Go Back   AstinaGT Forums > Performance & Technical > Audio Hi-fi

Reply
 
Thread Tools Display Modes
Old 03-02-2004, 11:47 AM   #1
mrpayner
Senior Member
 
mrpayner's Avatar
 
Join Date: Mar 2002
Location: -37.561609, 143.854814
Car: 2013 Mazda 6 GT Sedan - Soul Red
Posts: 3,517
Blue Plugs (and Speaker wire colors for BA)

Hey All..

Is there any way to get the blue plug off the speaker wire for the standard speakers? I noticed that there were some connecting spades in there and was hoping that I may be able to use them once I buy new speakers.

Also.. what coloured wires represent positive and negative in the doors? I noticed that they were all different colours as well

Cheers
AP

**edited for your convenience - AGT Admin**
__________________

2013 Mazda6 Diesel GT ------------------------------------------------------------------------------------------------------------------------------[Formerly] 2004 Mazda6 Luxury Sport
mrpayner is offline   Reply With Quote
Sponsored Links
Old 03-02-2004, 12:40 PM   #2
Dogo
Senior Member
 
Dogo's Avatar
 
Join Date: Mar 2002
Location: Melb, Aus
Car: Mazda 323 BA BPT transplant
Posts: 3,458
stanley knife and cut it ?

cant remember wire colors off the top of my head.
__________________
[ Turbo BA ]
see my readers ride
Dogo is offline   Reply With Quote
Old 03-02-2004, 12:46 PM   #3
Cosmo Dude
コスモ
 
Cosmo Dude's Avatar
 
Join Date: Dec 2002
Location: Location: Vic
Car: Mazda '95 Astina I4, '86 B2K and '10 3 MZR-CD
Posts: 7,881
For the front doors I made adaptor leads, Narva make the two pin plug and the speaker end I used spade terminals, then I put heatshrink over them to stop them falling out again ops: I have the corect terminating tool to do this

Front Right -ve Green/Yellow
Front Right +ve Red/Yellow

Front Left -ve Violet
Front Left +ve Blue/Orange

Rear Door Hatch -ve Orange
Rear Door Hatch +ve Yellow
Both doors utilize the same colours

Rear Right H/top -ve Orange
Rear Right H/top +ve Yellow

Rear Left H/top -ve Green/Black
Rear Left H/top +ve Green/Orange
You would need to know this at the headunit end for both
__________________
My 'stina Hatch
Cosmo Dude is offline   Reply With Quote
Old 03-02-2004, 07:44 PM   #4
mrpayner
Senior Member
 
mrpayner's Avatar
 
Join Date: Mar 2002
Location: -37.561609, 143.854814
Car: 2013 Mazda 6 GT Sedan - Soul Red
Posts: 3,517
Quote:
Originally Posted by Dogo
stanley knife and cut it ?
Heh.. actually.. I had just thought about this at work.

I'll buy some more male/female spades.. make up a 5cm cable with a male spade at one end, the female at the other [with the right sizes for the new speaker] and just clip them into the blue plug. Problem solved, and i don't have to cut off the blue plug so I can put the stock speakers back in the car when I sell it.

Thanks for the colours too Rod..
AP
__________________

2013 Mazda6 Diesel GT ------------------------------------------------------------------------------------------------------------------------------[Formerly] 2004 Mazda6 Luxury Sport
mrpayner is offline   Reply With Quote
Old 03-02-2004, 09:13 PM   #5
KittyKatSmack
Banned
 
KittyKatSmack's Avatar
 
Join Date: Mar 2003
Location: Australia
Car: Mazda
Posts: 3,961
Maybe someone should put that colour info in a sticky somewhere???

It's a question that is bound to be asked again.......

Just a thought.
KittyKatSmack is offline   Reply With Quote
Old 20-05-2004, 03:38 PM   #6
mutek
Junior Member
 
Join Date: Mar 2004
Posts: 47
i found these out the hard way by using a mulitmeter ... its so ****ed though colours at speakers is different colours at headunit ... why would they do this ???
mutek is offline   Reply With Quote
Old 20-05-2004, 03:49 PM   #7
Cosmo Dude
コスモ
 
Cosmo Dude's Avatar
 
Join Date: Dec 2002
Location: Location: Vic
Car: Mazda '95 Astina I4, '86 B2K and '10 3 MZR-CD
Posts: 7,881
Quote:
Originally Posted by mutek
i found these out the hard way by using a mulitmeter ... its so ****ed though colours at speakers is different colours at headunit ... why would they do this ???
Different suppliers and different contracts. The back doors have the same loom to save some money.

If all else fails then MAZDA
__________________
My 'stina Hatch
Cosmo Dude is offline   Reply With Quote
Old 03-06-2004, 02:27 PM   #8
Cosmo Dude
コスモ
 
Cosmo Dude's Avatar
 
Join Date: Dec 2002
Location: Location: Vic
Car: Mazda '95 Astina I4, '86 B2K and '10 3 MZR-CD
Posts: 7,881
The plugs to the stockie radio are the same on the BG and BA.
The colours change when different sub contractors make different sections of the wiring looms over the years.

