Go Back   AstinaGT Forums > AstinaGT Talk > Motorsports

Reply
 
Thread Tools Display Modes
Old 27-07-2011, 11:16 AM   #1
astina_hardtop97
Junior Member
 
astina_hardtop97's Avatar
 
Join Date: Jul 2007
Location: Sydney
Car: Turbo v8 and 1.8l 323
Posts: 87
BA Hardtop Wheel alignment specs for track day

does anyone know what wheel alignment specs i can use for a 30mm lowered BA hardtop with stock suspension?
front and rear specs please...

do i need to get aftermarket camber and caster kits or is ther a bit of adjustment in the factory suspension?

Cheers
astina_hardtop97 is offline   Reply With Quote
Sponsored Links
Old 27-07-2011, 01:35 PM   #2
Rupewrecht
Administrator
 
Rupewrecht's Avatar
 
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
As much camber as you can get with the stock setup...which is pretty much nothing. Ideally you'll need some camber bolts front and rear.

This'll give you 1.5-2° that is what you want on the front, and about the same at the rear.

For more front caster you'll need new lower control arm bushes.
__________________

jdmparts.rupewrecht.com
Sourcing your not-quite-overnight parts from Japan

WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1


Rupewrecht is offline   Reply With Quote
Old 27-07-2011, 06:32 PM   #3
project.r.racing
Senior Member
 
project.r.racing's Avatar
 
Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,929
for a street usable stock setup:-
front toe -0.5mm
front camber -1.0d
rear toe -0.0mm
rear camber -0.5d

but you'll just have the ability to adjust the toe only.
project.r.racing is offline   Reply With Quote
Old 27-07-2011, 07:27 PM   #4
Cosmo Dude
コスモ
 
Cosmo Dude's Avatar
 
Join Date: Dec 2002
Location: Location: Vic
Car: Mazda '95 Astina I4, '86 B2K and '10 3 MZR-CD
Posts: 7,888
Most wheel alignment shops will only align to what the computer tells them, that way they can't be blamed for tyre wear issues. I've given first bornes and signed stat decs to have small camber changes made that are within Mazda specs.
I recomend starting with -1.2 deg front camber (-0.2deg from factory) as a first setting. It will give the front a bit more bite into corners without suprize understeer.
Most of these settings will need to be tuned to your driving style over time.
__________________
My 'stina Hatch
Cosmo Dude is offline   Reply With Quote
Old 28-07-2011, 07:10 AM   #5
project.r.racing
Senior Member
 
project.r.racing's Avatar
 
Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,929
i'm paying the money, they do what i want. i've never had any issues about what alignment settings i have requested.
project.r.racing is offline   Reply With Quote
Old 15-08-2011, 03:38 PM   #6
astina_hardtop97
Junior Member
 
astina_hardtop97's Avatar
 
Join Date: Jul 2007
Location: Sydney
Car: Turbo v8 and 1.8l 323
Posts: 87
thanks for the replies, now as for tyres
i'm getting toyo ra1's in 205/40r17 as these where cheap and the right size for the front, as for rears i have 225/45r17 in a very hard cheap chinese tyre (40,000km and still looks new)
should i leave these for the wakefeild day or should i put some old r compound semi-slicks in 245/40r17 i have off my old ford? they should fit under the rear guards but should i bother?
my car is dead stock so not real fast
astina_hardtop97 is offline   Reply With Quote
Old 15-08-2011, 06:25 PM   #7
alex_d
Junior Member
 
alex_d's Avatar
 
Join Date: Jun 2008
Location: Australia
Car: 2010 Mitso Trition & 1995 323 Astina
Posts: 94
Don't know how much a hardtop setup for the track would differ to a hatch, but i run the following which i have found is the best setup for me as far as handling, driving style and tyre wear is concerned:

Front
-2.5 camber
+0.5mm toe

Rear
-0.5 camber
0.0mm toe

245's for my thinking is gonna be tough to fit under the guards unless there is way more room under a hardtop. I just put 225's under the hatch and i only have a fingers width between the guard and the strut.

