|
06-01-2014, 05:02 PM | #1 |
Senior Member
Join Date: Jan 2012
Location: Beachmere
Car: 1997 BA "The Red Baron"
Posts: 704
|
Stopping The Leak
I seek the knowledge of someone older and wiser
if any has ever tried to put a BG G-series into a BA they will notice the speedo sensor is longer on a BA and that there is a ledge inside the gearbox just beside the diff gear and it stops the Speedo gear from going in properly. ive tried to use multiple o-rings along the whole thing to seal it and no luck, hasnt been too bad for a while but its just getting worse now and there is alot of oil coming out now now could i possibly use some siliocone or instant gasket around the the opening on the gearbox and on the shaft of the Speedo gear and make a seal that way or cut the speedo gear down to make it fit DISCUSS!
__________________
The Red Baron Roses are Red Violets are Blue My Madza 323 Goes... SSSSSSSSTUUTUUTUU |
Sponsored Links |
06-01-2014, 07:12 PM | #2 |
Junior Member
Join Date: Jan 2008
Location: S/E Suburbs
Car: 1991 TX3 KF
Posts: 83
|
Might have to use the bg speedo and get a digital speed converter if all else fails. I did the opposite, put a BA g series gearbox in a BG chassis car (tx3 turbo)
|
|
|