Question regarding redbook

Fez323 · 23-02-2010, 08:59 PM

http://redbook.com.au/used-cars/deta...d=126FC9F87522

As the website says, the astina has 93kw. Is this at the flywheel or wheels? Thanks in advance.

70NYD · 23-02-2010, 09:04 PM

all factory specs are at the flywheel

marcs_sp20 · 23-02-2010, 09:04 PM

all those figures are at the flywheel...

Fez323 · 23-02-2010, 09:37 PM

oh ok...damn =/ i assume for the wheels it will be like 70ish?

bourbon · 23-02-2010, 09:52 PM

Id say in the 60s, its normally 20-25% lower at the wheels. But the age of the car will make it lower again

marcs_sp20 · 23-02-2010, 09:53 PM

rule of thumb is around 80% of Flywheel power, but remember, this is not accurate

93kw at the flywheel = around 74.5kw at the wheels

Rupewrecht · 23-02-2010, 10:14 PM

About 63-65 atw is common for a 1.8 BA

project.r.racing · 23-02-2010, 10:16 PM

didn't someone pull 68kw on a dyno in the past year in a BA? had only cat back exhaust. so would support dan's figures.

Rupewrecht · 23-02-2010, 10:30 PM

I remember Cityend had his stocko dynoed at 63ish, and someone else that escapes me was around that figure.

70NYD · 23-02-2010, 10:44 PM

haha thats so sad and a B16 will do a 100kw atw (crx)

marcs_sp20 · 23-02-2010, 10:57 PM

Quote:

Originally Posted by project.r.racing

didn't someone pull 68kw on a dyno in the past year in a BA? had only cat back exhaust. so would support dan's figures.

That would be steve, and it was 74kw atw

Fez323 · 24-02-2010, 05:05 PM

Quote:

Originally Posted by marcs_sp20

That would be steve, and it was 74kw atw

Wow 11kw extra just with a catback exhaust, what brand did he use?

marcs_sp20 · 24-02-2010, 05:08 PM

that was with a pee shooter exhaust, no cat back

23-02-2010, 08:59 PM	#1
Fez323 Junior Member Join Date: Feb 2010 Location: Parramatta Car: Astina BA 1.8 hatch Posts: 112 View Photos By: Fez323	Question regarding redbook http://redbook.com.au/used-cars/deta...d=126FC9F87522 As the website says, the astina has 93kw. Is this at the flywheel or wheels? Thanks in advance.

23-02-2010, 09:04 PM	#2
70NYD Veni, vidi, vici Join Date: Mar 2008 Location: Brisbane Car: 1996 BA Hatch & 2005 RX8 Posts: 4,911 View Photos By: 70NYD	all factory specs are at the flywheel __________________

23-02-2010, 09:04 PM	#3
marcs_sp20 Moderator Join Date: Oct 2005 Location: Ipswich, Queensland Car: 2002 Mazda Astina SP20 2006 Mazda 6 GY Wagon Posts: 9,769 View Photos By: marcs_sp20	all those figures are at the flywheel... __________________

23-02-2010, 09:52 PM	#5
bourbon The Hairy Mod Join Date: Sep 2005 Location: southside ya'll and North Side, Brissy Car: MINI Cooper S 2003 Posts: 8,110	Id say in the 60s, its normally 20-25% lower at the wheels. But the age of the car will make it lower again __________________ For All your crash repair panels & lights, clear lights contact us at PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735

23-02-2010, 09:53 PM	#6
marcs_sp20 Moderator Join Date: Oct 2005 Location: Ipswich, Queensland Car: 2002 Mazda Astina SP20 2006 Mazda 6 GY Wagon Posts: 9,769 View Photos By: marcs_sp20	rule of thumb is around 80% of Flywheel power, but remember, this is not accurate 93kw at the flywheel = around 74.5kw at the wheels __________________

23-02-2010, 09:37 PM	#4
Fez323 Junior Member Join Date: Feb 2010 Location: Parramatta Car: Astina BA 1.8 hatch Posts: 112 View Photos By: Fez323	oh ok...damn =/ i assume for the wheels it will be like 70ish?

23-02-2010, 10:14 PM	#7
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	About 63-65 atw is common for a 1.8 BA __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

23-02-2010, 10:16 PM	#8
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	didn't someone pull 68kw on a dyno in the past year in a BA? had only cat back exhaust. so would support dan's figures.

23-02-2010, 10:30 PM	#9
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	I remember Cityend had his stocko dynoed at 63ish, and someone else that escapes me was around that figure. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

23-02-2010, 10:44 PM	#10
70NYD Veni, vidi, vici Join Date: Mar 2008 Location: Brisbane Car: 1996 BA Hatch & 2005 RX8 Posts: 4,911 View Photos By: 70NYD	haha thats so sad and a B16 will do a 100kw atw (crx) __________________

24-02-2010, 05:08 PM	#13
marcs_sp20 Moderator Join Date: Oct 2005 Location: Ipswich, Queensland Car: 2002 Mazda Astina SP20 2006 Mazda 6 GY Wagon Posts: 9,769 View Photos By: marcs_sp20	that was with a pee shooter exhaust, no cat back __________________