Bloody exhaust drone/resonance - Page 2

Rupewrecht · 24-10-2007, 02:30 PM

Thread cleaned up.

RedLineResident · 24-10-2007, 04:08 PM

Quote:

Originally Posted by Rupewrecht

Thread cleaned up.

what does that mean??

I am actuallym finding this thread quiet interesting o follow. I like the topic, its fuscinating.

Rupewrecht · 24-10-2007, 04:17 PM

Just some unnecessary personal attacks, which have been removed.

FEM · 24-10-2007, 09:03 PM

prolly needed to be cleaned, newman woulda cracked the sh!ts at me..

Clarky_BA · 28-10-2007, 03:23 PM

dynamat only does so much, and personally I think it is best for the audio boys and not the drone. I have my car fully lined, even went as far as to stick a sheet on the upper side of the exhaust. I have a lukey triflow and it only drones at specific rev ranges mainly 500rpm through to 6000rpm... And it can be unbearable. Went to the exhaust shop and said can I get a cat, they looked and I have two already. However after reading this I am going to order a lukey hiflow cat and see if that helps. Like you I dont want to lose the exhaust the car sounds too dam good with it.

project.r.racing · 28-10-2007, 09:33 PM

i'm gonna agree with dan with this one. get a bigger cat asap... meow!
i have a BP-05 engine and they are louder and crazier than BP-26 engines. when i replaced my cat with a bigger high flow version, nearly all drone was gone and it sounded better, had more power and responce. there was no negatives to doing this.

ryan

FEM · 30-10-2007, 02:52 PM

hmm, no drone?

i covered the tip the other day with some car board and is was SILENT, it could still flow too! i rekin a smaller tip ftw!

bourbon · 30-10-2007, 03:00 PM

hmmm wtf you mean you covered it???

DavoAust · 30-10-2007, 03:12 PM

he put some cardboard over the tip to make the effective size smaller. that would take any noise the tip is contributing up in frequency, eliminating the low bassy drone

Clarky_BA · 30-10-2007, 03:48 PM

I am going to try this tonight. I have a big oval tip, ford rx8 tip. Interested to see if it makes a difference. If it works I wonder if going to a dual tip would be better than a single big one. To stop any questions what I mean is instead of have a O tip I would put in an OO tip, or maybe an □□ tip.

bourbon · 30-10-2007, 04:01 PM

or even "oo" "ΔΔ"

FEM · 30-10-2007, 04:02 PM

hmm... that is interestiing.. i think i got a 4.5" tip atm on a TRR can muffler thing.. i covered the tip and it was silent, so i am going to get a 2 or 2.25" tip tomoro.. what u think?

bourbon · 30-10-2007, 04:03 PM

I THINK it will look girly!! you could even get a LOVE heart put on the end tooo!!! hahahahahaahahaha

Rupewrecht · 30-10-2007, 04:06 PM

Nah, get a Hello Kitty one.

No wonder you've got a drone with a 4.5" drainpipe on the back! Definitely get a smaller tip.

FEM · 30-10-2007, 04:06 PM

what about 2 tips..?

hahahah, love heart FTL!! i dont care what people think of my zorst..

DavoAust · 30-10-2007, 04:11 PM

dude get 2 shiny 2.25" tips. it'll look good and should cut down on the noise

bourbon · 30-10-2007, 04:12 PM

well if you dont care get a love heart one... prove to usyou dont care what we think

hahaha

FEM · 30-10-2007, 04:16 PM

where do i get one !!! ???

ill try the one tip for the minute...
what about reducing in the middle of the zorst to a a 2.5 with 2 reso0nators?

bourbon · 30-10-2007, 04:20 PM

goto right price exhaust and mufflers near my work... corner of moss st and herbert st...

Putonyourshoes · 30-10-2007, 04:20 PM

http://tbn0.google.com/images?q=tbn:...-tail-pipe.jpg

something like that mate?
decent tip nice shape
and its red

BAHAHAHAHAHa

24-10-2007, 02:30 PM	#21
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Thread cleaned up. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

24-10-2007, 04:17 PM	#23
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Just some unnecessary personal attacks, which have been removed. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

24-10-2007, 09:03 PM	#24
FEM Senior Member Join Date: Jan 2007 Location: Brisbane's West Car: Familia/Astina GTX Posts: 949 View Photos By: FEM	prolly needed to be cleaned, newman woulda cracked the sh!ts at me.. __________________ My Story.. http://www.astinagt.com/forums/vbpic...?do=view&g=394[/CENTER]

28-10-2007, 03:23 PM	#25
Clarky_BA Junior Member Join Date: Jan 2007 Location: Tassie!! Car: 323 BA Hardtop Posts: 81 View Photos By: Clarky_BA	dynamat only does so much, and personally I think it is best for the audio boys and not the drone. I have my car fully lined, even went as far as to stick a sheet on the upper side of the exhaust. I have a lukey triflow and it only drones at specific rev ranges mainly 500rpm through to 6000rpm... And it can be unbearable. Went to the exhaust shop and said can I get a cat, they looked and I have two already. However after reading this I am going to order a lukey hiflow cat and see if that helps. Like you I dont want to lose the exhaust the car sounds too dam good with it. __________________ Some men are born to greatness, me I am lucky if my socks match......

