|
16-05-2020, 04:02 PM | #1 |
Junior Member
Join Date: May 2020
Location: Perth
Car: Mazda 232 Astina
Posts: 1
|
Brake problem!
Hi an thank you to the forum,
So hoping for some advice on why my brakes have stopped working please. Brakes was working fine when I parked car up after drive home from work, going back to work the next morning the brake pedal travelled to the floor and the brakes only just worked . Upon inspection I found the brake reservoir to be low and the back drivers side calliper looked a bit wet so I guessed that's where the fluid went! So I got a new calliper an fitted it bled brakes all round just as a service measure and the problem still present . Net step Change Brake master cylinder but the problem is still present . The brakes still work a small amount when the pedal is on the floor but no power in them at all . I can only think of the brake booster not working properly . No obvious leaks now I have changed the rear calliper . Any suggestions most welcome . Thanks Mike 323 Astina 2003 disc brake all round, auto trans. |
Sponsored Links |
Tags |
brakes, problems |
|
|