SOLD: [VIC] JIC Magic SA-1 coilovers for BA *sold*

Rupewrecht · 12-12-2005, 11:51 AM

JIC Magic coilovers for BA Hardtop and Hatch

Bought them off the auctions in japan. I've had these sitting in a box for ages. Can't see myself ever putting them on. Dave posting just finally motivated me to post this up

Were sold as having done about 5000kms, and in perfect condition. But i suspect one front might need a rebuild as there is a bit of grease over the bumpstop. Could just be dirty though, as the other front compresses in the same speed/time.

Fronts have adjustable camber plates, rear are static. These are the Adjustable height only SF-1, not the adjustable damper SA-1

Comes with the adjustment spanner - Even with the original JIC Magic box and japanese newspaper.

These will enable you to run wider rims (8"+) as you don't have the spring rests in the way.

Best offer over $950. Even if that front need rebuilding, it's a bargain compared to $2k new

leave a post or pm!

Dogo · 12-12-2005, 01:48 PM

$950.01 ?

CHiMPY · 12-12-2005, 01:49 PM

How much would a rebuild cost?

Dogo · 12-12-2005, 01:52 PM

Quote:

These are the Adjustable height only SA-1, not the adjustable damper SF-1

dan here you say
SF-1 is height only, SA-1 is damper as well

http://www.astinagt.com/forums/showt...&highlight=JIC

which is correct ?

Rupewrecht · 12-12-2005, 04:32 PM

Whoops, thought i had it the right way round. Either way they're height only ones - the SF-1s. First post edited to reflect this!

Boostedbatman said his cost $130 a corner to rebuild

mcwilly · 13-12-2005, 12:14 AM

no chance of them fitting a bg is there?

boostedbatman · 13-12-2005, 05:03 AM

Yep $130 a corner to rebuild
But you WILL find that the rears will be ok and you may only need to do one at the front
When I bought mine, as they were used I decided to rebuild the fronts just to be safe
And now theyre
LIKE NEW***
Stilla bargain though
Grab them somebody and join the growing JIC club
Then lead the twisties on your next cruise

Mad Mat · 13-12-2005, 10:36 AM

i don't think they will fit a bg. they have the wrong concetion plats at the top of the coilcover.

Dogo · 13-12-2005, 11:10 AM

cmon mine mine mine

mcwilly · 13-12-2005, 12:08 PM

i can get custom ones made for just under 450 a corner

CHiMPY · 13-12-2005, 03:40 PM

Quote:

Originally Posted by mcwilly

i can get custom ones made for just under 450 a corner

really...

Rupewrecht · 14-12-2005, 07:41 PM

well, they're Chimpys unless anyone else wants to make a better off

Rupewrecht · 14-12-2005, 09:54 PM

...and now they're Dogos unless etc etc.

the more you spend, the closer my car is to a road!

Dogo · 14-12-2005, 10:16 PM

isnt that what having the coilovers is supposed to do ?

Rupewrecht · 14-12-2005, 10:19 PM

LOL smartass :P

ok, closer to driving under it's own power

mike_d87 · 15-12-2005, 07:23 AM

i wish u posted this like 5 weeks ago, coz i woulda been interested. ive just picked up some whiteline ands kyb gear

oh well

CHiMPY · 15-12-2005, 01:50 PM

So uhh.. Whats the highest bid now?

I have a feeling I am going to have to let Dogo have them..

Rupewrecht · 15-12-2005, 03:01 PM

$1050

CHiMPY · 15-12-2005, 07:14 PM

Bleh. They are all yours Dogo.

Dogo · 15-12-2005, 07:39 PM

1050.01 perhaps ?

12-12-2005, 11:51 AM	#1
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	SOLD: [VIC] JIC Magic SA-1 coilovers for BA sold JIC Magic coilovers for BA Hardtop and Hatch Bought them off the auctions in japan. I've had these sitting in a box for ages. Can't see myself ever putting them on. Dave posting just finally motivated me to post this up Were sold as having done about 5000kms, and in perfect condition. But i suspect one front might need a rebuild as there is a bit of grease over the bumpstop. Could just be dirty though, as the other front compresses in the same speed/time. Fronts have adjustable camber plates, rear are static. These are the Adjustable height only SF-1, not the adjustable damper SA-1 Comes with the adjustment spanner - Even with the original JIC Magic box and japanese newspaper. These will enable you to run wider rims (8"+) as you don't have the spring rests in the way. Best offer over $950. Even if that front need rebuilding, it's a bargain compared to $2k new leave a post or pm! __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1 Last edited by Rupewrecht; 12-12-2005 at 04:33 PM. Reason: SF1...SA1...close enough!

12-12-2005, 01:48 PM	#2
Dogo Senior Member Join Date: Mar 2002 Location: Melb, Aus Car: Mazda 323 BA BPT transplant Posts: 3,459 View Photos By: Dogo	$950.01 ? __________________ [ Turbo BA ] see my readers ride

12-12-2005, 01:49 PM	#3
CHiMPY mew? Join Date: Aug 2004 Location: The winnar is SYDNEY Car: one with 4 wheels... Posts: 784 View Photos By: CHiMPY	How much would a rebuild cost? __________________ "Verily, thou shalt not take unto thine heart any words spoken by the Luser, for I say unto thee, their mouths spout naught but excrement."

