FS QLD - BP NA Quad Throttle Engine Package + BP Parts

g0llyw0g · 30-06-2013, 12:22 PM

All prices are negotiable, if your interested about any of this gear just ring or text me 0439 892 905 - Steve

I have a 150hp BP NA race engine for sale, I bought KE_GHIA's quad throttle white laser and am now selling the good bits off it.
I have replaced the timing belt, cam seals, the idle and idle tensioner and given it new NGK copper plugs. I have put it into my KC and it runs really well, revs to 8000rpm and just screams with the cams and throttle bodies sounds pretty awesome.

This is what you will get:
- Rebuilt standard 1.8 BP NA with 50 xxxkms
- Stage 2 WHP cams with 226@50, 270 deg and .363" lift
- Suzuki Hayabusa Quad Throttle Bodies
- Gates T197R racing belt
- Adjustable cam gears
- BP NA injectors
- Vacume Tank with inputs for the brake booster, map sensor, fuel reg and throttle bodies
- Genie extractors
- Custom throttle cable bracket
- 4x Microtech coils
- Ignition leads
- Microtech LT10s
- Microtech X4 coil ecu
- Microtech hand controller
- Microtech plug and play loom
- Microtech instruction manual

This is a plug and play complete engine package.

$2000

Other stuff:
Mazda 1.8 BP 1mm oversized valves - Super Tech Brand from USA - Still in box
$200

Monza Race seats Blue/Black with 2 x harness - need a good clean but otherwise in pretty good nick. No markings on the harnesses not sure if they are CAMS Approved...
$200

TX3 FWD slotted rotors
$50

4x Autometer white face gauges 2 1/16", oil pressure, oil temp, water temp, volts
$150

BPT Jim Berry Race Clutch - organic disc with 1800lbs pressure plate - almost new - came off my old BPT engine, held 250hp no problems
$200

SLY 323 · 30-06-2013, 03:05 PM

Drooooooooooooooooool.

Pop this bad boy in while I build my turbo motor.

Some food for thought.

Clean_Cookie · 30-06-2013, 05:29 PM

If only it had 11:1 pistons ey. Good luck with sale.

project.r.racing · 30-06-2013, 09:02 PM

I was wondering when this would turn up on AGT. Shame the KE had to be pulled apart.

30-06-2013, 12:22 PM	#1
g0llyw0g Junior Member Join Date: Aug 2010 Location: QLD Car: TX3 Posts: 3	FS: [QLD] BP NA Quad Throttle Engine Package + BP Parts All prices are negotiable, if your interested about any of this gear just ring or text me 0439 892 905 - Steve I have a 150hp BP NA race engine for sale, I bought KE_GHIA's quad throttle white laser and am now selling the good bits off it. I have replaced the timing belt, cam seals, the idle and idle tensioner and given it new NGK copper plugs. I have put it into my KC and it runs really well, revs to 8000rpm and just screams with the cams and throttle bodies sounds pretty awesome. This is what you will get: - Rebuilt standard 1.8 BP NA with 50 xxxkms - Stage 2 WHP cams with 226@50, 270 deg and .363" lift - Suzuki Hayabusa Quad Throttle Bodies - Gates T197R racing belt - Adjustable cam gears - BP NA injectors - Vacume Tank with inputs for the brake booster, map sensor, fuel reg and throttle bodies - Genie extractors - Custom throttle cable bracket - 4x Microtech coils - Ignition leads - Microtech LT10s - Microtech X4 coil ecu - Microtech hand controller - Microtech plug and play loom - Microtech instruction manual This is a plug and play complete engine package. $2000 Other stuff: Mazda 1.8 BP 1mm oversized valves - Super Tech Brand from USA - Still in box $200 Monza Race seats Blue/Black with 2 x harness - need a good clean but otherwise in pretty good nick. No markings on the harnesses not sure if they are CAMS Approved... $200 TX3 FWD slotted rotors $50 4x Autometer white face gauges 2 1/16", oil pressure, oil temp, water temp, volts $150 BPT Jim Berry Race Clutch - organic disc with 1800lbs pressure plate - almost new - came off my old BPT engine, held 250hp no problems $200 Last edited by g0llyw0g; 30-06-2013 at 12:31 PM.

30-06-2013, 03:05 PM	#2
SLY 323 Senior Member Join Date: Jul 2010 Location: Wollongong Car: 95' Mazda BA 323 Posts: 747	Drooooooooooooooooool. Pop this bad boy in while I build my turbo motor. Some food for thought. __________________ Too many Mazdas. ♡

30-06-2013, 05:29 PM	#3
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	If only it had 11:1 pistons ey. Good luck with sale. __________________ Worklog

30-06-2013, 09:02 PM	#4
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	I was wondering when this would turn up on AGT. Shame the KE had to be pulled apart.