|
27-08-2014, 02:48 PM | #1 |
Junior Member
Join Date: Aug 2014
Location: sydney
Car: sp20
Posts: 4
|
How to: Replace passanger side guard?fender?
i have recently been side swiped causing damage to the front left guard on my 2003 sp20. I've finally located a replacement, correct colour and well priced!
HAS ANYONE REMOVED/ REPLACED THE FRONT GUARD/FENDER? Any relevant info or tips are appreciated? Cheers, crackers |
Sponsored Links |
06-09-2014, 12:20 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: wollongong
Car: 99, BJ 323 astina hatch
Posts: 1,506
|
Basically you got to remove the front bumper, headlight, inner guard, side skirt, ( be careful to not break the clips )
Then just start unbolting the guard. They will be along the top, the ones at the Rad support, 2 I believe at the bottom where the skirt was. And 2 or 3 in the door jam, where the guard meets the door. Then remove. Put new one on, line it all up and tighten it down And add or the other removed parts
__________________
Cars .. 1: 241kw Turbo 1999 BJ 323 Astina . 2: 1983 ke70 Corolla. 3: 2011 PK Ranger Wildtrak (tow car ) |
06-09-2014, 12:21 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: wollongong
Car: 99, BJ 323 astina hatch
Posts: 1,506
|
There is also screws along the bottom of the side skits.
__________________
Cars .. 1: 241kw Turbo 1999 BJ 323 Astina . 2: 1983 ke70 Corolla. 3: 2011 PK Ranger Wildtrak (tow car ) |
23-09-2014, 01:20 PM | #4 |
Junior Member
Join Date: Aug 2014
Location: sydney
Car: sp20
Posts: 4
|
Bloody champion! thanks for your help mate, ill let you know how i go..
|
|
|