|
21-09-2014, 03:53 PM | #1 |
Junior Member
Join Date: Apr 2014
Location: sydney
Car: 2003 mazda 323 sp20 protege
Posts: 15
|
seatbelt retracted to far...
Hey guys,
Just finished my coilover install on my 03 protege sp20 and the rear seatbelts have retracted down to far and are now stuck so i cant get them back up to bolt them in. Anyone know how to fix this ? Thanks |
Sponsored Links |
21-09-2014, 04:26 PM | #2 |
Senior Member
|
You need to hold the unit upright so that the lock will release and feed the belt out.
__________________
http://www.astinagt.com/forums/showthread.php?t=18798 WORKLOG |
23-09-2014, 08:30 AM | #3 |
Senior Member
Join Date: Feb 2010
Location: USA
Car: .
Posts: 2,623
|
lol
I see this question a lot... to prevent this, one should simply pull the seat belt spool out and stuff the reel through the front seat head rest and then put the head rest back down now, if you didn't do that... you will need to get the reel perfectly level with the ground to allow you to pull it out as JDM323 said.... you will need to slowly tilt it while pulling to test if it will let you pull it out... it's trial and error why this happened? simple answer... vehicle roll over protection...
__________________
Protege FAQ, the best 323/Protege/Mazda3 resource enjoyed worldwide for 10 years |
|
|