bpd-bp wiring

89sp1.8 · 10-10-2007, 07:37 PM

hey guys
need help with wiring..this is a diffrent case..
a bp dohc engine (n/a) ,into a gtr familia..
need to find out asap which wires to splice to do with fuel pump relay etc,
all input appreciated
thanx

newman · 10-10-2007, 07:54 PM

http://www.astinagt.com/forums/showthread.php?t=9973

99% certain the BPD and BPT are the same when it come to fuel relay

Dogo · 10-10-2007, 08:57 PM

you're downgrading to from BPD to an n/a BP ?

thats going to be so depressing

Is the BP from a BG or BA ?

89sp1.8 · 10-10-2007, 09:08 PM

yeah only thing is the bpd wiring doesnt seem to have the black/pink wire in white plug dash loom..and not sure about the bp engine, green/pink wire doesnt seem to be in bp loom.

weird doing this the opposite way and into bpd instead of bpt. hehe
appreciate the reply..will go over the link a few times see wat come up with

89sp1.8 · 10-10-2007, 09:10 PM

its bg bp,and ijust ah temp setup for the familia till can be swapped bak.

newman · 10-10-2007, 11:25 PM

righto, well there should be a green with red stripe on the GTR loom interior side (loom with the black plug)

and you will need to splice that wire into black with pink strip on the BP loom (white plug) engine loom side

its the same as a BP n/a to GTX/GTR accept inverse

the required pictures showing hte wires are in the thread i said before. you have have to inverse it as your doing the process backwards so to speak...

89sp1.8 · 13-10-2007, 03:24 PM

ok found the black pink wires in bp loom and linked it with green/pink from fuel pump,all good now

cheers for input newman/everyone

MAZGTR · 13-10-2007, 09:37 PM

you mean the black/pink wire to the fuel pump relay and then to the thick green/red wire on the fuel pump. Thanks 89sp1.8

10-10-2007, 07:37 PM	#1
89sp1.8 Senior Member Join Date: May 2005 Location: brisbane Car: bg astina Posts: 1,186	bpd-bp wiring hey guys need help with wiring..this is a diffrent case.. a bp dohc engine (n/a) ,into a gtr familia.. need to find out asap which wires to splice to do with fuel pump relay etc, all input appreciated thanx

10-10-2007, 08:57 PM	#3
Dogo Senior Member Join Date: Mar 2002 Location: Melb, Aus Car: Mazda 323 BA BPT transplant Posts: 3,459 View Photos By: Dogo	you're downgrading to from BPD to an n/a BP ? thats going to be so depressing Is the BP from a BG or BA ? __________________ [ Turbo BA ] see my readers ride

10-10-2007, 07:54 PM	#2
newman Banned Join Date: Mar 2005 Location: Brisbane Car: KF Laser fwd BPT Posts: 707	http://www.astinagt.com/forums/showthread.php?t=9973 99% certain the BPD and BPT are the same when it come to fuel relay

10-10-2007, 09:08 PM	#4
89sp1.8 Senior Member Join Date: May 2005 Location: brisbane Car: bg astina Posts: 1,186	yeah only thing is the bpd wiring doesnt seem to have the black/pink wire in white plug dash loom..and not sure about the bp engine, green/pink wire doesnt seem to be in bp loom. weird doing this the opposite way and into bpd instead of bpt. hehe appreciate the reply..will go over the link a few times see wat come up with

10-10-2007, 09:10 PM	#5
89sp1.8 Senior Member Join Date: May 2005 Location: brisbane Car: bg astina Posts: 1,186	its bg bp,and ijust ah temp setup for the familia till can be swapped bak.

10-10-2007, 11:25 PM	#6
newman Banned Join Date: Mar 2005 Location: Brisbane Car: KF Laser fwd BPT Posts: 707	righto, well there should be a green with red stripe on the GTR loom interior side (loom with the black plug) and you will need to splice that wire into black with pink strip on the BP loom (white plug) engine loom side its the same as a BP n/a to GTX/GTR accept inverse the required pictures showing hte wires are in the thread i said before. you have have to inverse it as your doing the process backwards so to speak...

13-10-2007, 03:24 PM	#7
89sp1.8 Senior Member Join Date: May 2005 Location: brisbane Car: bg astina Posts: 1,186	ok found the black pink wires in bp loom and linked it with green/pink from fuel pump,all good now cheers for input newman/everyone

13-10-2007, 09:37 PM	#8
MAZGTR Junior Member Join Date: Jun 2007 Location: Brisbane Car: Mazda Familia GTR Posts: 14	you mean the black/pink wire to the fuel pump relay and then to the thick green/red wire on the fuel pump. Thanks 89sp1.8