|
12-11-2012, 03:22 PM | #1 |
Junior Member
Join Date: Nov 2012
Location: New Zealand
Car: Mazda GTR
Posts: 37
|
FS: [NZ] VERY Rare Astina/Eunos Digital Cluster
Hey guys,
I have a VERY rare Astina/Eunos JDM digital instrument cluster for sale. Still in excellent working condition. Was removed yesterday from an Astina which had been in a rear-end crash, so no damage to the cluster and it hasn't been sitting around unused. No cracks, chips, scratches etc. As far as I know these are a 100% plug-and-play swap with your existing analogue cluster. I have personally tried plugging the analogue plugs into the back of this unit and they're identical. Cable driven speedo, just like the analogue one. The fuel sender should also be identical, but as a precautionary measure I'm including the fuel sender and plugs just in case. Here's the opportunity to buy one of (if not) the rarest optional extras Mazda ever produced for this model. Make your friends green with envy and take the chance to go digital today Shipping available worldwide. Please ask for a no obligation shipping quote to your country. Price: $500 NZD ($408 AUD) + shipping. Conversions into other currencies can be done for free at www.xe.com - edit: Sold! As mentioned above, it's in absolutely excellent condition. Please note that the line on the left side of the cluster seen in photos 1 & 3 is NOT a crack, it is merely a reflection of the reset button for the clock. Please refer to photos 2 & 4. Any questions welcome Last edited by Full-Throttle; 15-11-2012 at 05:53 AM. |
Sponsored Links |
12-11-2012, 05:21 PM | #2 |
AstinaGT Regular
Join Date: Dec 2002
Location: Sydney Australia
Car: Mazda BG Familia GTR
Posts: 259
|
I wouldn't mind getting this dash if it was bit cheaper but I know they are pretty rare item. Good luck with the same
By the way what camera did you use to take these pics? They look great.... |
12-11-2012, 05:25 PM | #3 |
Junior Member
Join Date: Nov 2012
Location: New Zealand
Car: Mazda GTR
Posts: 37
|
|
13-11-2012, 07:25 AM | #4 |
Junior Member
Join Date: Nov 2012
Location: New Zealand
Car: Mazda GTR
Posts: 37
|
The speedo is now all packaged up and ready to be shipped. Please inquire for a no obligation shipping quote to your country. I can find out for you in a matter of minutes using the online rate finder (very accurate).
|
13-11-2012, 02:55 PM | #5 |
Junior Member
Join Date: Sep 2009
Location: Sydney
Car: Mazda 6 MPS
Posts: 75
|
Will this fit on a 323 BG model 1991?
|
13-11-2012, 03:06 PM | #6 |
Banned
Join Date: May 2006
Location: Brisneyland, Queensland
Car: 2002 Mazda Frankenstina
Posts: 2,868
|
It came from a BG Astina so it should fit it.
|
13-11-2012, 03:15 PM | #7 |
Junior Member
Join Date: Sep 2009
Location: Sydney
Car: Mazda 6 MPS
Posts: 75
|
Mine is like that though...
http://www.google.com.au/imgres?um=1...9,r:3,s:0,i:78 |
13-11-2012, 03:26 PM | #8 |
Junior Member
Join Date: Nov 2012
Location: New Zealand
Car: Mazda GTR
Posts: 37
|
As far as I know it won't fit the 323 BG Familias sorry. The Astinas and 323s use a slightly different shaped cluster and mounting brackets. You could make it fit if you really wanted, but if you bolt it straight in place of the 323 cluster there will be gaps around the sides.
|
13-11-2012, 03:31 PM | #9 |
Junior Member
Join Date: Sep 2009
Location: Sydney
Car: Mazda 6 MPS
Posts: 75
|
Thats what I thought as well...You can see it from the pics...Bugger...