28-10-2007, 09:33 PM	#26
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	i'm gonna agree with dan with this one. get a bigger cat asap... meow! i have a BP-05 engine and they are louder and crazier than BP-26 engines. when i replaced my cat with a bigger high flow version, nearly all drone was gone and it sounded better, had more power and responce. there was no negatives to doing this. ryan Last edited by project.r.racing; 28-10-2007 at 09:36 PM.

30-10-2007, 02:52 PM	#27
FEM Senior Member Join Date: Jan 2007 Location: Brisbane's West Car: Familia/Astina GTX Posts: 949 View Photos By: FEM	hmm, no drone? i covered the tip the other day with some car board and is was SILENT, it could still flow too! i rekin a smaller tip ftw! __________________ My Story.. http://www.astinagt.com/forums/vbpic...?do=view&g=394[/CENTER]

30-10-2007, 03:00 PM	#28
bourbon The Hairy Mod Join Date: Sep 2005 Location: southside ya'll and North Side, Brissy Car: MINI Cooper S 2003 Posts: 8,110	hmmm wtf you mean you covered it??? __________________ For All your crash repair panels & lights, clear lights contact us at PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735

30-10-2007, 03:12 PM	#29
DavoAust Senior Member Join Date: Mar 2007 Location: Brisbane Car: Red '93 3000GT / Black '08 Ninja 250R Posts: 2,930 View Photos By: DavoAust	he put some cardboard over the tip to make the effective size smaller. that would take any noise the tip is contributing up in frequency, eliminating the low bassy drone __________________ Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT

30-10-2007, 03:48 PM	#30
Clarky_BA Junior Member Join Date: Jan 2007 Location: Tassie!! Car: 323 BA Hardtop Posts: 81 View Photos By: Clarky_BA	I am going to try this tonight. I have a big oval tip, ford rx8 tip. Interested to see if it makes a difference. If it works I wonder if going to a dual tip would be better than a single big one. To stop any questions what I mean is instead of have a O tip I would put in an OO tip, or maybe an □□ tip. __________________ Some men are born to greatness, me I am lucky if my socks match......

30-10-2007, 04:01 PM	#31
bourbon The Hairy Mod Join Date: Sep 2005 Location: southside ya'll and North Side, Brissy Car: MINI Cooper S 2003 Posts: 8,110	or even "oo" "ΔΔ" __________________ For All your crash repair panels & lights, clear lights contact us at PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735

30-10-2007, 04:02 PM	#32
FEM Senior Member Join Date: Jan 2007 Location: Brisbane's West Car: Familia/Astina GTX Posts: 949 View Photos By: FEM	hmm... that is interestiing.. i think i got a 4.5" tip atm on a TRR can muffler thing.. i covered the tip and it was silent, so i am going to get a 2 or 2.25" tip tomoro.. what u think? __________________ My Story.. http://www.astinagt.com/forums/vbpic...?do=view&g=394[/CENTER]

30-10-2007, 04:03 PM	#33
bourbon The Hairy Mod Join Date: Sep 2005 Location: southside ya'll and North Side, Brissy Car: MINI Cooper S 2003 Posts: 8,110	I THINK it will look girly!! you could even get a LOVE heart put on the end tooo!!! hahahahahaahahaha __________________ For All your crash repair panels & lights, clear lights contact us at PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735

30-10-2007, 04:06 PM	#34
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Nah, get a Hello Kitty one. No wonder you've got a drone with a 4.5" drainpipe on the back! Definitely get a smaller tip. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

30-10-2007, 04:11 PM	#36
DavoAust Senior Member Join Date: Mar 2007 Location: Brisbane Car: Red '93 3000GT / Black '08 Ninja 250R Posts: 2,930 View Photos By: DavoAust	dude get 2 shiny 2.25" tips. it'll look good and should cut down on the noise __________________ Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT

30-10-2007, 04:12 PM	#37
bourbon The Hairy Mod Join Date: Sep 2005 Location: southside ya'll and North Side, Brissy Car: MINI Cooper S 2003 Posts: 8,110	well if you dont care get a love heart one... prove to usyou dont care what we think hahaha __________________ For All your crash repair panels & lights, clear lights contact us at PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735

30-10-2007, 04:16 PM	#38
FEM Senior Member Join Date: Jan 2007 Location: Brisbane's West Car: Familia/Astina GTX Posts: 949 View Photos By: FEM	where do i get one !!! ??? ill try the one tip for the minute... what about reducing in the middle of the zorst to a a 2.5 with 2 reso0nators? __________________ My Story.. http://www.astinagt.com/forums/vbpic...?do=view&g=394[/CENTER]

30-10-2007, 04:20 PM	#39
bourbon The Hairy Mod Join Date: Sep 2005 Location: southside ya'll and North Side, Brissy Car: MINI Cooper S 2003 Posts: 8,110	goto right price exhaust and mufflers near my work... corner of moss st and herbert st... __________________ For All your crash repair panels & lights, clear lights contact us at PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735

30-10-2007, 04:20 PM	#40
Putonyourshoes Senior Member Join Date: Aug 2007 Location: cronulla Car: 2L 96 BA hatch Posts: 1,131 View Photos By: Putonyourshoes	http://tbn0.google.com/images?q=tbn:...-tail-pipe.jpg something like that mate? decent tip nice shape and its red BAHAHAHAHAHa