[JDM] Mazdaspeed MS-01 / MS-01R / MS-01F / MS-01C / MS-01S rims

Rupewrecht · 14-02-2007, 01:48 PM

Ok, in this thread you'll find all the MS-01 rims for sale at any time on the auctions.

Chi'sLantis · 27-04-2007, 11:22 AM

too bad i really like the ones from the first pic only there in 5 stud which is a shame.

Ronin (Adam) · 02-05-2007, 09:17 AM

they're gorgeous wheels...

mcwilly · 02-05-2007, 12:47 PM

pitty the gold ones are 5 stud look sick

DavoAust · 14-06-2007, 07:09 PM

wow, love the first set of 4

is it possible to get 4 stud ones through mazda speed in aust? or is it just jpn?

Rupewrecht · 14-06-2007, 07:58 PM

Nah, Mazda Aus don't generally deal with Mazdaspeed stuff as they wont cover it with a warranty.

There's a few sets of 4 stud ones above.

Plutonus · 20-06-2007, 10:08 PM

I want gold ones. Pimpin.

Rupewrecht · 10-07-2007, 04:18 PM

New i can get these (plus fees/shipping):

MS-01 Magnesium

in 18x8, +40, 5x114.3. 114750yen per rim

MS-01S

17x7.5, +40, 5x114.3 - 63000yen per rim.
18x8, +40, 5x114.3 - 69300yen per rim.
19x8, +40, 5x114.3 77700yen per rim.

DavoAust · 04-12-2007, 03:31 PM

those MS-01S are still the hottest rims around here... too bad they cost so much and are 5 stud

Abaddon · 01-07-2008, 10:18 AM

Are the Mazdaspeed Wheels always five stud?

Rupewrecht · 01-07-2008, 10:35 AM

Quote:

Originally Posted by Abaddon

Are the Mazdaspeed Wheels always five stud?

From what i've seen:

MS-01Rs are 4 stud, but only come in 14-15 inch
MS-01Fs are 5 stud, and are 16-17 inch
MS-01Cs are 5 stud, and are 17-18 inch
MS-01Ss can be either, but the 4 stud ones are usually 15-16 inch, while the 5 stud are 16-18 inch

The MS-03s come in 4 stud as well though, and the MS-Tourings are 4 and 5 stud. MS-02s are 5 stud only.

93_Festiva · 01-07-2008, 08:29 PM

Has there been much come up in the 4x114.3 +40 or is it mainly 4x100 +40

Craig....

Rupewrecht · 01-07-2008, 08:35 PM

Quote:

Originally Posted by 93_Festiva

Has there been much come up in the 4x114.3 +40 or is it mainly 4x100 +40

Craig....

Exclusively 4x100. I can't say i've ever seen a set of 4x114.3s at all.

But the 4x100 are either +35 or +38 depending on width, not +40.

mcwilly · 14-07-2008, 03:36 PM

any gun metal 18s with 4 stud in mint condition

Rupewrecht · 14-07-2008, 03:38 PM

Quote:

Originally Posted by mcwilly

any gun metal 18s with 4 stud in mint condition

They don't exist.

02-KQ-LASR · 21-07-2008, 10:01 PM

these rims are light as right?

Rupewrecht · 21-07-2008, 10:10 PM

Quote:

Originally Posted by 02-KQ-LASR

these rims are light as right?

Yeah, rims made by RAYS are generally pretty light for their size/construction.

mcwilly · 14-08-2008, 04:10 PM

with the 15x7 with 35 offset i wont have any problems with them fitting?

Rupewrecht · 14-08-2008, 04:26 PM

Quote:

Originally Posted by mcwilly

with the 15x7 with 35 offset i wont have any problems with them fitting?

I wouldn't think so, but i'm not 100% with BG fitment.
It depends how low your car is - i'd think that the back arches would be a problem area if there is going to be an issue.

According to the tyre calc, they'd be 9 mm closer to the struts, and 29 mm closer to the guard (compared to 14x5.5 +45 stockies).

Time to get out the tape measure, but don't forget that most tyres taper at the sides as they get closer to the tread so that will give you a little more clearance.