|
13-11-2012, 03:40 PM | #10 |
Junior Member
Join Date: Nov 2012
Location: New Zealand
Car: Mazda GTR
Posts: 37
|
For anyone wondering what this unit looks like installed and operating here's a photo of one in action (pic borrowed from a thread here on AstinaGT) -
|
13-11-2012, 03:49 PM | #11 |
Junior Member
Join Date: Sep 2009
Location: Sydney
Car: Mazda 6 MPS
Posts: 75
|
Full-Throttle you are mean! :-P Why are you doing this to me????
|
13-11-2012, 03:55 PM | #12 |
Junior Member
Join Date: Nov 2012
Location: New Zealand
Car: Mazda GTR
Posts: 37
|
|
13-11-2012, 04:08 PM | #13 |
Junior Member
Join Date: Sep 2009
Location: Sydney
Car: Mazda 6 MPS
Posts: 75
|
Its so nice... :-( Any ideas how this might fit?
|
13-11-2012, 04:38 PM | #15 |
Junior Member
Join Date: Sep 2009
Location: Sydney
Car: Mazda 6 MPS
Posts: 75
|
I looked on the net.Astina dash is more round than the familia
|
13-11-2012, 05:20 PM | #16 |
Junior Member
Join Date: Nov 2012
Location: New Zealand
Car: Mazda GTR
Posts: 37
|
I just spoke to a friend of mine and he recalled seeing a thread on a New Zealand forum where a guy over here installed one of these digital clusters into his 323 Infini sedan. Apparently the wiring wasn't plug-and-play like it is with the Astina/Eunos 100 but wasn't hard to do since the pin-outs for the wires are actually written on the back of the cluster from factory.
I did some hunting around online and managed to find the thread that my friend was speaking of. The guy who did the swap into his 323 Familia posted some photos (albeit blurry ones) and even a video. Unfortunately he didn't post any photos of the finished result with the plastic surround fitted, but from what I've read elsewhere, the 323 Familia surround requires trimming in order to fit properly as the cluster is too large for the surround (not the opposite way around like I initially though, so there won't be gaps on the sides afterall). Here a link to the video and some pics: Video: http://s1139.photobucket.com/albums/...psd0d0a2f6.mp4 Pics: |
13-11-2012, 06:29 PM | #17 |
Senior Member
Join Date: May 2005
Location: Sydney Lakemba
Car: mx-6 626 Gs300 Maz2 was 95 KF BA-HT
Posts: 2,024
|
I am sorry but I think oyu have models mixed up
This unit looks to me like the BG chssis Eunos 100 model or Astina SP 323 we got here. EG - pop up headlight front end and if so it should fit across. I don't know if BG's had major changes in the Production run between 1st and 2nd series like previous or other models. It won't fit a BG familia sedan Yes thats is true. I d buy it if I had a BG Dam I would. |
13-11-2012, 06:48 PM | #18 | |
Junior Member
Join Date: Nov 2012
Location: New Zealand
Car: Mazda GTR
Posts: 37
|
Quote:
So just to clear up any confusion: Yes, this will fit the BG Astina and Eunos 100 models. 100% plug-and-play, bolt-in. No, it won't fit the BG Familia sedan/hatch. It can be made to fit with some rewiring, different brackets and modification to the plastic surround but it isn't a bolt-in replacement like it is on the Astina and Eunos 100 models. |
|
13-11-2012, 07:50 PM | #19 |
Junior Member
Join Date: Sep 2009
Location: Sydney
Car: Mazda 6 MPS
Posts: 75
|
Full-Throttle post the links of the threads that you found. Its not impossible by the looks of it but more info would be good
|
13-11-2012, 07:53 PM | #20 | |
Junior Member
Join Date: Nov 2012
Location: New Zealand
Car: Mazda GTR
Posts: 37
|
Quote:
http://www.amazd.co.nz/forum/viewtop...23745&start=60 |
|
Tags |
cluster, digital, rare, speedometer, tacho |
|
|