Go Back   AstinaGT Forums > Performance & Technical > Suspension & Wheels

Reply
 
Thread Tools Display Modes
Old 13-06-2009, 12:35 AM   #1
asanga
Senior Member
 
asanga's Avatar
 
Join Date: Dec 2006
Location: Sutherland Sydney
Car: astina BA 1997 1.8Ltr
Posts: 609
HOW TO : Replace lower arm ball joints of BA Astina (lots of pics!!)

I replaced the ball joints recently due to torn rubber boot and thought I'll post the method I used. Its very straight forward and doesn't need much tools. I'm pretty sure most ppl here have done this but for those who haven't this might be a guide and you'll save $$$ if you do it your self!!.

1. Jack the car up (which ever the side you are going to replace) and secure using jack stands. Never trust a hydraulic jack it can fail without a warning and it has happened to me once!



2. remove the wheel

3. Remove the nut on the top side of the arm as shown in pic (17mm socket), expect this to be very tight!



4. Remove the nut on the bottom side as shown in pic (17mm socket), again this will be very tight.



5. remove the nut and pull the bolt out completely to release the pin of the ball joint. Tap it lightly or pry open using a screwdriver if it doesn't fall off easily.



After removing the ball joint


The new part


Comparison (there was sand, water, dirt etc mixed with grease inside the damaged boot and it was making a noise when cornering/breaking)



6. Place the new ball joint (installation is reverse order of removal).

You may need to use the jack to lift the lower arm up to assist with alignment.(if you don't have an assistant to help)



All done!!


Repeat this process for other side as well!

Good luck!
asanga is offline   Reply With Quote
Sponsored Links
Old 02-01-2010, 01:15 AM   #2
mig360m
Junior Member
 
mig360m's Avatar
 
Join Date: Dec 2006
Location: Trinidad
Car: 323
Posts: 48
good info asanga
mig360m is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 06:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
2001- 2010 AstinaGT