From experience without stiffer suspension and some decent camber on the front your tyres will end up with some heavily worn outer shoulders especially around a tight circuit like wakefield. The understeer is gonna chew them up. My advice would be just chew up some cheapies.

I have a set of camber bolts i can sell you and if you have any troubles with getting the adjustments done, the guy who sets up my car can do it.
__________________
NSWSSC 2010 Class 2B
Round 1 Oran Park GP: 1.30.629
Round 2 Eastern Creek: 2.04.999
Round 3 Wakefield Park: 1.17.441
OMC Track Day 2010 Wakefield Park: 1.16.305
Private Practice MAR 2011 Wakefield Park 1.15.8
alex_d is offline   Reply With Quote
Old 16-08-2011, 07:48 AM   #8
astina_hardtop97
Junior Member
 
astina_hardtop97's Avatar
 
Join Date: Jul 2007
Location: Sydney
Car: Turbo v8 and 1.8l 323
Posts: 87
car is pretty stiff on 30mm lowered selby springs and new ebay shocks, 5 x 6 lap runs so tyre wear should be ok, i haven't checked clearance to my strut on the rear with my 225's but it will be the same as a hatch so prob won't fit 245's in there.
how much for your camber bolts?
astina_hardtop97 is offline   Reply With Quote
Old 16-08-2011, 08:26 AM   #9
alex_d
Junior Member
 
alex_d's Avatar
 
Join Date: Jun 2008
Location: Australia
Car: 2010 Mitso Trition & 1995 323 Astina
Posts: 94
PM'd
__________________
NSWSSC 2010 Class 2B
Round 1 Oran Park GP: 1.30.629
Round 2 Eastern Creek: 2.04.999
Round 3 Wakefield Park: 1.17.441
OMC Track Day 2010 Wakefield Park: 1.16.305
Private Practice MAR 2011 Wakefield Park 1.15.8
alex_d is offline   Reply With Quote
Old 16-08-2011, 09:44 AM   #10
Doctor Shifty
Junior Member
 
Join Date: Sep 2010
Location: Newcastle NSW
Car: V6 Hardtop & Outback
Posts: 36
On our previous hardtop we had basic Whiteline stuff installed, stiffer rear sway bar and camber bolts all round. They then did a mild sport wheel alignment. The difference was amazing. One of the adjustments they did was a bit of rear toe out. The effect of that was when loading the outer wheels in a corner it brought the rear around better. The car had 'Granny spec' understeer from new but the new wheel alignment set it up totally neutral and heaps of fun.

The camber bolts back then were $12 each as I remember.

We had very slight inner tyre wear on the front, which they warned us about. It was worth that for the handling difference, even though the tyre places didn't like it.

We now have another hardtop and are looking to do the same thing to it.
Doctor Shifty is offline   Reply With Quote
Old 16-08-2011, 10:19 AM   #11
alex_d
Junior Member
 
alex_d's Avatar
 
Join Date: Jun 2008
Location: Australia
Car: 2010 Mitso Trition & 1995 323 Astina
Posts: 94
Quote:
Originally Posted by Doctor Shifty View Post
The camber bolts back then were $12 each as I remember.
For $12 doubt they were genuine whitelines unless you got a super deal. Whitlines are $80 and I paid only a little under that for mine.
__________________
NSWSSC 2010 Class 2B
Round 1 Oran Park GP: 1.30.629
Round 2 Eastern Creek: 2.04.999
Round 3 Wakefield Park: 1.17.441
OMC Track Day 2010 Wakefield Park: 1.16.305
Private Practice MAR 2011 Wakefield Park 1.15.8
alex_d is offline   Reply With Quote
Old 24-08-2011, 07:03 PM   #12
Doctor Shifty
Junior Member
 
Join Date: Sep 2010
Location: Newcastle NSW
Car: V6 Hardtop & Outback
Posts: 36
Very likely my memory is not too trustworthy on the $12, I noticed their new price when i went looking. Numbers and me, we are not the best of friends.

However, this work was done about 1999/2000 so in those years prices would have seen some increase.
Doctor Shifty is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 07:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2001- 2010 AstinaGT