12-12-2005, 04:32 PM	#5
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Whoops, thought i had it the right way round. Either way they're height only ones - the SF-1s. First post edited to reflect this! Boostedbatman said his cost $130 a corner to rebuild __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

13-12-2005, 12:14 AM	#6
mcwilly Senior Member Join Date: Jul 2004 Location: newcastle NSW Car: 323 astina Posts: 780 View Photos By: mcwilly	no chance of them fitting a bg is there? __________________ 340KW @ 24psi....................pb 13.3 @ 118mph (3rd gear issues + wheel spin)

13-12-2005, 05:03 AM	#7
boostedbatman Manpink Crusader Join Date: Jun 2004 Location: Stafford, Brisbane Car: 1990 GD mx6 F2T, and soon I might drive the batmoobile once again Posts: 2,280 View Photos By: boostedbatman	Yep $130 a corner to rebuild But you WILL find that the rears will be ok and you may only need to do one at the front When I bought mine, as they were used I decided to rebuild the fronts just to be safe And now theyre LIKE NEW*** Stilla bargain though Grab them somebody and join the growing JIC club Then lead the twisties on your next cruise __________________ The Batmobile as she used to be and now she hangs from a chain in the garage

13-12-2005, 10:36 AM	#8
Mad Mat HONEYWELL REPRESENT Join Date: Aug 2005 Location: Salisbury - Inner City Car: 1997 BA Hardtop - Had a 2003 BJii J48 Sport20, and 2x bg SOHC astina hatches Posts: 5,011 View Photos By: Mad Mat	i don't think they will fit a bg. they have the wrong concetion plats at the top of the coilcover.

13-12-2005, 11:10 AM	#9
Dogo Senior Member Join Date: Mar 2002 Location: Melb, Aus Car: Mazda 323 BA BPT transplant Posts: 3,459 View Photos By: Dogo	cmon mine mine mine __________________ [ Turbo BA ] see my readers ride

13-12-2005, 12:08 PM	#10
mcwilly Senior Member Join Date: Jul 2004 Location: newcastle NSW Car: 323 astina Posts: 780 View Photos By: mcwilly	i can get custom ones made for just under 450 a corner __________________ 340KW @ 24psi....................pb 13.3 @ 118mph (3rd gear issues + wheel spin)

14-12-2005, 07:41 PM	#12
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	well, they're Chimpys unless anyone else wants to make a better off __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

14-12-2005, 09:54 PM	#13
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	...and now they're Dogos unless etc etc. the more you spend, the closer my car is to a road! __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

14-12-2005, 10:16 PM	#14
Dogo Senior Member Join Date: Mar 2002 Location: Melb, Aus Car: Mazda 323 BA BPT transplant Posts: 3,459 View Photos By: Dogo	isnt that what having the coilovers is supposed to do ? __________________ [ Turbo BA ] see my readers ride

14-12-2005, 10:19 PM	#15
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	LOL smartass :P ok, closer to driving under it's own power __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

15-12-2005, 07:23 AM	#16
mike_d87 AstinaGT Regular Join Date: Mar 2005 Location: Newcastle Car: Astina Posts: 481 View Photos By: mike_d87	i wish u posted this like 5 weeks ago, coz i woulda been interested. ive just picked up some whiteline ands kyb gear oh well

15-12-2005, 01:50 PM	#17
CHiMPY mew? Join Date: Aug 2004 Location: The winnar is SYDNEY Car: one with 4 wheels... Posts: 784 View Photos By: CHiMPY	So uhh.. Whats the highest bid now? I have a feeling I am going to have to let Dogo have them.. __________________ "Verily, thou shalt not take unto thine heart any words spoken by the Luser, for I say unto thee, their mouths spout naught but excrement."

15-12-2005, 03:01 PM	#18
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	$1050 __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

15-12-2005, 07:14 PM	#19
CHiMPY mew? Join Date: Aug 2004 Location: The winnar is SYDNEY Car: one with 4 wheels... Posts: 784 View Photos By: CHiMPY	Bleh. They are all yours Dogo. __________________ "Verily, thou shalt not take unto thine heart any words spoken by the Luser, for I say unto thee, their mouths spout naught but excrement."

15-12-2005, 07:39 PM	#20
Dogo Senior Member Join Date: Mar 2002 Location: Melb, Aus Car: Mazda 323 BA BPT transplant Posts: 3,459 View Photos By: Dogo	1050.01 perhaps ? __________________ [ Turbo BA ] see my readers ride

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: [AUS] where to get JIC coilovers ?	Dogo	For Sale/Wanted	5	12-12-2005 10:29 AM
FS: [VIC] LED brake/taillight bulbs - SOLD	Rupewrecht	For Sale/Wanted	19	23-11-2005 10:27 PM
Miscka's turbo astina for sale - For sale	BigBoyLemonade	For Sale/Wanted	57	26-06-2003 08:22 PM