is it normal ?

lightwander · 12-09-2010, 07:31 PM

ok i just put a new engine on my astina v6 auto 95 2.0L and iam not sure if this is normal but my rav was sitting at 2 while doing 100 and now it kinda going over it 2 , and when i have the car standing still it sit at 1 rav

Clean_Cookie · 12-09-2010, 08:15 PM

umm not possible if the same gearbox has been used... thats what determines the revolutions per minute(Revs - not ravs!) idling speed is adjustable. should be 800 +/-50

hope this helps.

Clean_Cookie · 12-09-2010, 08:48 PM

may or may not help but here you go?

lmk if you want anything else from the manual! paid for it, may as well use it

they are testing the transmission... see if you get the results mentioned.

lightwander · 12-09-2010, 08:49 PM

the gearbox is still the same only the engine is new , i just had a look at the revs again and it looks like it sitting at 800 , it just i dont understand why the revs was more tonight then it used to because last nite it was sitting at 2 while i was doing 100 and tonight it was over 2 .

70NYD · 12-09-2010, 08:54 PM

is your torque converter full of transmition fluid??? might be slipping..

Clean_Cookie · 12-09-2010, 08:55 PM

not possible unless something really really bad is goin on in your gearbox! id guess it would be over 2 anyway. (wish i could have 2000 in 5th @ 100km/hr
if you refresh the screen i reuploaded them into a bigger size to make it readable too.)

70NYD · 12-09-2010, 09:07 PM

did u press the OD button.. lol im just fishing here..

lightwander · 12-09-2010, 10:22 PM

ok i took some pics guys iam talking about when iam in the highway here ,
standing still photo

this was at the highway

lightwander · 12-09-2010, 10:24 PM

it problly fine and iam just seeing things

Ghoru · 12-09-2010, 10:28 PM

just sounds like it couldnt pick a gear

lightwander · 12-09-2010, 10:29 PM

yeah i notice something as well i it was at 80 at the rev was at 3 then all the sudden it drop it down to 2 while trying to go to 100 then stay around the 2s

Ghoru · 12-09-2010, 10:32 PM

jus sounds like your gears changed to me....

lightwander · 12-09-2010, 10:34 PM

so it normal and iam just over looking into things ?

70NYD · 12-09-2010, 10:36 PM

when you put the new engine in, did u overtighten the kickback cable??
still fishing here

lightwander · 12-09-2010, 10:38 PM

lol omfg i read that all wrong yeah it fine all good it just started tonight with the revs

Noble323 · 13-09-2010, 12:50 AM

Manual would be different as you can change to 5th gear i think or even 4th has different ratio to automatic

But anyways i owned 3 hardtop astina v6 (Automatics not manual) and when at 100km it was all just under 3000rpm

So i would say its normal champ - or 3 of my hardtops were stuff, which i dont think so .

So my guess its all normal nothing to worry about

if yours is a auto, cause wouldnt have a clue what it sits on manual

Is yours a auto ?

lightwander · 13-09-2010, 01:08 AM

yeah it's auto so everything normal ? u think from the pics

Ghoru · 13-09-2010, 06:11 PM

in my manual corolla it sits about 1800 in 5th @100kmh so i would imagine a 3 speed auto wouldnt differ too much

Noble323 · 13-09-2010, 07:23 PM

lol,

of course it would be different in 5th gear on manual would be a big difference in auto on 3rd gear, the 3speed would be rev'n harder

looking at those pictures its looks fine for a 4speed auto v6 ba astina.

like i said i had 3 auto v6's and all the same as yours, so i think its normal, if there was a auto and 5 speed on these ba's chances are it would sit between 2000-2500 @ 100kms

i mean i could be wrong on the 5th gear auto thing, but regarding your question, its normal at those pictures

12-09-2010, 07:31 PM	#1
lightwander Junior Member Join Date: Mar 2010 Location: vic melbourne Car: astina 1995 Posts: 14	is it normal ? ok i just put a new engine on my astina v6 auto 95 2.0L and iam not sure if this is normal but my rav was sitting at 2 while doing 100 and now it kinda going over it 2 , and when i have the car standing still it sit at 1 rav

12-09-2010, 08:15 PM	#2
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	umm not possible if the same gearbox has been used... thats what determines the revolutions per minute(Revs - not ravs!) idling speed is adjustable. should be 800 +/-50 hope this helps. __________________ Worklog

12-09-2010, 08:48 PM	#3
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	may or may not help but here you go? lmk if you want anything else from the manual! paid for it, may as well use it they are testing the transmission... see if you get the results mentioned. __________________ Worklog

12-09-2010, 08:54 PM	#5
70NYD Veni, vidi, vici Join Date: Mar 2008 Location: Brisbane Car: 1996 BA Hatch & 2005 RX8 Posts: 4,911 View Photos By: 70NYD	is your torque converter full of transmition fluid??? might be slipping.. __________________

12-09-2010, 08:55 PM	#6
Clean_Cookie obsessed-incomplete-broke Join Date: Oct 2008 Location: Brisbane Car: BA Hardtop/Hatch Posts: 5,441	not possible unless something really really bad is goin on in your gearbox! id guess it would be over 2 anyway. (wish i could have 2000 in 5th @ 100km/hr if you refresh the screen i reuploaded them into a bigger size to make it readable too.) __________________ Worklog

12-09-2010, 08:49 PM	#4
lightwander Junior Member Join Date: Mar 2010 Location: vic melbourne Car: astina 1995 Posts: 14	the gearbox is still the same only the engine is new , i just had a look at the revs again and it looks like it sitting at 800 , it just i dont understand why the revs was more tonight then it used to because last nite it was sitting at 2 while i was doing 100 and tonight it was over 2 .

