|
03-11-2007, 09:05 PM | #1 |
Junior Member
|
NEED HELP bg astina with bp engine auto to manual conversion
ok my auto shat, i screwed by the wreckers about 10 times trying to get a replacement so now i am converting to a manual for free (but i gotta do all the work) and i am NEVER GOING AUTO EVER AGAIN!!! the wrecker is giving me all of the parts that are required to do a conversion for no extra cost than what i have all ready payed for the auto
ok first question how much wiring do i need to remove and swap? 2 do i have to move anything around? that should do for now
__________________
1990 323 astina bg was an auto now a manual |
Sponsored Links |
04-11-2007, 01:33 AM | #2 |
Senior Member
Join Date: Mar 2007
Location: Brisbane
Car: Red '93 3000GT / Black '08 Ninja 250R
Posts: 2,930
|
I'm gonna assume the auto has extra wiring for the box, so you should swap over that loom to the manual one. you will need the manual ECU too
as for other things, get ready to change over your centre console, pedal arrangement (get all the manual pedals), may have some engine bay mods to do to get the master and slave cylinders for the clutch to fit. read the other thread for bits and pieces you needs, that should tell you what you need to move
__________________
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT |
04-11-2007, 07:20 AM | #3 |
Nate Dog
|
what dave said. BIG BIG BIG BIG job. easier to sell the auto and buy manual. Almost nothing in the drive train is interchangeble.
__________________
"and history shall tremble at the name, Sydney Applebaum!!!" "love between two people is a wonderfull thing, between three it's fantastic" |
04-11-2007, 02:03 PM | #4 | |
Senior Member
Join Date: Mar 2007
Location: Brisbane
Car: Red '93 3000GT / Black '08 Ninja 250R
Posts: 2,930
|
Quote:
also: - pedals (all 3) - mount for clutch pedal wait for it, i just though of another one. is your cluster auto specific? like have any selector markings or that sorta thing on it? you may need to change it too. Just a thought, will the DOHC box work with the SOHC engine?
__________________
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT |
|
04-11-2007, 02:08 PM | #5 |
Junior Member
|
yeah i am pretty sure ther is no differance.
but any way i cant afford a new car at the moment cus since mine has been down due to getting boned by the wreckers i have had no job or income or savings, and the wreckers are giving me all of the parts for free cuz they are finding it very hard to find a working auto box so i have no other choice i have to go through with the manual conversion weather i like it or not.
__________________
1990 323 astina bg was an auto now a manual |
05-11-2007, 11:20 AM | #6 |
The Hairy Mod
Join Date: Sep 2005
Location: southside ya'll and North Side, Brissy
Car: MINI Cooper S 2003
Posts: 8,110
|
your gonna need lots and lots bro...expect it to carry out for a while...wreckers will keep screwing you around...
also no need to keep making newtopics on this stuff..keep it to one thread sorry...
__________________
For All your crash repair panels & lights, clear lights contact us at
PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735 |
05-11-2007, 01:58 PM | #7 |
Junior Member
|
ok ill just stick to this thread cuz i have no doubt that i am going to need a bit of help on this.
the parts should be arriving tomorrow cuz the wreckers are just pretty much dissasembaling an astina and giving me all the manual related parts
__________________
1990 323 astina bg was an auto now a manual |
05-11-2007, 02:20 PM | #8 |
The Hairy Mod
Join Date: Sep 2005
Location: southside ya'll and North Side, Brissy
Car: MINI Cooper S 2003
Posts: 8,110
|
hahaha you need absolutly everythin....
__________________
For All your crash repair panels & lights, clear lights contact us at
PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735 |
05-11-2007, 02:25 PM | #9 |
Junior Member
|
i found this other computer, does it need to moved of replaced cus it sorta looks like it is in the way of where the clutch needs to go
__________________
1990 323 astina bg was an auto now a manual Last edited by 90323astina; 05-11-2007 at 02:29 PM. Reason: wrong pic again |
05-11-2007, 03:09 PM | #10 |
Senior Member
Join Date: Mar 2007
Location: Brisbane
Car: Red '93 3000GT / Black '08 Ninja 250R
Posts: 2,930
|
yeah you're right, thats the clutch mount point. you can probably take it out, put the clutch in and refit it. what did you do bourbs? when are you planning on doing the conversion? this weekend?