Mc_Nuggets · 09-09-2008, 06:13 AM

is the any ms-01s/18inc or 17inc Gunmetal ones, and quote for QLD shipped too please. pm me

14-02-2007, 01:48 PM	#1
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	[JDM] Mazdaspeed MS-01 / MS-01R / MS-01F / MS-01C / MS-01S rims Ok, in this thread you'll find all the MS-01 rims for sale at any time on the auctions. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1 Last edited by Rupewrecht; 24-07-2008 at 01:51 PM. Reason: added chart

02-05-2007, 12:47 PM	#4
mcwilly Senior Member Join Date: Jul 2004 Location: newcastle NSW Car: 323 astina Posts: 780 View Photos By: mcwilly	pitty the gold ones are 5 stud look sick __________________ 340KW @ 24psi....................pb 13.3 @ 118mph (3rd gear issues + wheel spin)

14-06-2007, 07:09 PM	#5
DavoAust Senior Member Join Date: Mar 2007 Location: Brisbane Car: Red '93 3000GT / Black '08 Ninja 250R Posts: 2,930 View Photos By: DavoAust	wow, love the first set of 4 is it possible to get 4 stud ones through mazda speed in aust? or is it just jpn? __________________ Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT

14-06-2007, 07:58 PM	#6
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Nah, Mazda Aus don't generally deal with Mazdaspeed stuff as they wont cover it with a warranty. There's a few sets of 4 stud ones above. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

20-06-2007, 10:08 PM	#7
Plutonus Senior Member Join Date: Jun 2006 Location: Sydney, NSW Car: Traitor vehicle Posts: 778 View Photos By: Plutonus	I want gold ones. Pimpin. __________________

27-04-2007, 11:22 AM	#2
Chi'sLantis Junior Member Join Date: Mar 2006 Location: UK Car: mazda 323F BA Posts: 25	too bad i really like the ones from the first pic only there in 5 stud which is a shame.

02-05-2007, 09:17 AM	#3
Ronin (Adam) Junior Member Join Date: Jul 2005 Location: UK Car: Mazda 323F BA Posts: 26	they're gorgeous wheels...

10-07-2007, 04:18 PM	#8
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	New i can get these (plus fees/shipping): MS-01 Magnesium in 18x8, +40, 5x114.3. 114750yen per rim MS-01S 17x7.5, +40, 5x114.3 - 63000yen per rim. 18x8, +40, 5x114.3 - 69300yen per rim. 19x8, +40, 5x114.3 77700yen per rim. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

04-12-2007, 03:31 PM	#9
DavoAust Senior Member Join Date: Mar 2007 Location: Brisbane Car: Red '93 3000GT / Black '08 Ninja 250R Posts: 2,930 View Photos By: DavoAust	those MS-01S are still the hottest rims around here... too bad they cost so much and are 5 stud __________________ Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you. '97 1.8L Hardtop '93 3.0L TT 3000GT

01-07-2008, 10:18 AM	#10
Abaddon Junior Member Join Date: Jul 2007 Location: Newcastle, NSW Car: White 1996 Astina Hatch 1.8L Man Posts: 168	Are the Mazdaspeed Wheels always five stud? __________________ In the land of the blind, the one eyed man is king.

01-07-2008, 08:29 PM	#12
93_Festiva Junior Member Join Date: Mar 2008 Location: Cedar Vale, Queensland Car: Festiva Posts: 6	Has there been much come up in the 4x114.3 +40 or is it mainly 4x100 +40 Craig....

14-07-2008, 03:36 PM	#14
mcwilly Senior Member Join Date: Jul 2004 Location: newcastle NSW Car: 323 astina Posts: 780 View Photos By: mcwilly	any gun metal 18s with 4 stud in mint condition __________________ 340KW @ 24psi....................pb 13.3 @ 118mph (3rd gear issues + wheel spin)

21-07-2008, 10:01 PM	#16
02-KQ-LASR SHO~247 Join Date: Sep 2006 Location: SA Car: laser kq 2002 Posts: 2,024 View Photos By: 02-KQ-LASR	these rims are light as right? __________________ lots of bj/kn/kq laser parts for sale!! custom boot install(fibreglass boxes),mazda 3 handbrake rachet,power window motors x 2,power window switches, guage rings its all gotta go!!! pm me any offers!!

14-08-2008, 04:10 PM	#18
mcwilly Senior Member Join Date: Jul 2004 Location: newcastle NSW Car: 323 astina Posts: 780 View Photos By: mcwilly	with the 15x7 with 35 offset i wont have any problems with them fitting? __________________ 340KW @ 24psi....................pb 13.3 @ 118mph (3rd gear issues + wheel spin)

09-09-2008, 06:13 AM	#20
Mc_Nuggets Astina GT Junkie Join Date: Jan 2008 Location: \| Brisbane \| Car: SP20 Hatch 2001 Mica Black Posts: 370 View Photos By: Mc_Nuggets	is the any ms-01s/18inc or 17inc Gunmetal ones, and quote for QLD shipped too please. pm me Last edited by Mc_Nuggets; 09-09-2008 at 06:21 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode