006 Location: Brisneyland, Queensland Car: 2002 Mazda Frankenstina Posts: 2,868 View Photos By: phildough	Cool I will get the petrol skateboards out of the shed and fix them tomorrow. Maybe we can get one working so we can play on it. Marc, I might set up a camera so you can log in and watch

15-10-2011, 08:49 PM	#117
Rhys Senior Member Join Date: Apr 2011 Location: Brisbane, QLD Car: 2000 BJ Protege Posts: 714	Me too please! also, what time do you want us cool cats to rock up?

15-10-2011, 09:09 PM	#118
phildough Banned Join Date: May 2006 Location: Brisneyland, Queensland Car: 2002 Mazda Frankenstina Posts: 2,868 View Photos By: phildough	I was thinking maybe 9:30-10, give me a chance to sleep in a bit then get a coffee and breakfast. I also have my 1.8 if anyone wants to pull it apart to see what failed, I dont think its that bad. I still have the loom, starter, ECU and alternator.

15-10-2011, 09:18 PM	#119
Rhys Senior Member Join Date: Apr 2011 Location: Brisbane, QLD Car: 2000 BJ Protege Posts: 714	OK I'll see you guys around 10. Thanks Phil!

15-10-2011, 10:03 PM	#120
Ice88 Senior Member Join Date: Jun 2008 Location: Auchenflower, Brisbane Car: Blue SP20 Posts: 2,782	So early :P But yeah ill be there about 10:30-11 most likely. Ill aim for earlier but shall see! __________________