camshaft regrind

KEEVRS · 17-07-2003, 09:27 PM

8)

Hey ,

Whats included in getting my 1.8l cams reground.
im not sure whats involved , or who could do it.

:?:

is it expensive? i spoke to tighe cams in queensland and they want $600
for a set of cams to be made up.thats a little out of my price range.

can anyone help with some contacts?

i want some more down low torque!

and who wouldnt want somne more top end zap!

thanks all.

KEEVRS

ezin · 17-07-2003, 09:48 PM

Yeah 600's a bit

More tourqe!

More top end!

HA! U need VVTLi!

If i was going to do it, i wouldn'd change the timing of the cams, just give them more lift + heavier V/springs!

Good luck with it!

BigMal · 17-07-2003, 10:11 PM

$600 is about as cheap as I have seen.
You could try some MX5 cams I was going to say
go to www.solomiata.com to look for specs but
website looks to be down. If any the 99 model before
they went variable cam

Regards

Mal

17-07-2003, 09:27 PM	#1
KEEVRS Junior Member Join Date: Jul 2003 Location: .... Car: . Posts: 122	camshaft regrind 8) Hey , Whats included in getting my 1.8l cams reground. im not sure whats involved , or who could do it. :?: is it expensive? i spoke to tighe cams in queensland and they want $600 for a set of cams to be made up.thats a little out of my price range. can anyone help with some contacts? i want some more down low torque! and who wouldnt want somne more top end zap! thanks all. KEEVRS

17-07-2003, 10:11 PM	#3
BigMal 1ST BA TURBO MEMBER Join Date: Mar 2002 Location: Sydney Car: BA Astina Turbo Posts: 4,195 View Photos By: BigMal	$600 is about as cheap as I have seen. You could try some MX5 cams I was going to say go to www.solomiata.com to look for specs but website looks to be down. If any the 99 model before they went variable cam Regards Mal __________________ If you want wind in your hair add a Hairdryer !!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camshaft position sensor...	geetee	Performance & General Maintenance	6	24-04-2006 10:07 AM

17-07-2003, 09:48 PM	#2
ezin AstinaGT Regular Join Date: Jul 2003 Location: melb Posts: 416 View Photos By: ezin	Yeah 600's a bit More tourqe! More top end! HA! U need VVTLi! If i was going to do it, i wouldn'd change the timing of the cams, just give them more lift + heavier V/springs! Good luck with it!