|
10-08-2008, 08:06 PM | #1 |
Junior Member
Join Date: Jul 2008
Location: Gold Coast
Car: KJ2
Posts: 7
|
BPT into a 96 kj laser or (ba) i think
As above
I am putting a bpt into a 96 kj laser 1.6l ( BA) i have a halfcut well it was i have stipped it and getting ready to put everything in to the laser i have a couple of questions and hopeing someone can help. with the wiring i need to know what changes have to be made? i am useing the f series box for now the half cut was a familia gxt 4wd can i use the clutch or is it to big i know i have to change the fly wheel to suit gearbox ie: use 1.6l one but can i use the clutch? and lastly what mounts do i use do i use the b6 one or bpt? any help would be really good |
Sponsored Links |
10-08-2008, 09:39 PM | #2 |
Senior Member
Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,929
|
You are aware that the f series box will last 6 weeks to 6 months?
Clutch/flywheel answer = just use the f series clutch and flywheel, just get a heavy duty clutch. You will need to get all new engine and gearbox mounts from a BA Astina or a KJ Laser that was fitted with the BP/1.8L engine and f series gearbox. All will be useless except maybe the drivers side one. Ryan |
11-08-2008, 04:24 PM | #3 | |
Junior Member
Join Date: Jul 2008
Location: Gold Coast
Car: KJ2
Posts: 7
|
yeah mate aware of that, the motor is stock at the moment and not go to drive it to hard till i get the gearbox done.so just to confirm i have to use all thoes mounts from a ba or kj with 1.8 & f serise ( all the other ones i have off B6D and BPT will be useless to me?)
thanks for that info very helpfull mate. have you any ideas about the wiring side of things? Quote:
|
|
|
|