|
12-06-2012, 11:51 AM | #1 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
1993 BG Astina SP Turbo
Thought i might as well start a thread for my project, pictures will come when i sort them out, but for now just the info.
First car was a burgandy BG Astina SOHC with minor mods including king low springs, 17" momo wheels, custom honda accord body kit, two tone carbon fibre vinyl, glass sunroof, tinted tail lights, custom silver interior paint, 7" jensen audio flip out touch screen, 6" eclipse fronts, 6x9" pioneer rears and a pioneer 10" sub, custom CAI under head light, 2" cat back exhaust. Anyway i sold this car shortly after getting my open license and decided it was time for an upgrade so i decided to get a 1993 BG Astina SP with the 1.8 DOHC BP05 motor as i knew they were a powerplant to work with. When i bought the car it was half the market price, even though it had rough paint, caved in front nose cone, messed up roof lining, ripped driver seat, original wheels, screwed clutch and just general wear and tear. It was however untouched as it still had the tape player, original speakers etc. so this is where i started doing it up to get it looking as good as my first BG. 1. Fixing up the 190,000km engine with $1200 worth of repairs with new - engine mounts - clutch - timing belt - hoses - clutch slave cylinder - ignition leads - spark plugs - tyres - K&N panel filter - valve cover gasket - coolant - oil - etc. 2. Replacing the front nose cone - the nose panel was absolutely destroyed so i sourced a new one from a red astina and replced it, while at the same time doing the same under headlight CAI. - i then wrapped this panel in 3M carbon fibre vinyl so it didnt stand out like dogs balls compared to the bright red 3. Wheels - i put my 17" momo wheels from my first astina onto the car, which made it look 100000000x better 4. Bar Lights - while searching for new seats i stumbled across almost brand new front bar lights and replaced them (which people always want to steal when they see that they're not faded) 4.1 Lip - custom sportivo lip was found fairly cheap from a 180SX in parkinson, so i snapped it up knowing i could make it fit. At the moment its only test fitted before i mould it into the body, but it can stay like that for now 5. Steering Wheel and Knob - i replaced the steering wheel with a new leather saas one, which is grey and black which matches the car perfectly and to go along with this i replaced the gear boot and knob with matching colours and style. 6. Paint - the paint on the rear panels, roof and bonnet were atrocious so i decided to go something different and go the two tone paint with the factory silver on bottom and the deep black with silver flake on top (which needs to be redone due to the clear going off) 7. Roof Liner - I decided to hell with this stupid ripping roof liner i want to replace it, so instead of going factory i decided to do a custom black suede roof liner (which was hard because of the sunroof) and delete the roof handles from above each door. 8. Current Stage (BPT) - the car is jacked up and the engine pretty bare, already have sourced all the BPT parts since january 2012. The intake manifold is on, exhaust manifold with turbo and dump ready to go on. FMIC ready to go on with the custom black piping and black intercooler then its all the fiddly hoses and stuff to sort out, except for the fabrication work which needs to be done for part of the IC piping and the exhaust. BP turbo is up and running 24/06/2012 at approximately 1pm at 8 psi already need a hd clutch...got a new oem clutch 10,000km ago hahaha that's how much more power it has that it is slipping in 3,4,5 already after 2 test runs :P Last edited by rogerstrampoline; 25-06-2012 at 02:31 PM. |
Sponsored Links |
12-06-2012, 12:20 PM | #2 |
Senior Member
|
Wooo, about time you started a project thread! I didn't realise your motor was so 'fresh' either, definitely sounds like a good motor to strap the turbo gear to. Suede roof liner is pimp too.
__________________
|
12-06-2012, 01:07 PM | #3 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
Yeah I searched for cars with straighter bodies but most had 260,000+ km so i decided go for the not so good looking but fresher motor
|
22-06-2012, 07:57 PM | #4 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
Intercooler piping done...and custom. Intake pipe done from pirtek with flexible 1 3/4" heat resistant metal and fabric woven pipe tied to the AFM. Bov is all hooked up. Exhaust is getting done tomorrow along with the tapped line for the wastegate and then t into that for the boost gauge
Stock with fmic instead of smic should see about 11-12psi standard instead of 8....also found out I have to cut the bumper slighlty to fit it on with the pipes |
22-06-2012, 09:42 PM | #5 |
HONEYWELL REPRESENT
Join Date: Aug 2005
Location: Salisbury - Inner City
Car: 1997 BA Hardtop - Had a 2003 BJii J48 Sport20, and 2x bg SOHC astina hatches
Posts: 5,011
|
Pictures???
__________________
|
22-06-2012, 10:47 PM | #6 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
You'll just have to wait to see it in person :P then ill put pics up
|
24-06-2012, 04:09 PM | #7 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
BP turbo is up and running just had a few issues like **** spark plugs so replaced those again and then after my 2nd test run down the street the oem BP clutch I had installed 10,000km ago is now slipping in high 3,4,5 gears hahaha goes to show the power difference. Now awaiting a mod plate sometime and insurance is getting done tomorrow
|
24-06-2012, 04:14 PM | #8 |
Senior Member
|
Super sweeeet!!! Awesome to hear it's up and running with no major troubles. Also, clutch slip just lets you know the motor is running properly. Any idea on time for a mod plate? I want a ride soon!
__________________
|
26-06-2012, 12:11 PM | #9 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
Mod plate done just waiting for insurance to be okay'd.....anyone need a mod plate let me know I got it for $80
|
01-07-2012, 10:56 PM | #10 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
Gearbox is coming out this weekend thanks to jared, its receiving a new hd clutch, pressure plate, throwout bearing, spigot bearing and a machined flywheel which means that it will finally get a good boosting and be a warm up for the dyno day
|
02-07-2012, 08:23 AM | #11 |
Senior Member
|
Yay! I'm definitely going to try and get my hybrid turbo on for the dyno day.
__________________
|
02-07-2012, 08:34 AM | #12 |
HONEYWELL REPRESENT
Join Date: Aug 2005
Location: Salisbury - Inner City
Car: 1997 BA Hardtop - Had a 2003 BJii J48 Sport20, and 2x bg SOHC astina hatches
Posts: 5,011
|
dude put a new main oil seal on it too while u have the box off
__________________
|
02-07-2012, 10:43 AM | #14 |
Senior Member
|
I've got a custom NPC unit and can't fault it. You HAVE to slip it to get off the line smoothly, but it's been slipped for 3 years now and it has yet to slip under load even once.
__________________
|
02-07-2012, 12:03 PM | #15 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
Called npc at 9....they're already making my clutch and pressure plate
|
02-07-2012, 04:00 PM | #16 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
Lets hope they make the right clutch and plate for my car...I told them power above what mine was just to make sure it will handle
|
03-07-2012, 06:13 AM | #18 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
Yeah I've gotta wait until I can fibish work early enough to run up there....also they said they would call me hopefully i don't have to replace the clutch again
|
06-07-2012, 05:46 PM | #19 |
AstinaGT Regular
Join Date: Apr 2012
Location: south brisbane
Car: 1993 BG Astina SP
Posts: 365
|
Npc clutch going in tomorrow as well as new throwout and spigot bearings and machined flywheel
|
06-07-2012, 06:10 PM | #20 |
Senior Member
Join Date: Aug 2009
Location: QLD
Car: ......
Posts: 952
|
Welcome to the monster garage club!
|
|
|