FS: [QLD] BG-8Z Familia GTX spare parts!

[zagor]

Howdy boys and girls.
My name is Baz. Im a newbie here as of tonite. Im a member of FordLaser.com and Mazdafours.com. Know a few people.

I basically wanted to post this up for both u guys and myslef coz i didn’t have much response/luck with posting it up on my other forums. Just wanted to expand my chances. Hopefully u guys will snap it all up and help me get rid of it. Things have changed.

Dad was on my back to get rid of my halfcut and free up valuable shed space. So I did. I finally got of my ass and stripped my BG-8Z GTX halfcut for parts and sold the shell for cash at Sims Metal. After I had finished, I listed all the parts and was able to get 3 full A4 pages!

Neways guys, have a read through, show ur interest and grab something off me. Please don’t be shy just coz my parts are off a GTX.

PM me on here or on the other forums ( i go by the same username) or give me a call on 0408726410 whenever.
Soz about the size of all this.
Cheers
BAZ

Here goes – BG8Z Mazda Familia GTX – Parts stripped:
· Numerous dash brackets,
· Battery support bracket,
· Brackets for P/S and A/C hoses underbonnet,
· Front mudguards,
· Rubber strip in engine bay – runs above compliance plates on that board thingy,
· Bonnet support rod,
· Complete Hydraulic Clutch operating system – *Clutch master cylinder, *Fluid feed line hose from brake master cylinder to clutch master cylinder, *Lines from clutch master cylinder to slave cylinder, *Slave cylinder
· Cross member,
· Rear G/box mount,
· BPT A/C pump, complete with all A/C lines,
· BPT A/C pump mounting bracket onto engine block,
· A/C radiator/core – in fair condition, complete with condenser holder bracket, other brackets, and support rubbers,
· A/C blower motor – in dash,
· A/C in-car core, next o blower motor,
· Power Steering pump,
· P/S fluid cooler,
· P/S pump bracket onto engine block,
· P/S fluid supply and return hoses,
· Complete P/S steering rack, with all line/hoses, boots and tie rod ends all in GC,
· COMPLETE – Steering, Braking, & Suspension components, (front of vehicle only) *Driveshafts, *Hubs, *Struts, *Sway bar, *Suspension arms, *Cradle, *Lower ball joints, *Cradle brace, *Calipers SOLD,
· Bonnet release cable,
· Actual Bonnet release mechanism on radiator support panel,
· Bonnet hinges,
· LH Headlight, Jap Spec (plastic) Slightly yellow, otherwise in GC,
· LHF Indicator,
· LHF headlight/indicator under garnish,
· Both steering rack arm tunnel garnishes,
· LHS 4WD G/box mount,
· Front 4WD G/box mount,
· 4WD gear cables,
· RH & LHF tow hook brackets,
· Grey and Black KE etc SOHC Carby Engine mount cup,
· B6T driver side Engine mount cup (modified),
· BPT Alternator adjusting bracket,
· BPT drivers side Engine mount – 1 of 3 – engine block piece,
· BPT drivers side Engine mount – 2 of 3 – middle piece (rubber mount),
· Ignition barrel/lock, complete with 2 spare keys,
· Factory Strut brace,
· Speedo cluster, 134,000 odd kms on clock,
· Brake proportioning valve, complete with both lines from master cylinder,
· Both LHF & RHF brake lines and hoses, from proportioning valve to calipers,
· Window washer fluid bottle,
· Window wiper linkages, (not arms),
· Horn,
· Fuel and boot release mechanism,
· Radiator, in fair condition – complete with drain plug, support rubbers, top sensor and original cap,
· Top and bottom radiator hoses,
· Radiator overflow bottle,
· Radiator support brackets, both top and bottom,
· BG8Z GTX front bar, very damaged! FREE,
· Accelerator pedal,
· Pedal box,
· Pedal box switches - brake and clutch,
· In car Fuse box,
· Air ducting under dash,
· Steering column,
· Various relays – *Relay timer and door lock switch, *Flasher unit switch, *Collapsible mirrors switch,
· Familia Front Grille between headlights,
· Garnish between top of bonnet and lower windscreen,(covers wiper linkage box)
· Various under-bonnet relays,
· ABS equipped brake booster,
· Front ABS wheel speed sensors,
· Under body engine gaurds/covers,
· Both upper wheel arch garnishes,
· Both CV shaft plastic garnishes in wheel arch,
· Various metal brackets,
· Gove box,
· Numerous dash plastics,
· Combo switch surround,
· LH foot rest,
· Fuse box garnish, near RH foot,
· Cluster surround, complete with A/C and ECO on off switch, Rear demister switch, Clock, Electric mirror switch,
· KE Accelerator cable,
· KE A/C pump,
· KE A/C condenser,
· KE ignition coil,

[chipa]

Will that strut brace fit a standard BG? Or would it be too different?

[mazdamanik]

the strut brace from a GTX will only fit the sedan BG as teh fastback (hatch) has a different bolt pattern on the front struts

[chipa]

Bugger, oh well.. Thanks for that.

[Lunchbox#bg]

how much for the Strut brace

[Lunchbox#bg]

Originally Posted by chipa

Bugger, oh well.. Thanks for that.

Whitline make them for the astina SP think theyre around $150 *think May be wrong on the price

[zagor]

Hey Lunchbox#BG,

Cheers for the reply.

Yeh ill let it go, how does $60 sound?
U might wana PM me or soemthing k?
Where is Aulbry at?

Thanx,
BAZ

[zagor]

Bump!

[zagor]

Bump!
Plz reply yo. lol
BAZ

[zagor]

Bump