[JDM] Mazdaspeed MS-01 / MS-01R / MS-01F / MS-01C / MS-01S rims - Page 2

Rupewrecht · 09-09-2008, 08:34 AM

Quote:

Originally Posted by Mc_Nuggets

is the any ms-01s/18inc or 17inc Gunmetal ones, and quote for QLD shipped too please. pm me

Not in gunmetal, and not in a width that'd fit your car. MS-01S are pretty rare in a 17x8 or 18x8. You could make a set of MS-01 from some of the pairs listed though, but the offset would be on the high side.

mussing · 11-09-2008, 03:53 PM

Man I really want a set of these, but I can't justify it when I haven't got my sound system sorted yet...

I think the applicable term is 'commodity fetish'...

Rupewrecht · 11-09-2008, 04:11 PM

Well M J just picked up a silver set of MS-01Rs from me on the weekend, so you'll see how they look on a BG Astina soon.

M J · 11-09-2008, 07:34 PM

As Rupe just said, i got a set of the MS01-R rims, hopefully will have a few shots after a trial fit on saturday, car is getting a well deserved service tomorrow, stay tuned for some pics soon

M J · 13-09-2008, 04:19 PM

As promised just a couple of pics, apologies for the crappy camera phone

I would also like to say a big thanks to Dan, I can't recommend him enough and i'm very happy with the new rims

project.r.racing · 14-09-2008, 07:12 AM

Looking good M J. Very wide in the arches huh?

infini · 14-10-2008, 03:43 PM

I'm in love with the gunmetal ones!!
actualy no... i'm in love with all the ms-01s'!!
one day i'll get a set...

Ice88 · 26-03-2009, 11:37 PM

How much does a set of MS-01S's go for Rupe? Are wheels like most stuff multiple by 2 to get rough estimate landed?

I know i ask alot of questions but i am curious, sorry

Rupewrecht · 27-03-2009, 08:28 AM

Quote:

Originally Posted by Ice88

How much does a set of MS-01S's go for Rupe? Are wheels like most stuff multiple by 2 to get rough estimate landed?

I know i ask alot of questions but i am curious, sorry

Anywhere between about 50-20000 depending on color and size. 70% of sets are staggered sets though for RX7 (8/9") but there are RX8 sets in 18x8 +40 that would be closest to fitting an SP20 that pop up from time to time. Also some in 16x* sometimes too, but they're usually 4 stud.

Landed cost - 50000yen sell = $1400 landed, 100000 = $2460 landed. That's just a rough cost, as it depends where they're located in Japan etc.

And always happy to answer questions!

jesiotrot · 23-06-2009, 09:56 PM

Quote:

Originally Posted by rodhog

Going for the gold look Jess ?

ha good stuff if you go with it. let me know how it clears.

Not sure what it would look like against the grey. But i like the width and offset. My XR6 wheels were 17x8 +36 and they fit ok but would rub on the outer guard sometimes. I think the +35 would make it perfect.

The ones i have currently are 17x7 +29. Which means they sit about 1-2mm out furthter than the 17x8 +35's. They look good but i'd really like 8" wide!

marcusus · 10-04-2010, 08:00 PM

Hey Rupe, do the stickers for MS-01Rs come up at all on their own?

Rupewrecht · 10-04-2010, 08:30 PM

Quote:

Originally Posted by marcusus

Hey Rupe, do the stickers for MS-01Rs come up at all on their own?

Nah, i've never seen them. Getting them for MS-01S rims might be possible, but not anything else as MS don't stock/make much in the way of pre-2002 stuff (which was the last time the MS-01Rs were listed as for sale).

marcusus · 11-04-2010, 02:38 AM

Interesting. Reckon you can chuck up any finds you get for any rim stickers in this thread?

Cosmo Dude · 11-04-2010, 06:24 AM

I'll second that. I've got two of 'em being re-finished ATM.

Rupewrecht · 11-04-2010, 10:01 AM

Yeah, will do. I'll try my contacts in Japan - i should be able to get the 'Mazdaspeed ones on the currents MS-01S, but i doubt that i could get the "MS-01R' or the 'Roadster' ones. Worth a try though.

marcusus · 11-04-2010, 11:59 PM

It's actually the MS-01R stickers that'll be the problem. The 'Mazdaspeed' an 'Roadster' stickers are fairly generic images which should be able to be pulled off the net and changed to sticker format. The MS-01R is what concerns me most. I reckon the 'R' is the same as the 'R' in 'Roadster', and the 'MS-01' bit looks like a generic font with italics. So you could probably get around it, but it'd be much nicer to have a factory set.

Rupewrecht · 12-04-2010, 08:50 AM

I'll see what i can do. If not, i can reproduce them easily enough - at least while i still have a set of the MS-01Rs in stock!

marcusus · 12-04-2010, 11:15 PM

Quote:

Originally Posted by Rupewrecht

I'll see what i can do. If not, i can reproduce them easily enough - at least while i still have a set of the MS-01Rs in stock!