Here goes...

2A +12V from ignition
2B No connection
2C +12V from battery
2D To antenna
2E Dash illumination
2F
2H No connection
2J To center speaker amplifier
2K Left frount speaker +
2L Left frount speaker -
2M Right frount speaker +
2N Right frount speaker -

3A Left rear speaker +
3B Left rear speaker -
3C No connection
3D No connection
3F Right rear speaker +
3H Right rear speaker -
3I No connection
3J No connection

4A Earth

Code:
[2A][2C][2E] | [XX][XX] | [2K][2M]      [3A][3C] | [**][**] | [3I]
[2B][2D][2F] | [2H][2J] | [2L][2N]      [3B][3D] | [3F][3H] | [3J]     [4A]

ISO pin-out
If you understand the diagram then you can write down the colours before cutting them from the plug.
__________________
My 'stina Hatch
Cosmo Dude is offline   Reply With Quote
Old 03-06-2004, 06:06 PM   #9
Dogo
Senior Member
 
Dogo's Avatar
 
Join Date: Mar 2002
Location: Melb, Aus
Car: Mazda 323 BA BPT transplant
Posts: 3,458
printer friendly :

http://www.astinagt.com/323stereowiring.pdf
__________________
[ Turbo BA ]
see my readers ride
Dogo is offline   Reply With Quote
Old 04-02-2005, 12:56 AM   #10
scrooge
Junior Member
 
Join Date: Feb 2005
Location: Oatlands, NSW
Posts: 3
Hi, this is my first post but i'm already a huge fan of this forum.

Thanks for the diagram. Refering to the centre channel, i'm hoping to use it as a speaker for my hands free car kit. THe harness has only 1 output for the centre amp, is that a remote power on? I dont think anyone actually mentioned whether they knew or not? Otherwise i was thinking of just supplying 12v+ and see if it turns on and produces something... Suppose i could plug the stock HU back in and find my multimeter...

btw, i've read the topics http://www.astinagt.com/forum/viewtopic.php?t=1135 & http://www.astinagt.com/forum/viewtopic.php?t=1301

ta
scrooge is offline   Reply With Quote
Old 04-02-2005, 08:22 AM   #11
Dogo
Senior Member
 
Dogo's Avatar
 
Join Date: Mar 2002
Location: Melb, Aus
Car: Mazda 323 BA BPT transplant
Posts: 3,458
i cant remember if that output to the centre speaker is a negative or positive trigger.

my wiring diagrams are at home so i can check tonight tho.

i would ground that wire and see if it turns the amp on, before giving it 12v+. That way you avoid risking short circuiting the amp.
Dogo is offline   Reply With Quote
Old 30-12-2009, 08:57 PM   #12
newmazdaman
Junior Member
 
Join Date: Dec 2009
Location: Brisbane
Car: Mazda
Posts: 2
are they the same

Hi all,

I had a mazda astina but now have a 1995 626 and I cannot find any info on wiring diagrams for the stereo. I was wondering if the diagram you have hear on this post would be similar to the 626. the pin setup is the same with the double plugsand the wire placements seem to be the same but colours vary slightly. Does anyone know if there is a similar site or diagram for my model.

thanks for anyone who posts help.

M.
newmazdaman is offline   Reply With Quote
Old 30-12-2009, 10:09 PM   #13
Rupewrecht
Administrator
 
Rupewrecht's Avatar
 
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,494
Quote:
Originally Posted by newmazdaman View Post
Hi all,

I had a mazda astina but now have a 1995 626 and I cannot find any info on wiring diagrams for the stereo. I was wondering if the diagram you have hear on this post would be similar to the 626. the pin setup is the same with the double plugsand the wire placements seem to be the same but colours vary slightly. Does anyone know if there is a similar site or diagram for my model.

thanks for anyone who posts help.

M.
You might want to try http://www.mx6.com/
__________________

jdmparts.rupewrecht.com
Sourcing your not-quite-overnight parts from Japan

WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1


Rupewrecht is offline   Reply With Quote
Old 30-12-2009, 10:52 PM   #14
newmazdaman
Junior Member
 
Join Date: Dec 2009
Location: Brisbane
Car: Mazda
Posts: 2
Thanks again

Thanks for the links found exactly what i needed not sure why google and other search engines didnt pick up those posts.

Cheers

M.
newmazdaman is offline   Reply With Quote
Old 10-05-2010, 12:25 AM   #15
zoolanda
Junior Member
 
Join Date: May 2010
Location: Melbourne
Car: 96' 323 BA Series 2
Posts: 42
hey guys this really helped me with my HU, ready hard with diff colours. makes it frustrating, but the diagram helped heaps, cheers cosmo!!

now i got a mint pioneer HU for me BA WOOO!
zoolanda is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Just replaced some speaker wire :S andrewgrazier Audio Hi-fi 8 29-01-2005 12:03 AM
Should I run new speaker wire? MarkyMark Audio Hi-fi 10 14-04-2004 01:27 PM


All times are GMT +10. The time now is 11:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
2001- 2010 AstinaGT