|
![]() |
#21 | |
Junior Member
Join Date: Nov 2008
Location: Melbourne
Car: R32 GTR, 260Z, BMW K100
Posts: 107
|
Quote:
190psi (??) actually seems a little high to me, but I'm not that familiar with these engines |
|
![]() |
![]() |
![]() |
#22 | |
2-Wheeled Weirdo
![]() |
Quote:
clean up your engine, run it for a while, and look for any major oil leaks. even if you fixxed the valve seals, if you are losing that much oil it has to be going somewhere else as well. I love magnetec, my car runs great on it, and it comes out clean! so suprising to be honest for mineral oil. I also run 10w30 on my BP with 160 000km (92 mod) because the 20w50 makes it run rough and bog down ![]() |
|
![]() |
![]() |
![]() |
#23 |
Junior Member
Join Date: Mar 2009
Location: Sydney
Car: Mazda Astina Hatch BA 1997
Posts: 67
|
Actually I think I said something wrong. The car is loosing around a liter of Magnatex 10-40 for every 1000 km not worse. I do not think the engine is loosing anymore oil anywhere else.
|
![]() |
![]() |
![]() |
#24 |
obsessed-incomplete-broke
![]() Join Date: Oct 2008
Location: Brisbane
Car: BA Hardtop/Hatch
Posts: 5,441
|
mine uses approx 1ltr per tank of fuel haha. leaking a little around, no smoke on startup but heaps when reved at all
![]() ![]() also- what makes a good used engine -how to tell signs of abuse etc :s thanks! |
![]() |
![]() |
![]() |
#25 |
2-Wheeled Weirdo
![]() |
used engines are pot luck... GOOD wreckers / importers will strip and clean the engine and make sure its ok, and provide a warranty (usually only like 3000km or 6 months or so...)
or save up and get a reconny ![]() Whats the availability on exhange motors in the BP range? anyone know? |
![]() |
![]() |
![]() |
#26 |
Senior Member
![]() Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,929
|
low km bp engines are hard to find. since the youngest from a oz delivered car would be 11 years old now. and the eldest begin 19 years old.
but most BP engines with 120,XXXkm to 150,XXXkm cost between $750-$950. and then it'll be $150-$250 to transport to your location, depending on where the wrecker/seller is located. i recently purchased a BP with 12X,XXXkm on it for $150. and it cost me $50 for transport in the back of a mechanics ute as it was located 45mins drive away. I was very lucky, but I did wait 3 years to actually find it. and it really needed to be replace 18 months ago. |
![]() |
![]() |
![]() |
#27 |
Junior Member
Join Date: Mar 2009
Location: Sydney
Car: Mazda Astina Hatch BA 1997
Posts: 67
|
Has anyone had their valve stem seals professionally changed by mechanic ? how much was it ? and I long does it take roughly.
|
![]() |
![]() |
![]() |
#28 |
Senior Member
![]() Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,929
|
it be part of a head rebuild, so $1200-$1500
|
![]() |
![]() |
![]() |
#29 |
2-Wheeled Weirdo
![]() |
|
![]() |
![]() |
![]() |
#30 |
Senior Member
Join Date: Dec 2006
Location: Sutherland Sydney
Car: astina BA 1997 1.8Ltr
Posts: 609
|
|
![]() |
![]() |
![]() |
#31 |
2-Wheeled Weirdo
![]() |
|
![]() |
![]() |
![]() |
#32 |
Senior Member
![]() Join Date: Sep 2004
Location: n/a
Car: n/a
Posts: 10,929
|
|
![]() |
![]() |
![]() |
#33 |
Senior Member
Join Date: Aug 2009
Location: QLD
Car: ......
Posts: 952
|
that is cause alot of mechanics CBF and want to charge to do a bigger job
|
![]() |
![]() |
![]() |
#34 |
Veni, vidi, vici
![]() Join Date: Mar 2008
Location: Brisbane
Car: 1996 BA Hatch & 2005 RX8
Posts: 4,911
|
yeah its tricky from what i heard, but not impossible.
im just looking for a reason to strip my rims of to paint the calipers and rotors (satin black, nothing flashy haha) but i am SOO lazy |
![]() |
![]() |
![]() |
|
|