To put the V6 (either KF or KL) in place of the 1.8L 4Cyl you need engine, ECU, wiring, transmission, radiator, brake booster, engine mounts, exhaust, maybe modified drive shafts and other little bits 'n' pieces.
To swap the KF 2.0 litre V6 with the KL 2.5 litre V6 all you need is the engine.
It's not that it isn't possable but too expensive. It would be cheaper if you had a 1.8 to trade to a V6 then do the swap.
Oh yeah,
You'd also need to change the front springs and tacho, the list just goes on and on
|