12-09-2010, 09:07 PM	#7
70NYD Veni, vidi, vici Join Date: Mar 2008 Location: Brisbane Car: 1996 BA Hatch & 2005 RX8 Posts: 4,911 View Photos By: 70NYD	did u press the OD button.. lol im just fishing here.. __________________

12-09-2010, 10:22 PM	#8
lightwander Junior Member Join Date: Mar 2010 Location: vic melbourne Car: astina 1995 Posts: 14	ok i took some pics guys iam talking about when iam in the highway here , standing still photo this was at the highway

12-09-2010, 10:24 PM	#9
lightwander Junior Member Join Date: Mar 2010 Location: vic melbourne Car: astina 1995 Posts: 14	it problly fine and iam just seeing things

12-09-2010, 10:28 PM	#10
Ghoru Senior Member Join Date: Jun 2009 Location: Rockhampton Car: '92 BG Astina Sp Posts: 999 View Photos By: Ghoru	just sounds like it couldnt pick a gear __________________ BG Astina - work in progress.... Scooters are like fat chicks, fun to ride until your mates find out... NOS is like a hot chick with AIDS, you know you wanna hit that,your just afraid of the consequences... http://www.eveonline.com/

12-09-2010, 10:29 PM	#11
lightwander Junior Member Join Date: Mar 2010 Location: vic melbourne Car: astina 1995 Posts: 14	yeah i notice something as well i it was at 80 at the rev was at 3 then all the sudden it drop it down to 2 while trying to go to 100 then stay around the 2s

12-09-2010, 10:32 PM	#12
Ghoru Senior Member Join Date: Jun 2009 Location: Rockhampton Car: '92 BG Astina Sp Posts: 999 View Photos By: Ghoru	jus sounds like your gears changed to me.... __________________ BG Astina - work in progress.... Scooters are like fat chicks, fun to ride until your mates find out... NOS is like a hot chick with AIDS, you know you wanna hit that,your just afraid of the consequences... http://www.eveonline.com/

12-09-2010, 10:34 PM	#13
lightwander Junior Member Join Date: Mar 2010 Location: vic melbourne Car: astina 1995 Posts: 14	so it normal and iam just over looking into things ?

12-09-2010, 10:36 PM	#14
70NYD Veni, vidi, vici Join Date: Mar 2008 Location: Brisbane Car: 1996 BA Hatch & 2005 RX8 Posts: 4,911 View Photos By: 70NYD	when you put the new engine in, did u overtighten the kickback cable?? still fishing here __________________

12-09-2010, 10:38 PM	#15
lightwander Junior Member Join Date: Mar 2010 Location: vic melbourne Car: astina 1995 Posts: 14	lol omfg i read that all wrong yeah it fine all good it just started tonight with the revs Last edited by lightwander; 12-09-2010 at 10:40 PM.

13-09-2010, 12:50 AM	#16
Noble323 E74A Join Date: Nov 2004 Location: Sydney Car: SP20 Posts: 1,248	Manual would be different as you can change to 5th gear i think or even 4th has different ratio to automatic But anyways i owned 3 hardtop astina v6 (Automatics not manual) and when at 100km it was all just under 3000rpm So i would say its normal champ - or 3 of my hardtops were stuff, which i dont think so . So my guess its all normal nothing to worry about if yours is a auto, cause wouldnt have a clue what it sits on manual Is yours a auto ?

13-09-2010, 01:08 AM	#17
lightwander Junior Member Join Date: Mar 2010 Location: vic melbourne Car: astina 1995 Posts: 14	yeah it's auto so everything normal ? u think from the pics

13-09-2010, 06:11 PM	#18
Ghoru Senior Member Join Date: Jun 2009 Location: Rockhampton Car: '92 BG Astina Sp Posts: 999 View Photos By: Ghoru	in my manual corolla it sits about 1800 in 5th @100kmh so i would imagine a 3 speed auto wouldnt differ too much __________________ BG Astina - work in progress.... Scooters are like fat chicks, fun to ride until your mates find out... NOS is like a hot chick with AIDS, you know you wanna hit that,your just afraid of the consequences... http://www.eveonline.com/

13-09-2010, 07:23 PM	#19
Noble323 E74A Join Date: Nov 2004 Location: Sydney Car: SP20 Posts: 1,248	lol, of course it would be different in 5th gear on manual would be a big difference in auto on 3rd gear, the 3speed would be rev'n harder looking at those pictures its looks fine for a 4speed auto v6 ba astina. like i said i had 3 auto v6's and all the same as yours, so i think its normal, if there was a auto and 5 speed on these ba's chances are it would sit between 2000-2500 @ 100kms i mean i could be wrong on the 5th gear auto thing, but regarding your question, its normal at those pictures

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode