|
06-03-2007, 03:16 PM | #1 |
Driving a faster car now!
Join Date: Oct 2003
Location: Work, always at bloody work...
Car: Lotus ....... .
Posts: 5,217
|
FS: B3M Exedy Deal Struck!
B3Motorsports has recently taken exedy on board as a supplier. Prices will be up on the website shortly, but here are some ones relative to us to get the ball rolling...
BJ 1.6L & 1.8L and BG 1.8L SOHC Heavy Duty - $275 Button - $340 Cushion Button - $615 BJ 2L Heavy Duty - $355 Button - $445 BA V6 Cushion Button - $525 BA 1.8L, BH 1.6L and Mazda 2 (same as late model BA prices) Heavy Duty - $295 (225mm - early) or $255 (200mm - late) Button - (200mm only) - $435 Cushion Button - (200mm only) - $505 BG 1.8L DOHC Heavy Duty - $245 Button - $295 Cushion Button - $515 any other requests for prices let us know. |
Sponsored Links |
06-03-2007, 05:05 PM | #2 |
Junior Member
Join Date: Feb 2004
Posts: 13
|
How much for a GMK7495 shipped to 3150?
Last edited by driver101; 06-03-2007 at 05:08 PM. |
06-03-2007, 07:15 PM | #3 |
Junior Member
|
i have a badly slipping clutch, so timing is good, i might take you up... . i havea '97 [late ba] asty....just gotta get the car back from repairs after its drivers door was kissed by a ute...
whats your lead time on supply... and what do u charge for delivery. Last edited by goodfella; 06-03-2007 at 07:19 PM. |
06-03-2007, 10:04 PM | #4 |
Junior Member
|
hey i'm guesing these prices are for the clutch plate only? no pressure plate? can you get pressure plates aswell? prices?
__________________
lowered on king spring superlows (50mm), k&n air filter, 17" wheels, sports exhaust and induction. |
07-03-2007, 06:13 AM | #5 |
Manpink Crusader
Join Date: Jun 2004
Location: Stafford, Brisbane
Car: 1990 GD mx6 F2T, and soon I might drive the batmoobile once again
Posts: 2,280
|
Prices are for clutch plate and pressure plate
Come a a set from Exedy |
07-03-2007, 09:51 AM | #6 |
Driving a faster car now!
Join Date: Oct 2003
Location: Work, always at bloody work...
Car: Lotus ....... .
Posts: 5,217
|
driver - geting a price now.
goodfella - depends on the version you're after. just a HD or more? and i assume you're 1.8L too? timmy - full kit yo! |
07-03-2007, 10:03 AM | #7 |
Junior Member
|
Twilight,
yes I have a 1.8, it the last version of the BA model, so it has the F series, 200mm clutch. Does the kit also include Spiggot and thrust bearings?At this stage that is all, so can u work out a price for delivery to postcode 2046, Five Dock, Syd. Thanks Last edited by goodfella; 07-03-2007 at 10:16 AM. |
07-03-2007, 10:30 AM | #8 |
Senior Member
Join Date: Sep 2004
Location: Logan prefecture
Car: Touge monster
Posts: 7,585
|
HD kits include the thrust bearing, but not the spiggot bearing. Dunno about the higher spec kits.
Gav. |
07-03-2007, 11:28 AM | #9 |
Driving a faster car now!
Join Date: Oct 2003
Location: Work, always at bloody work...
Car: Lotus ....... .
Posts: 5,217
|
all kits should include everything (thrust bearng and spiggot)
goodfella - post will be $20 (registered of course). lead time - we'll be placing an order by the end of the week (we're trying to get them to make a cushion button clutch kit available for the BJ SP20 - they have never been made before, but i gave them good info on how to put a kit together using other bits). you'd think most if not all clutches would be in stock at any given point in time |
07-03-2007, 11:37 AM | #10 |
Senior Member
Join Date: Sep 2004
Location: Logan prefecture
Car: Touge monster
Posts: 7,585
|
|
07-03-2007, 11:37 AM | #11 |
The Hairy Mod
Join Date: Sep 2005
Location: southside ya'll and North Side, Brissy
Car: MINI Cooper S 2003
Posts: 8,110
|
__________________
For All your crash repair panels & lights, clear lights contact us at
PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735 |
07-03-2007, 11:43 AM | #12 |
GSL RallySport
Join Date: Mar 2004
Location: Brendale QLD!!!
Car: Cross 6
Posts: 1,835
|
They shouldn't include spigot...
__________________
- GSL RallySport - Ph: 1300 884 836 -
Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear? - QFM Performance Brake Pads - Also specialising in - DMS High Performance Shock Absorbers - Monit Rally Computers - |
07-03-2007, 12:00 PM | #13 |
Senior Member
Join Date: Sep 2004
Location: Logan prefecture
Car: Touge monster
Posts: 7,585
|
|
07-03-2007, 12:09 PM | #14 |
Driving a faster car now!
Join Date: Oct 2003
Location: Work, always at bloody work...
Car: Lotus ....... .
Posts: 5,217
|
just confirmed - no spiggot in the kit
|
07-03-2007, 12:21 PM | #15 |
Junior Member
|
No probs, I'm in ... If you can supply the spiggot bearing anyway, that would be gr8, just let me know what i owe you ..
i'll pm u my details. |
07-03-2007, 02:31 PM | #16 |
Crazy Member
|
Just checking it out (and yes I know I don't need one) but the Exedy online catalog doesn't list a button clutch for the BJ 2.0L. Whats the go there?
http://www.exedy.com.au/catalogue-de...sp?id=38999298
__________________
King Spring Lows, TWM short shifter, split eardrums, blah blah blah and a little voice saying "I wish I had a turbo" Updated 2007-03-19: Readers Rides Finally upgraded from the stock headunit |
07-03-2007, 02:35 PM | #17 |
Driving a faster car now!
Join Date: Oct 2003
Location: Work, always at bloody work...
Car: Lotus ....... .
Posts: 5,217
|
yeah it doesnt list one, but it is available.
the cushion is definately not available, but we're working on that (should be a B3M only deal - ie they wont sell it as a kit) |
07-03-2007, 03:25 PM | #18 |
Senior Member
Join Date: Sep 2004
Location: Logan prefecture
Car: Touge monster
Posts: 7,585
|
Meaning Exedy just take a 225mm clutch plate from another kit with the same tolerances. ie: Probably the same as most other G series gearboxes that don't use the 215 or 235mm...
|
07-03-2007, 06:47 PM | #19 |
Junior Member
|
so andy do you know the clamping force on the hd clutch? can you get a clutch kit to suit the familia flywheel? $$$?
__________________
lowered on king spring superlows (50mm), k&n air filter, 17" wheels, sports exhaust and induction. |
08-03-2007, 12:31 AM | #20 |
Junior Member
Join Date: Feb 2004
Posts: 13
|
|
|
|