__________________
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT |
05-11-2007, 03:41 PM | #11 |
The Hairy Mod
Join Date: Sep 2005
Location: southside ya'll and North Side, Brissy
Car: MINI Cooper S 2003
Posts: 8,110
|
WTF...there shouldnt be a computer there...i never saw one there...the computer you need should be under the centre bit of the dash below the glove box bit towards the centre...if you take of the panel on the passenger side you would see the ecu...
__________________
For All your crash repair panels & lights, clear lights contact us at
PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735 |
05-11-2007, 03:58 PM | #12 |
Senior Member
Join Date: Mar 2007
Location: Brisbane
Car: Red '93 3000GT / Black '08 Ninja 250R
Posts: 2,930
|
So your ECU is in the same place as the BA then? 90323 are you sure thats a computer and not just a cover over something else?
__________________
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT |
05-11-2007, 04:03 PM | #13 |
The Hairy Mod
Join Date: Sep 2005
Location: southside ya'll and North Side, Brissy
Car: MINI Cooper S 2003
Posts: 8,110
|
no thats def a computer...even got a sticker on it that a computer has...but yes the BA and BG run the comptuer in the same spot...
__________________
For All your crash repair panels & lights, clear lights contact us at
PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735 |
05-11-2007, 04:07 PM | #14 |
Senior Member
Join Date: Mar 2007
Location: Brisbane
Car: Red '93 3000GT / Black '08 Ninja 250R
Posts: 2,930
|
that really weird then, what would the ECU be doing in such an easy to kick spot. is there a heap of extra wiring under there? like its been moved?
__________________
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT |
05-11-2007, 04:15 PM | #15 |
The Hairy Mod
Join Date: Sep 2005
Location: southside ya'll and North Side, Brissy
Car: MINI Cooper S 2003
Posts: 8,110
|
would of been moved as the wiring only has a distance to get to where it normally is...unless ifthis is the auto ecu...im pretty sure m auto one was the same ecu but with the seperate which was in the passenger side foot well to the left hand side of the foot well...
__________________
For All your crash repair panels & lights, clear lights contact us at
PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735 |
05-11-2007, 04:42 PM | #16 |
Junior Member
|
ok the normal ecu is where it is sposed to be in the centre under the air box and dash but the other one is wat is confusing me plus it has 2 huge plugs full of wires that go from it to the main ecu wiring loom
__________________
1990 323 astina bg was an auto now a manual |
05-11-2007, 04:44 PM | #17 |
Junior Member
|
ill try to double check me workshop manual
__________________
1990 323 astina bg was an auto now a manual |
05-11-2007, 04:49 PM | #18 |
Senior Member
Join Date: Mar 2007
Location: Brisbane
Car: Red '93 3000GT / Black '08 Ninja 250R
Posts: 2,930
|
thats really odd then. it sounds like they put the auto comp in the drivers footwell :s. what do you do with it anyway? change the loom+ECU over and sell it?
__________________
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT |
05-11-2007, 04:53 PM | #19 |
Junior Member
|
ok just noticed in book it is only there for the auto trannie so it getting the chuck
__________________
1990 323 astina bg was an auto now a manual |
05-11-2007, 05:03 PM | #20 |
Senior Member
Join Date: Mar 2007
Location: Brisbane
Car: Red '93 3000GT / Black '08 Ninja 250R
Posts: 2,930
|
Damn weird place to have it. I thought they were in the passenger footwell on pretty much every car. Maybe mazda felt like a laugh. So what are they sending you for the conversion?
__________________
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT |
|
|