Cool! That'd be awesome if I could get a hold of a new set of stickers! Keep us updated

Marlon · 13-04-2010, 02:05 AM

Quote:

Originally Posted by marcusus

Cool! That'd be awesome if I could get a hold of a new set of stickers! Keep us updated

+1 I'm interested

MX6T2NV · 15-04-2010, 10:08 PM

Hey Rupe! I got my MS-01F's last night

Nice packing!
anyway to contribue to the thread, are you able to get stickers for:
MS-01C - which says "MazdaSpeed Competition"
MS-01F - which says "Forged Monoblock"(including the small writing underneath it)
And any idea how much they would be?

11-09-2008, 04:11 PM	#23
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Well M J just picked up a silver set of MS-01Rs from me on the weekend, so you'll see how they look on a BG Astina soon. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

11-04-2010, 06:24 AM	#34
Cosmo Dude コスモ Join Date: Dec 2002 Location: Location: Vic Car: Mazda '95 Astina I4, '86 B2K and '10 3 MZR-CD Posts: 7,888 View Photos By: Cosmo Dude	I'll second that. I've got two of 'em being re-finished ATM. __________________ My 'stina Hatch

11-04-2010, 10:01 AM	#35
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Yeah, will do. I'll try my contacts in Japan - i should be able to get the 'Mazdaspeed ones on the currents MS-01S, but i doubt that i could get the "MS-01R' or the 'Roadster' ones. Worth a try though. __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

12-04-2010, 08:50 AM	#37
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	I'll see what i can do. If not, i can reproduce them easily enough - at least while i still have a set of the MS-01Rs in stock! __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-09-2008, 03:53 PM	#22
mussing Senior Member Join Date: Jul 2007 Location: Sydney Car: 1990 323 Astina BG SP Posts: 1,071 View Photos By: mussing	Man I really want a set of these, but I can't justify it when I haven't got my sound system sorted yet... I think the applicable term is 'commodity fetish'...

11-09-2008, 07:34 PM	#24
M J Junior Member Join Date: Aug 2005 Location: k Car: k Posts: 28	As Rupe just said, i got a set of the MS01-R rims, hopefully will have a few shots after a trial fit on saturday, car is getting a well deserved service tomorrow, stay tuned for some pics soon

13-09-2008, 04:19 PM	#25
M J Junior Member Join Date: Aug 2005 Location: k Car: k Posts: 28	As promised just a couple of pics, apologies for the crappy camera phone I would also like to say a big thanks to Dan, I can't recommend him enough and i'm very happy with the new rims

14-09-2008, 07:12 AM	#26
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	Looking good M J. Very wide in the arches huh?

14-10-2008, 03:43 PM	#27
infini Junior Member Join Date: Aug 2008 Location: Melbourne, Australia Car: Mazda Capella Infini Posts: 2	I'm in love with the gunmetal ones!! actualy no... i'm in love with all the ms-01s'!! one day i'll get a set...

26-03-2009, 11:37 PM	#28
Ice88 Senior Member Join Date: Jun 2008 Location: Auchenflower, Brisbane Car: Blue SP20 Posts: 2,782	How much does a set of MS-01S's go for Rupe? Are wheels like most stuff multiple by 2 to get rough estimate landed? I know i ask alot of questions but i am curious, sorry

10-04-2010, 08:00 PM	#31
marcusus Junior Member Join Date: Aug 2008 Location: Sydney Car: Mazda MX5 Posts: 5	Hey Rupe, do the stickers for MS-01Rs come up at all on their own?

11-04-2010, 02:38 AM	#33
marcusus Junior Member Join Date: Aug 2008 Location: Sydney Car: Mazda MX5 Posts: 5	Interesting. Reckon you can chuck up any finds you get for any rim stickers in this thread?

11-04-2010, 11:59 PM	#36
marcusus Junior Member Join Date: Aug 2008 Location: Sydney Car: Mazda MX5 Posts: 5	It's actually the MS-01R stickers that'll be the problem. The 'Mazdaspeed' an 'Roadster' stickers are fairly generic images which should be able to be pulled off the net and changed to sticker format. The MS-01R is what concerns me most. I reckon the 'R' is the same as the 'R' in 'Roadster', and the 'MS-01' bit looks like a generic font with italics. So you could probably get around it, but it'd be much nicer to have a factory set.

15-04-2010, 10:08 PM	#40
MX6T2NV Junior Member Join Date: Mar 2010 Location: Northbridge Car: MX-6 Turbo Posts: 2	Hey Rupe! I got my MS-01F's last night Nice packing! anyway to contribue to the thread, are you able to get stickers for: MS-01C - which says "MazdaSpeed Competition" MS-01F - which says "Forged Monoblock"(including the small writing underneath it) And any idea how much they would be?